Messages in this thread | ![/](/images/icornerl.gif) | | Date | Fri, 30 May 2003 06:09:02 -0400 (EDT) | From | Kevin Jacobs <> | Subject | Re: Ext3 meta-data performance |
| |
On Thu, 29 May 2003, Nick Piggin wrote: > Kevin Jacobs wrote: > >[...] > >Since these rsync backups are done in addition to traditional daily tape > >backups, we've taken the system out of production use and opened the door > >for experimentation. So, the next logical step was to try a 2.5 kernel. > >After some work, I've gotten 2.5.70-mm2 booting and it is _much_ better than > >the Redhat 2.4 kernels, and the system interactivity is flawless. However, > >the speed of creating hard-links is still three and a half times slower than > >with the old 2.2 kernel. It now takes ~14 minutes to create the links, and > >from what I can tell, the bottlenecks is not the CPU or the disk-throughput. > > > Its probably seek bound. > Provide some more information about your disk/partition setup, and external > journals, and data= mode. Remember ext3 will generally always have to do > more work than ext2.
SCSI ID 1 3ware 7500-8 ATA RAID Controller
* Array Unit 0 Mirror (RAID 1) 40.01 GB OK + Port 0 WDC WD400BB-00DEA0 40.02 GB OK + Port 1 WDC WD400BB-00DEA0 40.02 GB OK * Array Unit 4 Striped with Parity 64K (RAID 5) 555.84 GB OK + Port 4 IC35L180AVV207-1 185.28 GB OK + Port 5 IC35L180AVV207-1 185.28 GB OK + Port 6 IC35L180AVV207-1 185.28 GB OK + Port 7 IC35L180AVV207-1 185.28 GB OK
Disk /dev/sda: 40.0 GB, 40019615744 bytes 255 heads, 63 sectors/track, 4865 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System /dev/sda1 * 1 261 2096451 83 Linux /dev/sda2 262 1566 10482412+ 83 Linux /dev/sda3 1567 4570 24129630 83 Linux /dev/sda4 4571 4865 2369587+ f Win95 Ext'd (LBA) /dev/sda5 4571 4589 152586 83 Linux /dev/sda6 4590 4734 1164681 83 Linux /dev/sda7 4735 4865 1052226 83 Linux
Disk /dev/sdb: 555.8 GB, 555847581696 bytes 255 heads, 63 sectors/track, 67577 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System /dev/sdb1 * 1 67577 542812221 83 Linux
Unit 0 is /dev/sda and the journal is /dev/sda5. Unit 1 is /dev/sdb and the backup filesystem is /dev/sdb1. The data= mode is whatever is default, /dev/sdb1 is mounted noatime. I've also applied the journal_refile_buffer patch posted by AKPM yesterday morning.
> If you want to play with the scheduler, try set > /sys/block/blockdev*/queue/nr_requests = 8192
This killed the entire system -- livelocking it with no disk activity to the point that I had to hit the reset button. So does setting nr_requests on sda and sdb from 128 to 256. The problems hit before the rsync, during a 'rm -Rf' on a previously copied tree.
> then try > /sys/block/blockdev*/queue/iosched/antic_expire = 0
This seemed to make no difference.
> Try the above combinations with and without a big TCQ depth. You should > be able to set them on the fly and see what happens to throughput during > the operation. Let me know what you see.
I'm not sure how to change TCQ depth on the fly. Last I knew, it was a compiled-in parameter.
I have some more time to experiment, so please let me know if there is anything else you think I should try.
Thanks, -Kevin
-- -- Kevin Jacobs The OPAL Group - Enterprise Systems Architect Voice: (216) 986-0710 x 19 E-mail: jacobs@theopalgroup.com Fax: (216) 986-0714 WWW: http://www.theopalgroup.com
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| ![\](/images/icornerr.gif) |