lkml.org 
[lkml]   [2005]   [Apr]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: lirc and Linux 2.6.11
Date
On Thursday 21 Apr 2005 23:26, Shaun Jackman wrote:
> I was using lirc 0.7.0 with Linux 2.6.8.1. Upon upgrading to Linux
> 2.6.11, I recompiled the lirc 0.7.0 hauppauge (lirc_i2c) modules for
> the new kernel. This did not work. I then tried compiling the lirc
> 0.7.1 modules for the new kernel. This didn't work either. The error
> message lircd gives is...
>
> Apr 21 14:57:29 quince lircd 0.7.1: lircd(hauppauge) ready
> Apr 21 14:57:52 quince lircd 0.7.1: accepted new client on /dev/lircd
> Apr 21 14:57:52 quince lircd 0.7.1: could not open /dev/lirc0
> Apr 21 14:57:52 quince lircd 0.7.1: default_init(): No such device
> Apr 21 14:57:52 quince lircd 0.7.1: caught signal
>
> I've also asked the lirc mailing list this question, but has anyone
> else run into this trouble with lirc and Linux 2.6.11?
>

lirc works fine here. Try rebooting, the makefile mknods some arbitrary device
nodes even if you're running devfs or udev, and in my experience they are
broken. If you reboot it usually fixes them. I'm using lirc_i2c with my wintv
remote, which I guess is the same as you.

--
Cheers,
Alistair.

personal: alistair()devzero!co!uk
university: s0348365()sms!ed!ac!uk
student: CS/CSim Undergraduate
contact: 1F2 55 South Clerk Street,
Edinburgh. EH8 9PP.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-04-23 18:29    [W:0.050 / U:0.256 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site