Messages in this thread | | | Date | Wed, 2 Jul 2003 16:36:02 -0400 | From | Wil Reichert <> | Subject | Re: highpoint driver problem, 2.4.21-ac4 |
| |
> > The on-board Highpoint controller (HPT372A) on my DFI NF2 is having > > issue. Loading the hptraid module results in a 'No such device' > > message while the hpt366 module segfaults and leaves an oops in my > > logs. These errors occur regardless of the disk/raid configuration > > in the hpt BIOS. Following are the oops trace, an lsmod, the > > .config and a lspci -vvv. > > The crash occurs in the hpt366 module. Loading hptraid will not work > because it depends on the kernel to claim the disks of the raid volume > (that is what hpt366 would do). I will add autoloading of the > ide-controller module in the next raid-driver release. However, I do not > know why the kernel oopses. You might want to try to build the hpt366 > code into the kernel instead of a module. If it works it would probably > mean that "ide_hwif_t *hwif" was not properly initalized. I initially had all the hpt modules built into the kernel, but that would also produce an oops and die immediately after ID'ing the two drives I have on attached. Would any more information be of use to you?
Wil - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |