Messages in this thread | | | From | Andreas Schwarz <> | Subject | Re: irq 12: nobody cared! (2.6.0-test6) | Date | Tue, 30 Sep 2003 10:38:48 +0000 (UTC) |
| |
Felipe Alfaro Solana wrote: > On Mon, 2003-09-29 at 08:56, Meelis Roos wrote: >> This is Linux 2.6.0-test6 on a PC with VIA KT133A chipset (MSI MS-6330 >> mainboard), PS/2 keyboard, USB mouse. In test5 it hung on boot just >> after printing >> mice: PS/2 mouse device common for all mice >> input: PC Speaker >> >> In 2.6.0-test6, it spits out several "irq 12: nobody cared!" messages >> with backtraces and then continues as if nothing happened. The system >> works fine, PS/2 keyboard and USB mouse both work too. Similar >> configuration (PS/2 keyboard + USB mouse) works fine on an i815 chipset >> computer. > > Have you tried with 2.6.0-test6-mm1? It includes a fix for ACPI PCI > routing which may help in your case.
I get the following message at boot with 2.6.0-test6-mm1: =========================================================
irq 12: nobody cared! Call Trace: [<c010b6ca>] __report_bad_irq+0x2a/0x90 [<c010b7c0>] note_interrupt+0x70/0xb0 [<c010bab0>] do_IRQ+0x130/0x140 [<c0109c88>] common_interrupt+0x18/0x20 [<c0120b90>] do_softirq+0x40/0xa0 [<c010ba86>] do_IRQ+0x106/0x140 [<c0109c88>] common_interrupt+0x18/0x20 [<c010c03e>] setup_irq+0x9e/0xf0 [<c027c5e0>] i8042_interrupt+0x0/0x190 [<c010bb68>] request_irq+0xa8/0xe0 [<c03c5e3d>] i8042_check_mux+0x3d/0x170 [<c027c5e0>] i8042_interrupt+0x0/0x190 [<c03c63a5>] i8042_init+0x115/0x150 [<c03ae74c>] do_initcalls+0x2c/0xa0 [<c012ca8f>] init_workqueues+0xf/0x30 [<c01050d2>] init+0x32/0x140 [<c01050a0>] init+0x0/0x140 [<c0107149>] kernel_thread_helper+0x5/0xc
handlers: [<c027c5e0>] (i8042_interrupt+0x0/0x190) Disabling IRQ #12 irq 12: nobody cared! Call Trace: [<c010b6ca>] __report_bad_irq+0x2a/0x90 [<c010b7c0>] note_interrupt+0x70/0xb0 [<c010bab0>] do_IRQ+0x130/0x140 [<c0109c88>] common_interrupt+0x18/0x20 [<c0120b90>] do_softirq+0x40/0xa0 [<c010ba86>] do_IRQ+0x106/0x140 [<c0109c88>] common_interrupt+0x18/0x20 [<c010c03e>] setup_irq+0x9e/0xf0 [<c027c5e0>] i8042_interrupt+0x0/0x190 [<c010bb68>] request_irq+0xa8/0xe0 [<c03c5fa5>] i8042_check_aux+0x35/0x160 [<c027c5e0>] i8042_interrupt+0x0/0x190 [<c03c637c>] i8042_init+0xec/0x150 [<c03ae74c>] do_initcalls+0x2c/0xa0 [<c012ca8f>] init_workqueues+0xf/0x30 [<c01050d2>] init+0x32/0x140 [<c01050a0>] init+0x0/0x140 [<c0107149>] kernel_thread_helper+0x5/0xc
handlers: [<c027c5e0>] (i8042_interrupt+0x0/0x190) Disabling IRQ #12
-- AVR-Tutorial, über 350 Links Forum für AVRGCC und MSPGCC -> http://www.mikrocontroller.net
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |