lkml.org 
[lkml]   [2003]   [Jul]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: Onstream DI-30 not responding 2.6

Hi,

ide-tape driver is broken right now in 2.6.
Config option for it is commented out because
it even doesn't compile (easy to fix).

I can help a bit if somebody wants to fix this driver.
--
Bartlomiej

On Thu, 17 Jul 2003, Stef van der Made wrote:
>
> Hi
>
> I'm trying to use my Onstream DI-30 (IDE) tape device with Kernel
> 2.6.0-test1. When trying to access the drive using the old 2.2 kernels
> and 2.4 these commands worked fine
>
> bash-2.05# mt -f /dev/nht0 status
> /dev/nht0: No such device
> bash-2.05# mt -f /dev/ht0 status
> /dev/ht0: No such device
> bash-2.05# mt -f /dev/hdd status
> /dev/hdd: No such device or address
> bash-2.05# mt -f /dev/hdc status
> /dev/hdc: No such device or address
>
> While they now are showing ugly errors.
>
> This is a part of the boot log
>
> VP_IDE: IDE controller at PCI slot 0000:00:07.1
> VP_IDE: chipset revision 16
> VP_IDE: not 100% native mode: will probe irqs later
> ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
> VP_IDE: VIA vt82c686a (rev 22) IDE UDMA66 controller on pci0000:00:07.1
> ide0: BM-DMA at 0xc000-0xc007, BIOS settings: hda:DMA, hdb:DMA
> ide1: BM-DMA at 0xc008-0xc00f, BIOS settings: hdc:pio, hdd:DMA
> hda: WDC WD205BA, ATA DISK drive
> anticipatory scheduling elevator
> ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> hdd: OnStream DI-30, ATAPI TAPE drive
>
>
> Thanks in advance for any tips on a solution for this problem.
>
> Stef

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:46    [W:0.024 / U:0.088 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site