Messages in this thread | ![/](/images/icornerl.gif) | | From | "Michal Semler (volny.cz)" <> | Subject | Re: 3C59x module doesn't work in 2.6.0-test6 | Date | Mon, 29 Sep 2003 19:30:57 +0200 |
| |
Hi,
I call simply "modprobe 3c59x" as always. In all previous kernels before 2.6.0-test6 it worked (2.4,2.2)
/etc/modprobe.conf alias eth0 3c59x options 3c59x 3c509x debug=0 options=4,8
It's generated from /etc/modules.conf in 2.4 alias eth0 3c59x options 3c59x 3c509x debug=0 options=4,8
And looks the same
Info about card from 2.4.22:
3c59x: Donald Becker and others. www.scyld.com/network/vortex.html See Documentation/networking/vortex.txt 01:0a.0: 3Com PCI 3c905B Cyclone 100baseTx at 0xcc00. Vers LK1.1.18-ac 00:50:04:6a:58:cd, IRQ 10 product code 544e rev 00.9 date 02-17-99 Internal config register is 1800000, transceivers 0xa. 8K byte-wide RAM 5:3 Rx:Tx split, autoselect/Autonegotiate interface. MII transceiver found at address 24, status 782d. Enabling bus-master transmits and whole-frame receives. 01:0a.0: scatter/gather enabled. h/w checksums enabled
Michal
Dne po 29. září 2003 19:14 jste napsal(a): > On Sun, 28 Sep 2003 15:02:38 +0200 "Michal Semler (volny.cz)" <cijoml@volny.cz> wrote: > | Hi, > | > | I compiled 2.6.0-test6, but my ethernet card doesn't work: > | > | modprobe 3c59x tells this: > | Sep 28 10:06:58 tata kernel: 3c59x: Unknown parameter `3c509x' > > So 3c59x complains about '3c509x' ?? > > Did you use any module parameters, either on the modprobe command > or in the /etc/modprobe.conf file? > > -- > ~Randy
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| ![\](/images/icornerr.gif) |