lkml.org 
[lkml]   [2004]   [Jul]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: Init single and Serial console : How to ?
Date
Hello,

> this is only about terminal settings like flags and line
> speed, it is not
> related to presenting the login on the serial console. It is
> a good idea to
> remove this file and set the baud rate on the boot command line.
OK.

> You must configure /sbin/sulogin which is called from init to run on
> /dev/console, then you will be fine. Also you should start a getty on
OK, but remember that my problem is to find a way to access the machine
when I only have a serial console and it doesn't complete the "classical"
boot process because some init script at runlevel 3 is blocking...

This means that I can't go up to the "configure /sbin/sulogin", and need
a way to be given a serial prompt only by giving parameter at the LILO
prompt, considering that the kernel has already been configured for serial
console.

> /dev/ttySx for multi user modes (see the serial console howto)
This is already done.

Regards,
Paul

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 14:04    [W:1.949 / U:0.084 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site