lkml.org 
[lkml]   [2004]   [Nov]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: Linux 2.6.9-ac10
On Thu, Nov 18, 2004 at 02:50:16PM +0000, Alan Cox wrote:
> The it8212 still doesn't default to DMA on - that is on the TODO list. The

Are you sure?

# hdparm -v /dev/hdg

/dev/hdg:
multcount = 16 (on)
I/O support = 0 (default 16-bit)
unmaskirq = 1 (on)
using_dma = 1 (on)
keepsettings = 0 (off)
nowerr = 0 (off)
readonly = 0 (off)
readahead = 256 (on)
geometry = 24321/255/63, sectors = 390721968, start = 0
busstate = 1 (on)

IT8212: IDE controller at PCI slot 0000:03:05.0
IT8212: chipset revision 17
IT8212: 100% native mode on irq 29
ide2: BM-DMA at 0x4420-0x4427, BIOS settings: hde:pio, hdf:pio
it8212: controller in pass through mode.
ide3: BM-DMA at 0x4428-0x442f, BIOS settings: hdg:DMA, hdh:pio
Probing IDE interface ide2...
Probing IDE interface ide3...
hdg: WDC WD2000JB-00FUA0, ATA DISK drive
ide3 at 0x4410-0x4417,0x441a on irq 29
hdg: max request size: 1024KiB
hdg: 390721968 sectors (200049 MB) w/8192KiB Cache, CHS=24321/255/63,
UDMA(100)
hdg: cache flushes supported
hdg: hdg1

--
Red herrings strewn hither and yon.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 14:08    [W:0.027 / U:0.340 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site