lkml.org 
[lkml]   [2003]   [Aug]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: 2.4.22pre8 hangs too (Re: 2.4.21-jam1 solid hangs)
On Wed, Aug 27, 2003 at 11:30:27AM +0200, you [Stephan von Krawczynski] wrote:
>
> Hm, did you try a serial console? On my side this was a big step forward.

Do you mean in your case nothing shown on monitor (I've disabled monitor
blanking, so that is not it), sysrq key didn't work, nmi watchdog didn't
trigger but you were still able to get output from serial console? An oops?

Or, did you use kdb/kgdb in addition to serial console?

> If you experience complete hangs it may be something around hanging
> interrupts.

Probably, yes.

> Did you play with apic/acpi etc. to try different interrupt handling?

ACPI has never been enabled. I enabled local APIC when I enabled nmi
watchdog, so I've tried it on and off.

> What does your /proc/interrupts look like compared between 2.2 and 2.4 ?

I don't have 2.2 output at hand, but the 2.4.21-jam1 output doesn't seem too
suspicious:

cat /proc/interrupts
CPU0
0: 1675428 XT-PIC timer
1: 3 XT-PIC keyboard
2: 0 XT-PIC cascade
4: 19625 XT-PIC serial
9: 25447 XT-PIC aic7xxx
11: 25203 XT-PIC eth0
12: 0 XT-PIC PS/2 Mouse
14: 178082 XT-PIC ide0
NMI: 16763
LOC: 1675326
ERR: 0



-- v --

v@iki.fi
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:48    [W:0.081 / U:0.076 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site