Messages in this thread | | | From | Mark Burton <> | Subject | Re: tx queue start entry x dirty entry y (was 8139too PCI IRQ issues) | Date | Mon, 25 Jul 2005 08:30:34 +0200 |
| |
[I'm currently having nasty ISP problems, so I've removed myself from the list for the time-being, as e-mail is struggling to get through to me -- hence the delay in my reply to this, SORRY]
> > Probably it's the miss config of PIC. Can you post more info?
Thanks for helping! :-)))
> > - /proc/interrupt
more /proc/interrupts CPU0 0: 473349 IO-APIC-edge timer 1: 10 IO-APIC-edge i8042 2: 0 XT-PIC cascade 5: 1 IO-APIC-edge soundblaster 7: 2 IO-APIC-edge parport0 9: 8152 IO-APIC-edge aic7xxx 10: 19988 IO-APIC-edge eth0 11: 577 IO-APIC-edge ohci_hcd, ohci_hcd, ohci_hcd, ohci_hcd, eth1 12: 101 IO-APIC-edge i8042 14: 51421 IO-APIC-edge ide0 NMI: 0 LOC: 473350 ERR: 0 MIS: 0
> - mptable
I'm running a single (old) processor, and I dont have mptable installed.... I can't even find a package for it, am I missing something? Sorry!
> - 8259A.pl
perl 8259A.pl irq 0: 00, edge irq 1: 00, edge irq 2: 00, edge irq 3: 00, edge irq 4: 00, edge irq 5: 00, edge irq 6: 00, edge irq 7: 00, edge irq 8: 0a, edge irq 9: 0a, level irq 10: 0a, edge irq 11: 0a, level irq 12: 0a, edge irq 13: 0a, edge irq 14: 0a, edge irq 15: 0a, edge
> - lspci -vvv
0000:00:00.0 Non-VGA unclassified device: Intel Corp. 82378ZB/IB, 82379AB (SIO, SIO.A) PCI to ISA Bridge (rev 88) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0
0000:00:01.0 IDE interface: Silicon Image, Inc. (formerly CMD Technology Inc) PCI0646 (rev 01) (prog-if 8a [Master SecP PriP]) Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (500ns min, 1000ns max) Interrupt: pin A routed to IRQ 14 Region 0: I/O ports at <ignored> Region 1: I/O ports at <ignored> Region 2: I/O ports at <ignored> Region 3: I/O ports at <ignored> Region 4: I/O ports at fc00 [size=16]
0000:00:02.0 SCSI storage controller: Adaptec AIC-7880U Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 248 (2000ns min, 2000ns max), Cache Line Size: 0x08 (32 bytes) Interrupt: pin A routed to IRQ 9 Region 0: I/O ports at f800 [disabled] [size=256] Region 1: Memory at ffbfc000 (32-bit, non-prefetchable) [size=4K]
0000:00:0b.0 VGA compatible controller: Matrox Graphics, Inc. MGA 2064W [Millennium] (rev 01) (prog-if 00 [VGA]) Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Interrupt: pin A routed to IRQ 11 Region 0: Memory at a0000000 (32-bit, non-prefetchable) [size=16K] Region 1: Memory at a0800000 (32-bit, prefetchable) [size=8M] Expansion ROM at d0000000 [disabled] [size=64K]
0000:00:0d.0 USB Controller: Lucent Microelectronics USS-344S USB Controller (rev 11) (prog-if 10 [OHCI]) Subsystem: Lucent Microelectronics USS-344S USB Controller Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 248 (750ns min, 21500ns max) Interrupt: pin A routed to IRQ 11 Region 0: Memory at ffbec000 (32-bit, non-prefetchable) [size=4K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=1 PME-
0000:00:0d.1 USB Controller: Lucent Microelectronics USS-344S USB Controller (rev 11) (prog-if 10 [OHCI]) Subsystem: Lucent Microelectronics USS-344S USB Controller Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 248 (750ns min, 21500ns max) Interrupt: pin A routed to IRQ 11 Region 0: Memory at ffbdc000 (32-bit, non-prefetchable) [size=4K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=1 PME-
0000:00:0d.2 USB Controller: Lucent Microelectronics USS-344S USB Controller (rev 11) (prog-if 10 [OHCI]) Subsystem: Lucent Microelectronics USS-344S USB Controller Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 248 (750ns min, 21500ns max) Interrupt: pin A routed to IRQ 11 Region 0: Memory at ffbcc000 (32-bit, non-prefetchable) [size=4K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=1 PME-
0000:00:0d.3 USB Controller: Lucent Microelectronics USS-344S USB Controller (rev 11) (prog-if 10 [OHCI]) Subsystem: Lucent Microelectronics USS-344S USB Controller Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 248 (750ns min, 21500ns max) Interrupt: pin A routed to IRQ 11 Region 0: Memory at ffbbc000 (32-bit, non-prefetchable) [size=4K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=1 PME-
0000:00:0e.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) Subsystem: Realtek Semiconductor Co., Ltd. RT8139 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 248 (8000ns min, 16000ns max) Interrupt: pin A routed to IRQ 11 Region 0: I/O ports at f400 [size=256] Region 1: Memory at ffbac000 (32-bit, non-prefetchable) [size=256] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1+,D2+,D3hot+,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000:00:14.0 RAM memory: Intel Corp. 450KX/GX [Orion] - 82453KX/GX Memory controller (rev 04) Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
0000:00:19.0 Host bridge: Intel Corp. 450KX/GX [Orion] - 82454KX/GX PCI bridge (rev 04) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- Latency: 32, Cache Line Size: 0x08 (32 bytes)
> --
On 23 Jul 2005, at 21:11, OGAWA Hirofumi wrote:
> Mark Burton <mark@helenandmark.org> writes: > >> Hi, >> I'm getting similar results to Nick Warne, in that when my ethernet is >> stressed at all (for instance by NFS), I end up with >> nfs: server..... not responding, still trying >> nfs: server .... OK >> >> With a realtec card, I get errors in /var/spool/messages along the >> lines of: >> Jul 3 14:31:13 localhost kernel: eth1: Transmit timeout, status 0c >> 0005 c07f media 00. >> Jul 3 14:31:13 localhost kernel: eth1: Tx queue start entry 1160 >> dirty entry 1156. >> Jul 3 14:31:13 localhost kernel: eth1: Tx descriptor 0 is >> 0008a03c. (queue head) > OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |