Messages in this thread Patch in this message | | | Date | Sat, 14 Jun 2003 22:07:44 +0200 | From | Sam Ravnborg <> | Subject | Re: SH Port - Makefile |
| |
On Sat, Jun 14, 2003 at 02:45:12PM -0500, Paul Mundt wrote: > Okay, the main reason why I needed to do this was so that a make clean > would get the proper directory path. The problem was that machdir-y > wasn't getting the board name correctly since at make clean time the > CONFIG_SH_xxx names weren't being resolved.
The following should do the trick. I also rearranged a few things.
Whith respect to removing the framepointer from CFLAGS. There is already a CONFIG option for that CONFIG_FRAME_POINTER. It would be much cleaner using that one in combination with CONFIG_SH_KGDB
Sam
===== arch/sh/Makefile 1.16 vs edited ===== --- 1.16/arch/sh/Makefile Sat Jun 14 14:30:11 2003 +++ edited/arch/sh/Makefile Sat Jun 14 22:03:10 2003 @@ -14,17 +14,6 @@ # this architecture # -# -# We don't necessarily agree with the top-level Makefile with regards to what -# does and does not qualify as a noconfig_targets rule. In this case, we're -# still dependant on .config settings in order for core-y (machdir-y in -# particular) to resolve the proper directory. So we just manually include it -# if it hasn't been already.. -# -ifndef include_config --include .config -endif - cpu-y := -mb cpu-$(CONFIG_CPU_LITTLE_ENDIAN) := -ml @@ -66,24 +55,24 @@ core-y += arch/sh/kernel/ arch/sh/mm/ # Boards -machdir-$(CONFIG_SH_SOLUTION_ENGINE) := se/770x -machdir-$(CONFIG_SH_7751_SOLUTION_ENGINE) := se/7751 -machdir-$(CONFIG_SH_STB1_HARP) := harp -machdir-$(CONFIG_SH_STB1_OVERDRIVE) := overdrive -machdir-$(CONFIG_SH_HP620) := hp6xx/hp620 -machdir-$(CONFIG_SH_HP680) := hp6xx/hp680 -machdir-$(CONFIG_SH_HP690) := hp6xx/hp690 -machdir-$(CONFIG_SH_CQREEK) := cqreek -machdir-$(CONFIG_SH_DMIDA) := dmida -machdir-$(CONFIG_SH_EC3104) := ec3104 -machdir-$(CONFIG_SH_SATURN) := saturn -machdir-$(CONFIG_SH_DREAMCAST) := dreamcast -machdir-$(CONFIG_SH_CAT68701) := cat68701 -machdir-$(CONFIG_SH_BIGSUR) := bigsur -machdir-$(CONFIG_SH_SH2000) := sh2000 -machdir-$(CONFIG_SH_ADX) := adx -machdir-$(CONFIG_SH_MPC1211) := mpc1211 -machdir-$(CONFIG_SH_UNKNOWN) := unknown +machdir-$(CONFIG_SH_SOLUTION_ENGINE) := se/770x/ +machdir-$(CONFIG_SH_7751_SOLUTION_ENGINE) := se/7751/ +machdir-$(CONFIG_SH_STB1_HARP) := harp/ +machdir-$(CONFIG_SH_STB1_OVERDRIVE) := overdrive/ +machdir-$(CONFIG_SH_HP620) := hp6xx/hp620/ +machdir-$(CONFIG_SH_HP680) := hp6xx/hp680/ +machdir-$(CONFIG_SH_HP690) := hp6xx/hp690/ +machdir-$(CONFIG_SH_CQREEK) := cqreek/ +machdir-$(CONFIG_SH_DMIDA) := dmida/ +machdir-$(CONFIG_SH_EC3104) := ec3104/ +machdir-$(CONFIG_SH_SATURN) := saturn/ +machdir-$(CONFIG_SH_DREAMCAST) := dreamcast/ +machdir-$(CONFIG_SH_CAT68701) := cat68701/ +machdir-$(CONFIG_SH_BIGSUR) := bigsur/ +machdir-$(CONFIG_SH_SH2000) := sh2000/ +machdir-$(CONFIG_SH_ADX) := adx/ +machdir-$(CONFIG_SH_MPC1211) := mpc1211/ +machdir-$(CONFIG_SH_UNKNOWN) := unknown/ incdir-y := $(machdir-y) @@ -91,7 +80,7 @@ incdir-$(CONFIG_SH_7751_SOLUTION_ENGINE) := se7751 incdir-$(CONFIG_SH_HP600) := hp6xx -core-y += arch/sh/boards/$(machdir-y)/ +core-y += arch/sh/boards/$(machdir-y) # Companion chips core-$(CONFIG_HD64461) += arch/sh/cchips/hd6446x/hd64461/ @@ -103,7 +92,6 @@ libs-y += arch/sh/lib/ $(LIBGCC) -boot := arch/sh/boot AFLAGS_vmlinux.lds.o := -traditional @@ -119,11 +107,10 @@ $(Q)$(MAKE) $(build)=arch/sh/tools include/asm-sh/machtypes.h -BOOTIMAGE=arch/sh/boot/zImage -zImage: vmlinux - $(Q)$(MAKE) $(build)=$(boot) $(BOOTIMAGE) +boot := arch/sh/boot -compressed: zImage +zImage: vmlinux + $(Q)$(MAKE) $(build)=$(boot) arch/sh/boot/zImage archclean: $(Q)$(MAKE) $(clean)=$(boot) - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |