lkml.org 
[lkml]   [2004]   [May]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: Getting i815 Framebuffer working?!
Date
On Friday 07 May 2004 07:57, James Lamanna wrote:

> Relevant Statements from dmesg:
> agpgart: Detected an Intel i815 Chipset.
> agpgart: Maximum main memory to use for agp memory: 438M
> agpgart: AGP aperture is 64M @ 0xe0000000
> i810fb: probe of 0000:00:02.0 failed with error -22
> ^^^^ Not promising... :)

Make sure you set hsync1, hsync2 , vsync1 and vsync2 in your boot parameters.

For monitors that can do 1024x768@50Hz, the following should work.

hysnc1 = 30, hsync2 = 48, vsync1= 50 vsync2 = 85

Tony



-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 14:03    [W:0.024 / U:0.272 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site