Messages in this thread | | | Date | Mon, 14 Feb 2005 22:36:23 +0100 | From | Carl-Daniel Hailfinger <> | Subject | Re: [ACPI] Call for help: list of machines with working S3 |
| |
Pavel Machek schrieb: > Hi! > > Stefan provided me initial list of machines where S3 works (including > video). If you have machine that is not on the list, please send me a > diff. If you have eMachines... I'd like you to try playing with > vbetool (it worked for me), and if it works for you supplying right > model numbers. > > Pavel > > > Video issues with S3 resume > ~~~~~~~~~~~~~~~~~~~~~~~~~~~ > 2003-2005, Pavel Machek > > During S3 resume, hardware needs to be reinitialized. For most > devices, this is easy, and kernel driver knows how to do > it. Unfortunately there's one exception: video card. Those are usually > initialized by BIOS, and kernel does not have enough information to > boot video card. (Kernel usually does not even contain video card > driver -- vesafb and vgacon are widely used). > > This is not problem for swsusp, because during swsusp resume, BIOS is > run normally so video card is normally initialized. S3 has absolutely > no change to work with SMP/HT. Be sure it to turn it off before > testing (swsusp should work ok, OTOH). > > There are few types of systems where video works after S3 resume: > > (1) systems where video state is preserved over S3. > > (2) systems where it is possible to call video bios during S3 > resume. Unfortunately, it is not correct to call video BIOS at that > point, but it happens to work on some machines. Use > acpi_sleep=s3_bios. > > (3) systems that initialize video card into vga text mode and where BIOS > works well enough to be able to set video mode. Use > acpi_sleep=s3_mode on these. > > (4) on some systems s3_bios kicks video into text mode, and > acpi_sleep=s3_bios,s3_mode is needed. > > (5) radeon systems, where X can soft-boot your video card. You'll need > patched X, and plain text console (no vesafb or radeonfb), see > http://www.doesi.gmxhome.de/linux/tm800s3/s3.html.
(5) machines should also work with (6), but not the other way round.
> > (6) other radeon systems, where vbetool is enough to bring system back > to life. Do vbetool vbestate save > /tmp/delme; echo 3 > /proc/acpi/sleep; > vbetool post; vbetool vbestate restore < /tmp/delme; setfont > <whatever>, and your video should work.
(6) has to be done from a text console! It should work for all radeon systems, btw.
> > Now, if you pass acpi_sleep=something, and it does not work with your > bios, you'll get hard crash during resume. Be carefull. Also it is > safest to do your experiments with plain old VGA console. vesafb and > radeonfb (etc) drivers have tendency to crash the machine during resume. > > You may have system where none of above works. At that point you > either invent another ugly hack that works, or write proper driver for > your video card (good luck getting docs :-(). Maybe suspending from X > (proper X, knowing your hardware, not XF68_FBcon) might have better > chance of working. > > Table of known working systems: > > Model hack (or "how to do it") > ------------------------------------------------------------------------------ > IBM TP R32 / Type 2658-MMG none (1) > Athlon HP Omnibook XE3 none (1) > Compaq Armada E500 - P3-700 none (1) (S1 also works OK) > IBM t41p none (1) > Athlon64 desktop prototype s3_bios (2) > HP NC6000 s3_bios (2) > Toshiba Satellite 4080XCDT s3_mode (3) > Toshiba Satellite 4030CDT s3_mode (3) > Dell D600, ATI RV250 vga=normal (**)
The Dell system above should also work fine with vbestate.
> Asus L2400D s3_mode (3)(***) (S1 also works OK) > Toshiba Satellite P10-554 s3_bios,s3_mode (4)(****) > Acer TM 800 vga=normal, X patches, see webpage (5) > Athlon64 Arima W730a vbestate needed (6) > eMachines athlon64 machines vbestate needed (6) (someone please get me model #s)
Samsung P35 vbestate needed (6)
> > (**) Text console is "strange" after resume. Backlight is switched on again > by the X server. X server is: > | X Window System Version 6.8.1.904 (6.8.2 RC 4) > | Release Date: 2 February 2005 > | X Protocol Version 11, Revision 0, Release 6.8.1.904 > | Build Operating System: SuSE Linux [ELF] SuSE > as present in SUSE 9.3preview3. > > (***) To be tested with a newer kernel. > > (****) Not with SMP kernel, UP only.
Regards, Carl-Daniel -- http://www.hailfinger.org/ - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |