lkml.org 
[lkml]   [2004]   [Nov]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: dmi_scan on x86_64
Date
On 04.11.2004, at 10:12, Jean Delvare wrote:

> I think I also remember of a board where fan inputs were somehow
> multiplexed (the board had six fan headers, all of them reported speeds
> in the BIOS setup screen, but the hardware monitoring chip would only
> have three tachometers inputs.) I can't seem to remember the brand and
> model, and we did not investigate the problem deep enough to propose a
> solution back then anyway.

The sensors conf for the S2875 provided by Tyan only displays
3 FAN RPM values while the board has at least 4. At the moment I'm
using 3 fans with tacho signal but can only determine 2 values, the
third value is constantly 0.

Also the setup puzzles me a bit; why would Tyan pack several SMBus
setups into a single motherboard but only connect devices to one
of them. Actually sensors-detect claims that there is one
unrecognized client on the "unused" SMBus.

Servus,
Daniel
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2005-03-22 14:07    [W:1.619 / U:0.464 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site