lkml.org 
[lkml]   [2003]   [May]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: Questions about LARGE, RAID storage under Linux
On Tue, May 20, 2003 at 12:15:39PM -0400, Michael S. Peek wrote:
> I am looking at using a hardware RAID device that appears to it's SCSI host as
> a single large drive. I am well aware that I can break this device down into
> multiple LUNS, but if possible I need to keep it as one big drive. I
> understand from the Linux Info Sheet, last updated in 1998 according to it's
> text, that Linux is able to handle partitions up to 4TB in size.

What is the Linux Info Sheet?

AFAIK linux has never had a partition-limit of 4 TB.
There is a limit in any block-device of 2^32 sectors, typically 2 TB.
Some drivers may have sign-issues, leaving you with only 2^31 sectors (1
TB).


> What I want to know is:
>
> (a) Is 4TB still the maximum limitation on a single partition size? If not,
> what is the current maximum?
>
> (b) Would this maximum partition size still apply when using the software RAID
> tools to combine two or more of these devices together?

I believe the 2.4 kernel is still limited to 2 TB for both scsi-devices
and virtual block-devices such as md or lvm.

I think 2.5 has an option added for large block devices. This should
allow you to use both scsi-devices and md virtual devices larger than
2TB. It may depend on changes in the actual scsi-drivers, so possible it
only works for a subset of scsi-adapters. Last time I checked it didn't
enable larger LVM-volumes, so you're limited to md for virtual devices.

> What I am looking for is the ability to mount and format an external SCSI
> device that's 3.5TB in size. (It's a Promise UltraTrak RM1500 w/ 15 x 250GB
> drives). I want to be able to upgrade the hard drives at a later date and
> know that the Linux box to which it is attached will still be able to handle
> them. Ideally, I would like to purchase a second (or even a third) device
> later down the road and use software RAID to concatenate them together.

I think you would want to use LVM to concatenate them together, and
AFAIK that is not yet possible. There is work in progress though.

I think your best chances of making this work in the future without
having to reformat your system is to use LVM2 with a large physical
extentsize from the start.


My information may be out of date, so take this with a grain of salt.


--
Ragnar Kjørstad
Zet.no
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:35    [W:0.023 / U:1.592 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site