lkml.org 
[lkml]   [2003]   [May]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: Realtek 8139c - kernel 2.4.21-rc3
	Gutko,

Gutko wrote:
> Just compiled this kernel with 8139too as module. I have adsl (pppoe)
> connection. Problem is, connection is lost after about 2-5 minutes after
> start.
> I tested eth card with ftp://ftp.scyld.com/pub/diag/rtl8139-diag.c
> and found something like this "configured with ABNORMAL settings".Or

Were you forcing full-duplex or 100mbps?

> something like this. So I downloaded driver (v1.01)from www.realtek.com.tw,
> replaced 8139too module and now all semms to be ok.

AFAIK, the driver from www.realtek.com.tw *is* 8139too.

> This diag tool says now : "configured with normal settings"

Yep, it doesn't seem to be a driver problem, but forcing a buggy
configuration to the driver.

What probably happened is that when you downloaded the driver from
the Realtek website, the modules.conf part of this "new" driver (or
some other script you might be using to load it) isn't forcing any
options and letting the driver figure out the best configuration.

Kind Regards,

Felipe

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:35    [W:0.020 / U:2.488 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site