Messages in this thread | | | From | "Andrew S. Johnson" <> | Subject | Re: i2c-proc module | Date | Thu, 17 Jul 2003 21:30:27 -0500 |
| |
On Thursday 17 July 2003 06:28 am, Ed Sweetman wrote: > Andrew S. Johnson wrote: > > I2C wants an i2c-proc module, but I can't find where > > to config it. Something like this happens when I run sensors: > > > > /proc/sys/dev/sensors/chips or /proc/bus/i2c unreadable; > > Make sure you have done 'modprobe i2c-proc'! > > > > There was an i2c-proc module with lm_sensors 2.7.0. What > > am I missing? > > > > Andy Johnson > > > lm_sensors uses sysfs now. Not proc. Sensors hasn't been updated. You'll > have to use cat.
It seems that by trial and error I figured it out. There's a i2c-dev module that I have to load first, then via686a, then i2c-isa. This order is different than with lm_sensors under 2.4 kernels. Also, the i2c-viapro was required before, but now it doesn't seem to do anything.
Thanks for helping,
Andy Johnson
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |