Messages in this thread | | | Date | Fri, 22 Jul 2005 10:48:05 +0200 | From | Matthias Andree <> | Subject | Re: DriveStatusError BadCRC |
| |
On Fri, 22 Jul 2005, sampei02@tiscali.it wrote:
> I bought new Maxtor HD 80 GB but somthing Fedora Core 3 crashes giving this > message: > > hda: dma_intr: status=0x51 { DriveReady SeekComplete Error } > hda: dma_intr: Error=0x84 { DriveStatusError BadCRC }
> How can I solve it ?
Check your hardware. ATA cables must not exceed 45 cm in length; for Ultra DMA 4, 5 or 6 (66 MByte/s and faster), you need to use 80-wire cables (they need extra ground lines for shielding), and check if all plugs are seated properly.
WRT the backtrace you showed, someone else will have to answer - which kernel version are you using? If it's a Fedora-patched kernel, report the problem to the Fedora project. If it's an older unmodified kernel, retry with a newer kernel (2.6.12.3) first and see if the problem is still present.
-- Matthias Andree - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |