lkml.org 
[lkml]   [2005]   [Feb]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: Linux 2.6.11-rc3 - BT848 no signal
Hello,

I am having the same kind of troubles (can't tune and mt_set_frequency
-121 errors) since 2.6.10 (it was working in 2.6.9) on amd64.
this patch did not help sadely.

log files attached if you have time to look at them :) (the non-working
one being 2.6.11-rc3+your patch)

Cheers,
Mik

Gerd Knorr wrote:
>>>>mt2032_set_if_freq failed with -121
>>
>>OK here you go.
>
>
> Thanks, seems to be a initialization order bug which changes the default
> state of the tda9887 output ports. The patch below should fix that.
>
> Gerd
>
> diff -u linux-2.6.11/drivers/media/video/tda9887.c linux/drivers/media/video/tda9887.c
> --- linux-2.6.11/drivers/media/video/tda9887.c 2005-01-25 11:57:21.000000000 +0100
> +++ linux/drivers/media/video/tda9887.c 2005-02-03 12:26:16.246003021 +0100
> @@ -305,9 +305,9 @@
> printk(" B5 force mute audio: %s\n",
> (buf[1] & 0x20) ? "yes" : "no");
> printk(" B6 output port 1 : %s\n",
> - (buf[1] & 0x40) ? "high" : "low");
> + (buf[1] & 0x40) ? "high (inactive)" : "low (active)");
> printk(" B7 output port 2 : %s\n",
> - (buf[1] & 0x80) ? "high" : "low");
> + (buf[1] & 0x80) ? "high (inactive)" : "low (active)");
>
> printk(PREFIX "write: byte C 0x%02x\n",buf[2]);
> printk(" C0-4 top adjustment : %s dB\n", adjust[buf[2] & 0x1f]);
> @@ -545,9 +545,9 @@
> int rc;
>
> memset(buf,0,sizeof(buf));
> + tda9887_set_tvnorm(t,buf);
> buf[1] |= cOutputPort1Inactive;
> buf[1] |= cOutputPort2Inactive;
> - tda9887_set_tvnorm(t,buf);
> if (UNSET != t->pinnacle_id) {
> tda9887_set_pinnacle(t,buf);
> }
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/

mt2032 spurcheck triggered: 2
mt2032_set_if_freq failed with -121
mt2032_set_if_freq2 failed with -121
mt2032_set_if_freq failed with -121
mt2032_set_if_freq2 failed with -121
bttv0: unloading
bttv: driver version 0.9.15 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
bttv: Bt8xx card found (0).
ACPI: PCI interrupt 0000:00:0c.0[A] -> GSI 17 (level, low) -> IRQ 185
bttv0: Bt878 (rev 17) at 0000:00:0c.0, irq: 185, latency: 64, mmio: 0xf4b00000
bttv0: detected: Pinnacle PCTV [card=39], PCI subsystem ID is 11bd:0012
bttv0: using: Pinnacle PCTV Studio/Rave [card=39,autodetected]
bttv0: gpio: en=00000000, out=00000000 in=00fff3ff [init]
tda9885/6/7: chip found @ 0x86
bttv0: i2c: checking for MSP34xx @ 0x80... not found
bttv0: pinnacle/mt: id=4 info="PAL+SECAM / mono" radio=no
bttv0: using tuner=33
tda9885/6/7: Oops: no tvnorm entry found
tda9885/6/7: writing: b=0xc0 c=0x10 e=0x00
tda9885/6/7: write: byte B 0xc0
B0 video mode : sound trap
B1 auto mute fm : no
B2 carrier mode : Intercarrier
B3-4 tv sound/radio : AM/TV
B5 force mute audio: no
B6 output port 1 : high (inactive)
B7 output port 2 : high (inactive)
tda9885/6/7: write: byte C 0x10
C0-4 top adjustment : 0 dB
C5-6 de-emphasis : no
C7 audio gain : 0
tda9885/6/7: write: byte E 0x00
E0-1 sound carrier : 4.5 MHz
E6 l pll ganting : 13
E2-4 video if : 58.75 MHz
E5 tuner gain : normal
E7 vif agc output : pin3+pin22 port
--
bttv0: i2c: checking for MSP34xx @ 0x80... not found
bttv0: i2c: checking for TDA9875 @ 0xb0... not found
bttv0: i2c: checking for TDA7432 @ 0x8a... not found
bttv0: registered device video0
bttv0: registered device vbi0
bttv0: PLL: 28636363 => 35468950 . ok
tda9885/6/7: configure for: PAL-BG
tda9885/6/7: writing: b=0xd4 c=0x70 e=0x09
tda9885/6/7: write: byte B 0xd4
B0 video mode : sound trap
B1 auto mute fm : no
B2 carrier mode : QSS
B3-4 tv sound/radio : FM/TV
B5 force mute audio: no
B6 output port 1 : high (inactive)
B7 output port 2 : high (inactive)
tda9885/6/7: write: byte C 0x70
C0-4 top adjustment : 0 dB
C5-6 de-emphasis : 50
C7 audio gain : 0
tda9885/6/7: write: byte E 0x09
E0-1 sound carrier : 5.5 MHz
E6 l pll ganting : 13
E2-4 video if : 38.9 MHz
E5 tuner gain : normal
E7 vif agc output : pin3+pin22 port
--
tda9885/6/7: configure for: PAL-BG
tda9885/6/7: writing: b=0xd4 c=0x70 e=0x09
tda9885/6/7: write: byte B 0xd4
B0 video mode : sound trap
B1 auto mute fm : no
B2 carrier mode : QSS
B3-4 tv sound/radio : FM/TV
B5 force mute audio: no
B6 output port 1 : high (inactive)
B7 output port 2 : high (inactive)
tda9885/6/7: write: byte C 0x70
C0-4 top adjustment : 0 dB
C5-6 de-emphasis : 50
C7 audio gain : 0
tda9885/6/7: write: byte E 0x09
E0-1 sound carrier : 5.5 MHz
E6 l pll ganting : 13
E2-4 video if : 38.9 MHz
E5 tuner gain : normal
E7 vif agc output : pin3+pin22 port
--
tda9885/6/7: configure for: PAL-BG
tda9885/6/7: writing: b=0xd4 c=0x70 e=0x09
tda9885/6/7: write: byte B 0xd4
B0 video mode : sound trap
B1 auto mute fm : no
B2 carrier mode : QSS
B3-4 tv sound/radio : FM/TV
B5 force mute audio: no
B6 output port 1 : high (inactive)
B7 output port 2 : high (inactive)
tda9885/6/7: write: byte C 0x70
C0-4 top adjustment : 0 dB
C5-6 de-emphasis : 50
C7 audio gain : 0
tda9885/6/7: write: byte E 0x09
E0-1 sound carrier : 5.5 MHz
E6 l pll ganting : 13
E2-4 video if : 38.9 MHz
E5 tuner gain : normal
E7 vif agc output : pin3+pin22 port
--
tda9885/6/7: configure for: SECAM-L
tda9885/6/7: writing: b=0x44 c=0x10 e=0x0b
tda9885/6/7: write: byte B 0x44
B0 video mode : sound trap
B1 auto mute fm : no
B2 carrier mode : QSS
B3-4 tv sound/radio : AM/TV
B5 force mute audio: no
B6 output port 1 : high (inactive)
B7 output port 2 : low (active)
tda9885/6/7: write: byte C 0x10
C0-4 top adjustment : 0 dB
C5-6 de-emphasis : no
C7 audio gain : 0
tda9885/6/7: write: byte E 0x0b
E0-1 sound carrier : 6.5 MHz / AM
E6 l pll ganting : 13
E2-4 video if : 38.9 MHz
E5 tuner gain : normal
E7 vif agc output : pin3+pin22 port
--
tda9885/6/7: configure for: SECAM-L
tda9885/6/7: writing: b=0x44 c=0x10 e=0x0b
tda9885/6/7: write: byte B 0x44
B0 video mode : sound trap
B1 auto mute fm : no
B2 carrier mode : QSS
B3-4 tv sound/radio : AM/TV
B5 force mute audio: no
B6 output port 1 : high (inactive)
B7 output port 2 : low (active)
tda9885/6/7: write: byte C 0x10
C0-4 top adjustment : 0 dB
C5-6 de-emphasis : no
C7 audio gain : 0
tda9885/6/7: write: byte E 0x0b
E0-1 sound carrier : 6.5 MHz / AM
E6 l pll ganting : 13
E2-4 video if : 38.9 MHz
E5 tuner gain : normal
E7 vif agc output : pin3+pin22 port
--
tda9885/6/7: configure for: SECAM-L
tda9885/6/7: writing: b=0x44 c=0x10 e=0x0b
tda9885/6/7: write: byte B 0x44
B0 video mode : sound trap
B1 auto mute fm : no
B2 carrier mode : QSS
B3-4 tv sound/radio : AM/TV
B5 force mute audio: no
B6 output port 1 : high (inactive)
B7 output port 2 : low (active)
tda9885/6/7: write: byte C 0x10
C0-4 top adjustment : 0 dB
C5-6 de-emphasis : no
C7 audio gain : 0
tda9885/6/7: write: byte E 0x0b
E0-1 sound carrier : 6.5 MHz / AM
E6 l pll ganting : 13
E2-4 video if : 38.9 MHz
E5 tuner gain : normal
E7 vif agc output : pin3+pin22 port

tuner: Ignoring new-style parameters in presence of obsolete ones
tda9887: Ignoring new-style parameters in presence of obsolete ones
bttv: driver version 0.9.15 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
bttv: Bt8xx card found (0).
ACPI: PCI interrupt 0000:00:0c.0[A] -> GSI 17 (level, low) -> IRQ 185
bttv0: Bt878 (rev 17) at 0000:00:0c.0, irq: 185, latency: 64, mmio: 0xf4b00000
bttv0: detected: Pinnacle PCTV [card=39], PCI subsystem ID is 11bd:0012
bttv0: using: Pinnacle PCTV Studio/Rave [card=39,autodetected]
bttv0: gpio: en=00000000, out=00000000 in=00fff3ff [init]
tuner: chip found at addr 0xc0 i2c-bus bt878 #0 [sw]
tda9885/6/7: chip found @ 0x86
bttv0: i2c: checking for MSP34xx @ 0x80... not found
bttv0: pinnacle/mt: id=4 info="PAL+SECAM / mono" radio=no
bttv0: using tuner=33
tda9885/6/7: Oops: no tvnorm entry found
tda9885/6/7: writing: b=0xc0 c=0x10 e=0x00
tda9885/6/7: write: byte B 0xc0
B0 video mode : sound trap
B1 auto mute fm : no
B2 carrier mode : Intercarrier
B3-4 tv sound/radio : AM/TV
B5 force mute audio: no
B6 output port 1 : high
B7 output port 2 : high
tda9885/6/7: write: byte C 0x10
C0-4 top adjustment : 0 dB
C5-6 de-emphasis : no
C7 audio gain : 0
tda9885/6/7: write: byte E 0x00
E0-1 sound carrier : 4.5 MHz
E6 l pll ganting : 13
E2-4 video if : 58.75 MHz
E5 tuner gain : normal
E7 vif agc output : pin3+pin22 port
--
tuner: type set to 33 (MT20xx universal) by bt878 #0 [sw]
tuner: MT2032 hexdump:
24 27 ff 0f 1f f7 e4 8c c3 4e ec d4 0a 32 28 22
ff 4d 54 04 04
tuner: microtune: companycode=4d54 part=04 rev=04
mt2032: xogc = 0x07
mt2032: xok = 0x00
mt2032: xogc = 0x06
mt2032: xogc = 0x06
mt2032: xok = 0x00
mt2032: xogc = 0x05
mt2032: xogc = 0x05
mt2032: xok = 0x00
mt2032: xogc = 0x04
mt2032: xogc = 0x04
mt2032: xok = 0x00
mt2032: xogc = 0x03
tuner: microtune MT2032 found, OK
bttv0: i2c: checking for MSP34xx @ 0x80... not found
bttv0: i2c: checking for TDA9875 @ 0xb0... not found
bttv0: i2c: checking for TDA7432 @ 0x8a... not found
bttv0: registered device video0
bttv0: registered device vbi0
bttv0: PLL: 28636363 => 35468950 . ok
\
 
 \ /
  Last update: 2005-03-22 14:10    [W:0.110 / U:0.232 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site