lkml.org 
[lkml]   [2004]   [Nov]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    SubjectRe: 2.6.10-rc2 doesn't boot (if no floppy device)
    From
    Date
    On Sat, 2004-11-20 at 07:40, Adrian Bunk wrote:
    > On Sat, Nov 20, 2004 at 04:02:04AM -0500, Len Brown wrote:
    >
    > > Please try this updated debug patch.
    > >
    > > It clears the ELCR on Linux boot.

    > With your patch, the boot failure goes away.
    > This was with a kernel without Linus' patch applied.

    Thanks for running this test Adrian.

    >
    > BTW: Is all what ACPI does really required, if all I need ACPI for is
    > to turn the power off after halting my computer?

    On this system ACPI is required to configure the IOAPIC.

    It may be possible to save power in idle with c-states
    and at run-time with p-states (cpufreq) on this box,
    but I couldn't tell that from the dmesg if CONFIG_ACPI_PROCESSOR
    was included or not.

    If you don't care about interrupt performance and you don't
    mind pressing the power button when you halt the system,
    go ahead and run with CONFIG_ACPI=n.

    cheers,
    -Len


    -
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

    \
     
     \ /
      Last update: 2005-03-22 14:08    [W:3.170 / U:0.076 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site