lkml.org 
[lkml]   [2004]   [Nov]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [IDE] Need assistance on a Silicon Image 680-based board
From
Date
On Sul, 2004-11-28 at 15:09, Eric Brundick wrote:
> Apparently the manufacturer used 0095 for the vendor ID, rather than 1095 as is listed for Silicon Image in
> drivers/pci/pci.ids. Hoping that's all it is, I modified drivers/pci/pci.ids and changed the PCI ID for
> Silicon Image/CMD to 0095, and did the same in include/linux/pci_ids.h.
> Rebuilt the kernel, building siimage as a module (siimage.ko)
>

Remove the card, clean the connectors, reinsert the card. If that fails
try a different slot, if that fails replace the card. You are losing
bits in hardware somewhere.

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 14:08    [W:0.032 / U:0.128 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site