Messages in this thread | | | Date | Fri, 2 Jan 2004 14:20:31 +0100 | From | Vojtech Pavlik <> | Subject | Re: 2.6.1-rc1 with JP106 keyboard |
| |
On Fri, Jan 02, 2004 at 02:46:07PM +0900, Go Taniguchi wrote:
> And more.... > > mae-kouho/henkan (scancode 0x79) 92 -> 184 > mu-henkan (scancode 0x7b) 94 -> 185 > > - 85, 86, 90, 91, 92, 93, 14, 94, 95, 79,183, 75, 71,121, 0,123, > + 0, 86,193,192,184, 0, 14,185, 0, 79,182, 75, 71,124, 0, 0, > ^ 0x79 ^ 0x7b > These are input method control keys.
Again, this is per (microsoft [*]) specification. These keys should, however, give the very same scancodes to X as they did on 2.4.
[*] I used this specification, because that's what the keyboard manufacturers seem to follow recently.
> Go Taniguchi wrote: > >> > >>Vojtech Pavlik: > >> o Fixes for keyboard 2.4 compatibility > >> > > > >Hi, > >2.6.1-rc1 with JP106 keybord. keycode was changed.... > > 2.6.0 -> 2.6.1-rc1 > >lower-right backslash (scancode 0x73) 89 -> 181 > >upper-right backslash (scancode 0x7d) 183 -> 182 > > > >at atkbd_set2_keycode in drivers/input/keyboard/atkbd.c > > > >- 122, 89, 40,120, 26, 13, 0, 0, 58, 54, 28, 27, 0, 43, 0, 0, > >+ 0,181, 40, 0, 26, 13, 0, 0, 58, 54, 28, 27, 0, 43, 0,194, > > ^ scancode 0x73 > > > >- 85, 86, 90, 91, 92, 93, 14, 94, 95, 79,183, 75, 71,121, 0,123, > >+ 0, 86,193,192,184, 0, 14,185, 0, 79,182, 75, 71,124, 0, 0, > > ^ scancode 0x7d > >Is this correct? > >2.6.0 is OK, but 2.6.1-rc1 does not get [|/_] keys. >
-- Vojtech Pavlik SuSE Labs, SuSE CR - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |