lkml.org 
[lkml]   [2003]   [Dec]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: 2.6-test11 framebuffer Matrox
Hello Steffen,

> My Matrox-framebuffer is not working properly. Build direct into the
> kernel, the monitor will be black with some stripes at startup, just the
> reset button works.
> Build as a modules, the same happens if I load the module.

Hmm, I just tested with the 2.6.0 release and my both cards are working
properly now. The only thing is a huge white box around the penguin logo.

Here is "lspci -v" of the cards I tested:

00:0a.0 VGA compatible controller: Matrox Graphics, Inc. MGA G200 (rev
01) (prog-if 00 [VGA])
Subsystem: Matrox Graphics, Inc. Millennium G200 SD
Flags: bus master, medium devsel, latency 64, IRQ 11
Memory at dd000000 (32-bit, prefetchable) [size=16M]
Memory at dfffc000 (32-bit, non-prefetchable) [size=16K]
Memory at df000000 (32-bit, non-prefetchable) [size=8M]
Expansion ROM at dffe0000 [disabled] [size=64K]
Capabilities: [dc] Power Management version 1

01:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA G400 AGP
(rev 03) (prog-if 00 [VGA])
Subsystem: Giga-byte Technology GA-G400
Flags: bus master, medium devsel, latency 64, IRQ 11
Memory at dc000000 (32-bit, prefetchable) [size=32M]
Memory at dfafc000 (32-bit, non-prefetchable) [size=16K]
Memory at df000000 (32-bit, non-prefetchable) [size=8M]
Expansion ROM at dfae0000 [disabled] [size=64K]
Capabilities: [dc] Power Management version 2
Capabilities: [f0] AGP version 2.0

> Steffen

CU
Michael.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:59    [W:2.198 / U:0.380 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site