Messages in this thread | ![/](/images/icornerl.gif) | | Date | Sun, 6 Apr 2003 12:20:42 +0200 (CEST) | From | Stephan van Hienen <> | Subject | Re: onboard ICH4 seen as ICH3 (ultra100 controller onboard) (2.4.20/2.4.21-pre7) |
| |
On Sat, 5 Apr 2003, Andre Hedrick wrote:
> > Looking back over the thread, you have a failed cable detect. > I do not know why, but pat ide0=ata66 and ide1=ata66 to see if that is a > temp work-around. ok this works (but ide0=ata100/ide1=at100 doesn't work)
hda: 351651888 sectors (180046 MB) w/2048KiB Cache, CHS=21889/255/63, UDMA(100) blk: queue c03ddf68, I/O limit 4095Mb (mask 0xffffffff) hdc: 351651888 sectors (180046 MB) w/2048KiB Cache, CHS=21889/255/63, UDMA(100) blk: queue c03de2cc, I/O limit 4095Mb (mask 0xffffffff)
]$ cat /proc/ide/piix
Intel PIIX4 Ultra 100 Chipset. --------------- Primary Channel ---------------- Secondary Channel ------------- enabled enabled --------------- drive0 --------- drive1 -------- drive0 ---------- drive1 ------ DMA enabled: yes no yes no UDMA enabled: yes no yes no UDMA enabled: 3 X 3 X UDMA DMA PIO
]# hdparm -X69 /dev/hda
/dev/hda: setting xfermode to 69 (UltraDMA mode5)
]# hdparm -X69 /dev/hdc
/dev/hdc: setting xfermode to 69 (UltraDMA mode5)
]# cat /proc/ide/piix
Intel PIIX4 Ultra 100 Chipset. --------------- Primary Channel ---------------- Secondary Channel ------------- enabled enabled --------------- drive0 --------- drive1 -------- drive0 ---------- drive1 ------ DMA enabled: yes no yes no UDMA enabled: yes no yes no UDMA enabled: 5 X 5 X UDMA DMA PIO
> > You said nothing selected? > > Does that mean your bios is set to [none] for all devices? > If so change it to [auto], [none] tends to do strange things.
then i get get the 'lba48 problem', my bios doesn't support lba48 - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| ![\](/images/icornerr.gif) |