lkml.org 
[lkml]   [2003]   [Jul]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: libata driver update posted
Martin Schlemmer wrote:
> On Fri, 2003-07-18 at 17:43, Jeff Garzik wrote:
>
> Slower this side. The Maxtor 40GB (ata133) is however just set to
> udma33, where the Seagate 20GB (ata100) driver is set correctly to
> udma100.

Yeah, that's expected: Parallel ATA (PATA) requires cable detection to
go beyond UDMA/33, and my driver doesn't do that yet [since I'm
concentrating on SATA].


> The Seagate start off ok (about 35mb/s), but then after doing some heavy
> disk io, it also just drops to the 20mb/s region.

That's definitely interesting. Is "heavy disk I/O" the hdparm stuff you
described, or something else too?

Jeff



-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:47    [W:0.072 / U:0.108 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site