Messages in this thread | ![/](/images/icornerl.gif) | | Date | Tue, 8 Jul 2003 14:25:19 +0200 | From | Miquel van Smoorenburg <> | Subject | Re: siimage, 2.5.74 and irq 19: nobody cared! |
| |
On 2003.07.08 14:16, Bartlomiej Zolnierkiewicz wrote: > On Tue, 8 Jul 2003, Miquel van Smoorenburg wrote: > > > I was running 2.5.72-mm2 on our transit usenet news server > > (700 GB in/day and 1 TB out/day) which ran just fine, until I > > had some ext3 corruption on the /news partition. I remember > > having seen something about this in the -mm changelogs. > > > > So I tried 2.5.74 and 2.5.74-mm2, but with those kernels the > > siimage.c driver doesn't work. The card is detected, but a bit > > later in the boot process its IRQ is disabled and it won't work. > > Log is below. As said, it worked fine with 2.5.72-mm2 (OK, needed > > to enabled UDMA with hdparm, but other than that, no problems): > > Hi, > > Please send dmesg from 2.5.62-mm2 and 'lspci -vvv' output.
You mean dmesg and lspci -vvv output of both 2.5.72-mm2 and 2.5.74 ? Will do, as soon as I have a chance to play with the system again. It's a newsfeeder, a few minutes downtime is not a problem, but I had some serious problems and it was down for 2 hours - now it needs several hours to "catch up" before I can take it down again.
Mike. - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| ![\](/images/icornerr.gif) |