Messages in this thread | ![/](/images/icornerl.gif) | | Subject | [More Info] Re: 2.6.0test 1 fails on eth0 up (arjanv RPM's - all needed rpms installed) | From | "Trever L. Adams" <> | Date | 15 Jul 2003 16:10:38 -0400 |
| |
Ok, I finally went into interactive boot (taking a moment from my studies). I made sure not to let it bring eth0 up, everything worked fine. I still got this USB oops. I hope it means something more to people.
If I do pci=noacpi and acpi=off then I can boot. However, I can't use my mouse with is an MS InteliMouse Explorer 3 on a PS/2 port. The PS/2 driver did initiate, so did gpm. However, no mouse in console or X. This board is supposed to be fine with Linux acpi, or so I have read somewhere. Anyway, USB oops.
kernel: ehci_hcd 0000:00:02.2: PCI device 10de:0068 (nVidia Corporation) kernel: irq 3: nobody cared! kernel: Call Trace: kernel: [<c010c12a>] __report_bad_irq+0x2a/0x90 kernel: [<c010c21c>] note_interrupt+0x6c/0xb0 kernel: [<c010c42d>] do_IRQ+0xed/0x110 kernel: [<c010a9f8>] common_interrupt+0x18/0x20 kernel: [<c011f700>] do_softirq+0x40/0xa0 kernel: [<c010c414>] do_IRQ+0xd4/0x110 kernel: [<c010a9f8>] common_interrupt+0x18/0x20 kernel: [<c010c84e>] setup_irq+0x6e/0xb0 kernel: [<e087e310>] usb_hcd_irq+0x0/0x60 [usbcore] kernel: [<c010c4d0>] request_irq+0x80/0xd0 kernel: [<e08813f6>] usb_hcd_pci_probe+0x1d6/0x440 [usbcore] kernel: [<e087e310>] usb_hcd_irq+0x0/0x60 [usbcore] kernel: [<c0180033>] t_start+0x43/0x50 kernel: [<c01a92f2>] pci_device_probe_static+0x52/0x70 kernel: [<c01a940c>] __pci_device_probe+0x3c/0x50 kernel: [<c01a944f>] pci_device_probe+0x2f/0x50 kernel: [<c01ea715>] bus_match+0x45/0x80 kernel: [<c01ea82c>] driver_attach+0x5c/0x60 kernel: [<c01eab17>] bus_add_driver+0xa7/0xc0 kernel: [<c01eaf9f>] driver_register+0x2f/0x40 kernel: [<c01a9700>] pci_register_driver+0x70/0xa0 kernel: [<e0824021>] init+0x21/0x4f [ehci_hcd] kernel: [<c01303bb>] sys_init_module+0x10b/0x1e0 kernel: [<c010a839>] sysenter_past_esp+0x52/0x71 kernel: handlers: kernel: [<e087e310>] (usb_hcd_irq+0x0/0x60 [usbcore]) kernel: Disabling IRQ #3 kernel: ehci_hcd 0000:00:02.2: irq 3, pci mem e0815000 kernel: ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1 -- "History is nothing but a collection of fables and useless trifles, cluttered up with a mass of unnecessary figures and proper names." -- Leo Tolstoy
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| ![\](/images/icornerr.gif) |