Messages in this thread Patch in this message | | | Subject | Re: [PATCH] PCI fixes for 2.6.10-rc1 | Date | Fri, 12 Nov 2004 15:22:01 -0800 | From | Greg KH <> |
| |
ChangeSet 1.2091.1.24, 2004/11/12 14:12:11-08:00, hannal@us.ibm.com
[PATCH] pplus.c: replace pci_find_device with pci_get_device
Signed-off-by: Hanna Linder <hannal@us.ibm.com> Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
arch/ppc/platforms/pplus.c | 9 +++++---- 1 files changed, 5 insertions(+), 4 deletions(-)
diff -Nru a/arch/ppc/platforms/pplus.c b/arch/ppc/platforms/pplus.c --- a/arch/ppc/platforms/pplus.c 2004-11-12 15:09:04 -08:00 +++ b/arch/ppc/platforms/pplus.c 2004-11-12 15:09:04 -08:00 @@ -359,7 +359,7 @@ * Perform specific configuration for the Via Tech or * or Winbond PCI-ISA-Bridge part. */ - if ((dev = pci_find_device(PCI_VENDOR_ID_VIA, + if ((dev = pci_get_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_1, dev))) { /* * PPCBUG does not set the enable bits @@ -371,7 +371,7 @@ pci_write_config_byte(dev, 0x40, reg); } - if ((dev = pci_find_device(PCI_VENDOR_ID_VIA, + if ((dev = pci_get_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_2, dev)) && (dev->devfn = 0x5a)) { /* Force correct USB interrupt */ @@ -379,7 +379,7 @@ pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq); } - if ((dev = pci_find_device(PCI_VENDOR_ID_WINBOND, + if ((dev = pci_get_device(PCI_VENDOR_ID_WINBOND, PCI_DEVICE_ID_WINBOND_83C553, dev))) { /* Clear PCI Interrupt Routing Control Register. */ short_reg = 0x0000; @@ -389,7 +389,7 @@ pci_write_config_byte(dev, 0x43, reg); } - if ((dev = pci_find_device(PCI_VENDOR_ID_WINBOND, + if ((dev = pci_get_device(PCI_VENDOR_ID_WINBOND, PCI_DEVICE_ID_WINBOND_82C105, dev))) { /* * Disable LEGIRQ mode so PCI INTS are routed @@ -401,6 +401,7 @@ dev->irq = 14; pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq); } + pci_dev_put(dev); } void __init pplus_set_VIA_IDE_legacy(void) - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |