Messages in this thread | | | Date | Sat, 8 Mar 2003 20:35:08 +0100 | From | Anders Widman <> | Subject | Re: 2.4.x IDE: Statis=0x58 - Drive not ready for command |
| |
> On Sat, Mar 08, 2003 at 05:54:47PM +0100, Anders Widman wrote: >> >> I get lots of errors like these: >> >> kernel: PDC202XX: Secondary channel reset. >> kernel: hdh: drive not ready for command >> kernel: ide3: reset: success >> kernel: hdf: status error: status=0x58 { DriveReady SeekComplete DataRequest } >> kernel: hdf: drive not ready for command >> kernel: hdh: status error: status=0x58 { DriveReady SeekComplete DataRequest } >> kernel: hdh: drive not ready for command >> kernel: hdh: status timeout: status=0xd0 { Busy } >> kernel: PDC202XX: Secondary channel reset. >> kernel: hdh: drive not ready for command >> kernel: ide3: reset: success >> >> * Running virtually every kernel since 2.4.17-2.4-21-x. >> * All harddrives UDMA100. >> * Tried with DMA and unmask IRQ off. >> * Tried with and without ACPI, APIC and APM. >> * Happens to all harddrives. >> * Cabling, power, hardware and drives thorowly checked and replaced >> for testing. >> * Tested with one VIA KT266a motherboard and two Intel 440BX >> * SMART values good. >> * To all my testing I have not found any problems with the hardware. >> * When to many of these IDE error occur the system freezes. >> * Errors occur with the internal controller as well as the two Promise >> PDC20268 (U100 Tx2) controllers. >> >> What should I do to fix this? I do not want to run Windows as I need >> LVM to manage the diskspace. Windows does however run very stable. >> >> Any tips or ideas are welcome!
> On errors you posted there are hdf & hdh. Do not you use slave-only > configurations? You must not use slave-only with Promise. Never. > Petr
Nope. I use 4 drives on both cards.
-------- PGP public key: https://tnonline.net/secure/pgp_key.txt
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |