lkml.org 
[lkml]   [2003]   [May]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [RFR] a new SCSI driver
Jeff Garzik wrote:
>
<snip>

> * Only supports Intel PATA and SATA right now

Jeff,
Your patch applies to lk 2.5.70 without problems.

I found that my dual Celeron (abit mobo) has this
Intel IDE controller:
00:07.1 IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 01)

so I tried a 2.5.70 kernel with this patch. Two disks
connected:
- SCSI disk to a Tekram 390u3w controller (sym53c8xx_2
driver). Root partition on this disk
- a Maxtor ATA disk (D740X-6L) to the Intel IDE
controller.

Didn't get too far. After finding the SCSI controller and
SCSI disk at boot up, this came out just before it locked up:
ata1:PATA max UDMA/33 cmd 0x1F0 ctl 0x3F6 bmdma 0xF000 irq 14

So I disabled the IDE controllers in the BIOS and then
this came out:
....
PCI: Enabling device 00:07.1 (0000->0001)
ata1:PATA max UDMA/33 cmd 0x1F0 ctl 0x3F6 bmdma 0xF000 irq 14
ATA: abnormal status 0xFF on port 0x1F7
ATA: abnormal status 0xFF on port 0x1F7

and it locked up again.

Doug Gilbert

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:35    [W:0.062 / U:0.372 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site