Messages in this thread | | | Date | Wed, 17 Nov 2004 04:47:27 -0200 | From | Marcelo Tosatti <> | Subject | Re: 2.4.27 and CCISS related problem |
| |
Hi,
On Wed, Nov 17, 2004 at 11:30:23AM +0200, Atro Tossavainen wrote: > Hello all, > > Got a problem with a HP Proliant DL380 with root on a RAID1 behind a > Smart Array 5i+. It boots up fine with 2.4.25, but halts every time > with 2.4.27. The following message should be printed: > > HP CISS Driver (v 2.4.50) > cciss: Device 0xb178 has been found at bus 1 dev 3 func 0 > blocks= 71122560 block_size= 512 > heads= 255, sectors= 32, cylinders= 8716 RAID 1(0+1) > > blk: queue c04c6c40, I/O limit 4294967295Mb (mask 0xffffffffffffffff) > Partition check: > cciss/c0d0: p1 p2 < p5 p6 p7 p8 > > > But instead, it prints: > > blk: queue c04c6c40, I/O limit 4294967295Mb (mask 0xffffffffffffffff) > Partition check: > cciss/c0d0: > > and freezes there, but not so badly that Ctl-Alt-Del wouldn't let me > reboot. Anybody got any ideas? The kernels I am using are based on > Linus' from ftp.funet.fi, with i2c, lm_sensors and MOSIX added in. > I can try with a completely vanilla 2.4.27 if necessary.
Please try vanilla v2.4.27.
If that doesnt work, go down to v2.4.26.
Both of them contain cciss updates. - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |