lkml.org 
[lkml]   [2005]   [Jul]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: sysfs abuse in recent i2o changes
Hello,

Greg KH wrote:
> On Wed, Jun 29, 2005 at 10:33:03AM +0200, Markus Lidel wrote:
>
>>Hello,
>>
>>Greg KH wrote:
>>
>>>On Tue, Jun 28, 2005 at 08:08:20PM +0200, Markus Lidel wrote:
>>>
>>>>Greg KH wrote:
>>>>
>>>>>On Tue, Jun 28, 2005 at 05:02:41PM +0200, Markus Lidel wrote:
>>>>>
>>>>>>I know, but i hopefully also have a good reason to do so... First, the
>>>>>>attributes provided through these functions are for accessing the
>>>>>>firmware... The controller has a little limitation, it could only
>>>>>>handle 64 blocks, but sysfs only have 4k...
>>>>>>Now there are two options:
>>>>>>1) when writing: read a 64k block, merge it with the 4k block and write
>>>>>>it back, when reading: read a 64k block and only return the needed 4k
>>>>>>block.
>>>>>>2) extend the sysfs attribute to allow 64k blocks
>>>>>>IMHO the first is not a very good solution, because for a 64k block it
>>>>>>has to be written 16 times...
>>>>>>Of course if someone finds a better solution i would be glad to hear
>>>>>>about it...
>>>>>
>>>>>Use the binary file interface of sysfs, which was written exactly for
>>>>>this kind of thing. :)
>>>>
>>>>Oh i tried to use the binary interface, but i haven't found a way to
>>>>increase the block size beyond 4k, could you please tell me how i could
>>>>adjust it, or where i could read about it?
>>>
>>>Your code should not care about the block size of the data given to you,
>>>as userspace could be giving you 1 byte at a time. Buffer it up
>>
>>The driver don't care about the block size but the device do... Of course
>>you could send 1 byte at a time, but if you do so the controller blows up...
>
> Then you need to prevent this in the kernel.
>
>>>yourself and then write it out to the device when needed.
>>
>>Yep, but this way there is much more code needed to handle it, and also
>>the memory for the buffer may be used longer then just for the read/write...
>
> No, use the firmware interface, that's what it is there for.
>
>
>>>But if you are doing this for firmware, then please use the kernel
>>>firmware interface, it does all of the buffering for you.
>>
>>In my case the interface is for updating the firmware and also to access
>>the configuration settings of the controller... The way to retrieve/store
>>the firmware and the configuration settings is the same, so i still have
>>to implement the sysfs attributes for the configuration settings...
>
> Ok, then use the binary file, and then buffer it up properly yourself,
> like the firmware interface does.
>
>>>Either way, having your own file_ops in sysfs is not allowed.
>>
>>That was the reason i not changed sysfs and only used it in my own
>>module, because i see that it is only needed because of the limitations
>>of the hardware...
>
> No, please don't do this, either use the binary file interface, or the
> firmware one. Don't use your own file_ops.

OK, this doesn't work, because of side effects with buffering, but i'll
remove the new interface, and replace it with the old ioctl interface again.

Thank you very much for your comments.


Best regards,


Markus Lidel
------------------------------------------
Markus Lidel (Senior IT Consultant)

Shadow Connect GmbH
Carl-Reisch-Weg 12
D-86381 Krumbach
Germany

Phone: +49 82 82/99 51-0
Fax: +49 82 82/99 51-11

E-Mail: Markus.Lidel@shadowconnect.com
URL: http://www.shadowconnect.com
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-07-08 13:15    [W:0.064 / U:0.140 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site