Messages in this thread | | | Subject | Re: tg3 error | From | Alexander Hoogerhuis <> | Date | Sat, 03 Apr 2004 20:56:39 +0200 |
| |
"Kamil Srot" <kamil.srot@nlogy.com> writes:
>> Felix von Leitner wrote: >> > A machine at a customer's site (running kernel 2.4.21) has stopped >> > answering over Ethernet today. The machine itself was still there and >> > the customer could log in at the console. A reboot fixed the problem. >> > >> > The machine has had these error messages in the syslog about once per >> > hour for about 24 hours: >> > >> > Mar 9 16:17:38 mail2 kernel: tg3: eth0: transmit timed out, resetting >> > Mar 9 16:17:38 mail2 kernel: tg3: tg3_stop_block timed out, ofs=3400 > enable_bit=2 >> > Mar 9 16:17:39 mail2 kernel: tg3: tg3_stop_block timed out, ofs=2400 > enable_bit=2 >> > Mar 9 16:17:39 mail2 kernel: tg3: tg3_stop_block timed out, ofs=1400 > enable_bit=2 >> > Mar 9 16:17:39 mail2 kernel: tg3: tg3_stop_block timed out, ofs=c00 > enable_bit=2 >> >> >> AFAIK this is fixed in the latest upstream tg3... > > I have exactly the same problems in 2.4.25 - the log says exactly the same > as for Felix. > I'm running two identical HP ProLiant servers but have this problem only on > one of them. > It's happening approximately twice a week. > > Any ideas? >
Just to pipe in; I have a machine (HP 530cmt) running RHEL3 no the latest kernel, running with the tg3-driver for the onboard eth, and if requires the i/f to be taken down and up again to start speaking, or even negotiating an eth-link. Hardware at the other end is a cisco switch.
mvh, A -- Alexander Hoogerhuis | alexh@boxed.no CCNP - CCDP - MCNE - CCSE | +47 908 21 485 "You have zero privacy anyway. Get over it." --Scott McNealy - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |