Messages in this thread | | | From | Marcin Garski <> | Subject | Re: SiI3112 Serial ATA - no response on boot | Date | Wed, 12 May 2004 18:51:42 +0200 |
| |
[Please CC me on replies, I am not subscribed to the list, thanks]
Marco Adurno wrote: > I've got the same problem some time ago. > You have just to appen the string > hdg=none > in your boot loader config file
Thanks, that's working. But isn't that a workaround for problem with probe (on NON SATA HDD probe don't generate such errors) that should be fixed somehow?
> Marcin Garski wrote: > > > > Hi, > > > > I have a Abit NF7-S V2.0 mainboard (nForce2 chipset + SiI3112 > > SATA), with Seagate S-ATA connected to Sil3112. > > > > During boot i get following messages: > > SiI3112 Serial ATA: IDE controller at PCI slot 0000:01:0b.0 > > SiI3112 Serial ATA: chipset revision 2 > > SiI3112 Serial ATA: 100% native mode on irq 11 > > ide2: MMIO-DMA , BIOS settings: hde:pio, hdf:pio > > ide3: MMIO-DMA , BIOS settings: hdg:pio, hdh:pio > > hde: ST380013AS, ATA DISK drive > > ide2 at 0xe083c080-0xe083c087,0xe083c08a on irq 11 > > hdg: no response (status = 0xfe) > > hdg: no response (status = 0xfe), resetting drive > > hdg: no response (status = 0xfe) > > > > Each "no response" message delays booting about 20 seconds. > > I don't have any device connected to hdg. > > I was wondering how to speed up booting, because this "hdg: no > > response (status = 0xfe), resetting drive" info is little > > irritating? I'm running on 2.6.6 kernel (on 2.6.4 this "no > > response" messages also appear).
-- Best Regards Marcin Garski - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |