lkml.org 
[lkml]   [2003]   [Jul]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectTulip and Adaptec 6922
Date
Jeff,
I noticed a problem with the tulip driver on this particular card, it
may just be me. I have the adaptec 6922 dual port card installed in my
server, runs great with the tulip driver, but at start up I have do
something that is quite not the norm. Most of the time it works, if I do a
warm restart but I do a cold restart I have to do the following to get my
network card to recoginze both ports.

Boot up and wait till everything is loaded, stop the network services.
Remove the tulip driver. Modprobe the tulip driver and restart network
services, and then I either start all the services looking for the eth1
adapter or just do a warm boot.

If you need a card to play around with, I have a spare one laying around I
can send you.

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:47    [W:0.032 / U:0.664 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site