Messages in this thread | | | Date | Tue, 12 Jul 2005 14:25:22 +0200 | From | Adrian Bunk <> | Subject | Re: saa7134 card no longer working |
| |
FYI: This problem is fixed in 2.6.13-rc2-mm2.
On Sun, Jul 10, 2005 at 06:58:39PM +0200, Adrian Bunk wrote: > Hi, > > I observed the following problem with a Tevion MD 9717 card: > > It works in 2.6.12-rc6-mm1, but AFAIR this was the last kernel where it > worked, in more recent kernels (including 2.6.13-rc2-mm1) tvtime only > says "no signal". > > dmesg output with 2.6.12-rc6-mm1: > saa7134[0]: found at 0000:00:0a.0, rev: 1, irq: 6, latency: 32, mmio: 0xcfffcc00 > saa7134[0]: subsystem: 1131:0000, board: Tevion MD 9717 [card=6,insmod option] > saa7134[0]: board init: gpio is 100a0 > saa7134[0]: Huh, no eeprom present (err=-5)? > saa7134[0]: registered device video0 [v4l2] > saa7134[0]: registered device vbi0 > saa7134[0]: registered device radio0 > tuner 4-0060: chip found @ 0xc0 (saa7134[0]) > tuner 4-0060: type set to 5 (Philips PAL_BG (FI1216 and compatibles)) > > In 2.6.13-rc2-mm1 there's an additional line > tuner 4-0060: All bytes are equal. It is not a TEA5767 > > I'm always saying "saa7134.card=6" at the kernel command line since I > got a "no eeprom present" message from the driver without this. > > The card is working with 2.6.12-rc6-mm1, but during running, I > occasionally get the following message in the syslog: > saa7134[0]/audio: audio carrier scan failed, using 5.500 MHz [last detected] > > cu > Adrian - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |