Messages in this thread | ![/](/images/icornerl.gif) | | Date | Fri, 30 May 2003 12:11:08 +0200 | From | Stephan von Krawczynski <> | Subject | Re: 21rc6 serverworks IDE blows even more than is usual :) |
| |
On Thu, 29 May 2003 13:40:01 +0200 Tomas Szepe <szepe@pinerecords.com> wrote:
> Hi Alan, Bartolomiej, Marcelo, > > I can't seem to get the onboard Serverworks CSB5 IDE controller (rev 93) > in a Compaq Proliant ML350 G3 to work (reliably/at all) no matter what > kernel I use: > > o 2.4.21-rc6 > intrerrupt timeouts, can't r/w from/to drive reliably in pio, dma hosed > > o 2.4.21-rc2-ac3 > r/w in pio ok, dma hosed > > o 2.4.20 > intrerrupt timeouts, can't r/w from/to drive reliably in pio, dma hosed > > o 2.4.20-pre8-ac3 (has always worked on OSB4 beasts for me) > intrerrupt timeouts, can't r/w from/to drive reliably in pio, dma hosed > > lspci & .config excerpts plus other bits of info follow. > The box is SMP + highmem. > > -- > > 00:0f.1 IDE interface: ServerWorks CSB5 IDE Controller (rev 93) (prog-if 8a > [Master SecP PriP]) > Subsystem: ServerWorks CSB5 IDE Controller > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ > Stepping- SERR+ FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- > DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 > Region 0: I/O ports at <ignored> > Region 1: I/O ports at <ignored> > Region 2: I/O ports at <unassigned> > Region 3: I/O ports at <unassigned> > Region 4: I/O ports at 2000 [size=16]
I don't know if this is in anyway interesting for you, but I got the same chipset on an Asus board and been burning GBs of data onto DVDs with it and no (ide) problem.
Mine:
00:0f.1 IDE interface: ServerWorks CSB5 IDE Controller (rev 93) (prog-if 8a [Master SecP PriP]) Subsystem: ServerWorks CSB5 IDE Controller Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64, cache line size 08 Region 0: I/O ports at <ignored> Region 1: I/O ports at <ignored> Region 2: I/O ports at <ignored> Region 3: I/O ports at <ignored> Region 4: I/O ports at 9400 [size=16]
/dev/hdc:
Model=SONY DVD RW DRU-500A, FwRev=2.0c, SerialNo=XXXXXXXX Config={ Fixed Removeable DTR<=5Mbs DTR>10Mbs nonMagnetic } RawCHS=0/0/0, TrkSize=0, SectSize=0, ECCbytes=0 BuffType=unknown, BuffSize=0kB, MaxMultSect=0 (maybe): CurCHS=0/0/0, CurSects=0, LBA=yes, LBAsects=0 IORDY=on/off, tPIO={min:180,w/IORDY:120}, tDMA={min:120,rec:120} PIO modes: pio0 pio1 pio2 pio3 pio4 DMA modes: mdma0 mdma1 mdma2 UDMA modes: udma0 udma1 *udma2 AdvancedPM=no Drive conforms to: device does not report version: 4 5 6
Regards, Stephan
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| ![\](/images/icornerr.gif) |