Messages in this thread | | | Date | Thu, 27 Mar 2003 09:52:02 +0800 | From | Brad Campbell <> | Subject | Re: IDE problem in 2.4.21-pre1 --> pre6 |
| |
Brad Campbell wrote: > G'day all, > > Just upgraded a system I am developing from 2.4.20 to 2.4.21-preX and > noticed this 20 second hang with ide on bootup. > Problem still exists in -pre6 (released about an hour before my previous E-mail) I also tried ide0=reset to reset the ide bus in case the 2.4.19 kernel had left it in some strange state. Tried with the VIA driver compiled in also.. No joy..
Included hdparm -i /dev/hda ; hdparm -I /dev/hda and /proc/pci below.
/home/service # hdparm -i /dev/hda
/dev/hda:
Model=APACER_CF_32MB, FwRev=verB.65, SerialNo=02-86912507 Config={ HardSect NotMFM Removeable DTR>10Mbs nonMagnetic } RawCHS=123/16/32, TrkSize=16384, SectSize=512, ECCbytes=4 BuffType=DualPort, BuffSize=1kB, MaxMultSect=1, MultSect=off CurCHS=123/16/32, CurSects=62976, LBA=yes, LBAsects=62976 IORDY=no PIO modes: pio0 pio1 pio2 AdvancedPM=no
/home/service # hdparm -I /dev/hda
/dev/hda:
CompactFlash ATA device, with removable media Model Number: APACER_CF_32MB Serial Number: 02-86912507 Firmware Revision: verB.65 Standards: Likely used: 4 Configuration: Logical max current cylinders 123 123 heads 16 16 sectors/track 32 32 -- bytes/track: 16384 bytes/sector: 512 CHS current addressable sectors: 62976 LBA user addressable sectors: 62976 device size with M = 1024*1024: 30 MBytes device size with M = 1000*1000: 32 MBytes Capabilities: LBA, IORDY(may be)(cannot be disabled) Buffer size: 1.0kB bytes avail on r/w long: 4 Queue depth: 1 Standby timer values: spec'd by Vendor R/W multiple sector transfer: Max = 1 Current = 0 DMA: not supported PIO: pio0 pio1 pio2
/home/service # cat /proc/pci
PCI devices found: Bus 0, device 0, function 0: Host bridge: VIA Technologies, Inc. VT8601 [Apollo ProMedia] (rev 5). Master Capable. Latency=8. Prefetchable 32 bit memory at 0xd0000000 [0xdfffffff]. Bus 0, device 1, function 0: PCI bridge: VIA Technologies, Inc. VT8601 [Apollo ProMedia AGP] (rev 0). Master Capable. No bursts. Min Gnt=12. Bus 0, device 17, function 0: ISA bridge: VIA Technologies, Inc. VT8231 [PCI-to-ISA Bridge] (rev 16). Bus 0, device 17, function 1: IDE interface: VIA Technologies, Inc. VT82C586B PIPC Bus Master IDE (rev 6). Master Capable. Latency=32. I/O at 0xd000 [0xd00f]. Bus 0, device 17, function 2: USB Controller: VIA Technologies, Inc. USB (rev 30). IRQ 3. Master Capable. Latency=32. I/O at 0xd400 [0xd41f]. Bus 0, device 17, function 3: USB Controller: VIA Technologies, Inc. USB (#2) (rev 30). IRQ 3. Master Capable. Latency=32. I/O at 0xd800 [0xd81f]. Bus 0, device 17, function 4: Bridge: VIA Technologies, Inc. VT8235 ACPI (rev 16). Bus 0, device 17, function 5: Multimedia audio controller: VIA Technologies, Inc. VT82C686 AC97 Audio Controller (rev 64). IRQ 10. I/O at 0xdc00 [0xdcff]. I/O at 0xe000 [0xe003]. I/O at 0xe400 [0xe403]. Bus 0, device 18, function 0: Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 81). IRQ 11. Master Capable. Latency=32. Min Gnt=3.Max Lat=8. I/O at 0xe800 [0xe8ff]. Non-prefetchable 32 bit memory at 0xe3000000 [0xe30000ff]. Bus 0, device 20, function 0: Serial controller: Timedia Technology Co Ltd PCI2S550 (Dual 16550 UART) (rev 1). IRQ 5. I/O at 0xec00 [0xec1f]. Bus 1, device 0, function 0: VGA compatible controller: Trident Microsystems CyberBlade/i1 (rev 106). IRQ 11. Master Capable. Latency=32. Non-prefetchable 32 bit memory at 0xe1800000 [0xe1ffffff]. Non-prefetchable 32 bit memory at 0xe2000000 [0xe201ffff]. Non-prefetchable 32 bit memory at 0xe1000000 [0xe17fffff].
-- Brad.... /"\ \ / ASCII RIBBON CAMPAIGN X AGAINST HTML MAIL / \
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |