lkml.org 
[lkml]   [2003]   [Nov]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    Date
    From
    Subject[kernel panic @ reboot] 2.6.0-test10-mm1
    Hi,

    I get a kernel panic each time I'm rebooting my system on all
    recent 2.6.0testx kernels (cpu is an Athlon 1800XP, kernel compiled with
    preempt and ACPI ; config and dmesg is attached).

    This time, I got tired of seeing this and finally installed kmsgdump
    in order to collect some data, available in messages.txt (*)

    For my particular case, X was not loaded: I just logged in in console
    mode and did a reboot. No nvidia or other binary driver loaded. Any hint
    on tracking down this bug is appreciated (I can compile my kernel with
    additional debugging options if required).

    Regards,

    Vincent

    (*) BTW: something like kmsgdump should really one day be included in
    mainline kernels, serial console is often not an option for people like
    me running a single machine ; writting an oops by hand is not fun... and
    often, even if the crash does not occur while running an X server, the
    beginning of the oops is not accessible on the console any more...
    rovided physical RAM map:
    BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
    BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
    BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
    BIOS-e820: 0000000000100000 - 000000000fff0000 (usable)
    BIOS-e820: 000000000fff0000 - 000000000fff3000 (ACPI NVS)
    BIOS-e820: 000000000fff3000 - 0000000010000000 (ACPI data)
    BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
    BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
    BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
    255MB LOWMEM available.
    found SMP MP-table at 000f4d30
    hm, page 000f4000 reserved twice.
    hm, page 000f5000 reserved twice.
    hm, page 000f0000 reserved twice.
    hm, page 000f1000 reserved twice.
    On node 0 totalpages: 65520
    DMA zone: 4096 pages, LIFO batch:1
    Normal zone: 61424 pages, LIFO batch:14
    HighMem zone: 0 pages, LIFO batch:1
    DMI 2.3 present.
    ACPI: RSDP (v000 GBT ) @ 0x000f66a0
    ACPI: RSDT (v001 GBT AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x0fff3000
    ACPI: FADT (v001 GBT AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x0fff3040
    ACPI: MADT (v001 GBT AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x0fff6cc0
    ACPI: DSDT (v001 GBT AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000
    ACPI: Local APIC address 0xfee00000
    ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    Processor #0 6:6 APIC version 16
    ACPI: LAPIC_NMI (acpi_id[0x00] polarity[0x0] trigger[0x0] lint[0x1])
    ACPI: IOAPIC (id[0x02] address[0xfec00000] global_irq_base[0x0])
    IOAPIC[0]: Assigned apic_id 2
    IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, IRQ 0-23
    ACPI: INT_SRC_OVR (bus[0] irq[0x0] global_irq[0x2] polarity[0x0] trigger[0x0])
    ACPI: INT_SRC_OVR (bus[0] irq[0x9] global_irq[0x9] polarity[0x3] trigger[0x3])
    Enabling APIC mode: Flat. Using 1 I/O APICs
    Using ACPI (MADT) for SMP configuration information
    Building zonelist for node : 0
    Kernel command line: root=/dev/hda1
    current: c02eea60
    current->thread_info: c0356000
    Initializing CPU#0
    PID hash table entries: 1024 (order 10: 8192 bytes)
    Detected 1540.938 MHz processor.
    Using tsc for high-res timesource
    Console: colour VGA+ 80x25
    Memory: 256044k/262080k available (1701k kernel code, 5308k reserved, 689k data, 132k init, 0k highmem)
    zapping low mappings.
    Calibrating delay loop... 3031.04 BogoMIPS
    Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
    Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
    Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
    CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000
    CPU: After vendor identify, caps: 0383fbff c1c3fbff 00000000 00000000
    CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
    CPU: L2 Cache: 256K (64 bytes/line)
    CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000020
    Intel machine check architecture supported.
    Intel machine check reporting enabled on CPU#0.
    CPU: AMD Athlon(tm) XP 1800+ stepping 02
    Enabling fast FPU save and restore... done.
    Enabling unmasked SIMD FPU exception support... done.
    Checking 'hlt' instruction... OK.
    POSIX conformance testing by UNIFIX
    enabled ExtINT on CPU#0
    ESR value before enabling vector: 00000000
    ESR value after enabling vector: 00000000
    ENABLING IO-APIC IRQs
    init IO_APIC IRQs
    IO-APIC (apicid-pin) 2-0, 2-16, 2-17, 2-18, 2-19, 2-20, 2-21, 2-22, 2-23 not connected.
    ..TIMER: vector=0x31 pin1=2 pin2=-1
    Using local APIC timer interrupts.
    calibrating APIC timer ...
    ..... CPU clock speed is 1540.0195 MHz.
    ..... host bus clock speed is 267.0860 MHz.
    NET: Registered protocol family 16
    PCI: PCI BIOS revision 2.10 entry at 0xfa000, last bus=1
    PCI: Using configuration type 1
    mtrr: v2.0 (20020519)
    ACPI: Subsystem revision 20031002
    IOAPIC[0]: Set PCI routing entry (2-9 -> 0x71 -> IRQ 9 Mode:1 Active:1)
    ACPI: Interpreter enabled
    ACPI: Using IOAPIC for interrupt routing
    ACPI: PCI Root Bridge [PCI0] (00:00)
    PCI: Probing PCI hardware (bus 00)
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 *7 10 11 12 14 15)
    ACPI: PCI Interrupt Link [LNKB] (IRQs 1 *3 4 5 6 7 10 11 12 14 15)
    ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 11 12 14 15)
    ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
    ACPI: PCI Interrupt Link [ALKA] (IRQs 20)
    ACPI: PCI Interrupt Link [ALKB] (IRQs 21)
    ACPI: PCI Interrupt Link [ALKC] (IRQs 22)
    ACPI: PCI Interrupt Link [ALKD] (IRQs 23)
    Linux Plug and Play Support v0.97 (c) Adam Belay
    PnPBIOS: Scanning system for PnP BIOS support...
    PnPBIOS: Found PnP BIOS installation structure at 0xc00faa60
    PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xaa90, dseg 0xf0000
    PnPBIOS: 14 nodes reported by PnP BIOS; 14 recorded by driver
    IOAPIC[0]: Set PCI routing entry (2-17 -> 0xa9 -> IRQ 17 Mode:1 Active:1)
    00:00:09[A] -> 2-17 -> IRQ 17
    IOAPIC[0]: Set PCI routing entry (2-18 -> 0xb1 -> IRQ 18 Mode:1 Active:1)
    00:00:09[B] -> 2-18 -> IRQ 18
    IOAPIC[0]: Set PCI routing entry (2-19 -> 0xb9 -> IRQ 19 Mode:1 Active:1)
    00:00:09[C] -> 2-19 -> IRQ 19
    IOAPIC[0]: Set PCI routing entry (2-16 -> 0xc1 -> IRQ 16 Mode:1 Active:1)
    00:00:09[D] -> 2-16 -> IRQ 16
    Pin 2-18 already programmed
    Pin 2-19 already programmed
    Pin 2-16 already programmed
    Pin 2-17 already programmed
    Pin 2-19 already programmed
    Pin 2-16 already programmed
    Pin 2-17 already programmed
    Pin 2-18 already programmed
    Pin 2-16 already programmed
    Pin 2-17 already programmed
    Pin 2-18 already programmed
    Pin 2-19 already programmed
    Pin 2-17 already programmed
    Pin 2-18 already programmed
    Pin 2-19 already programmed
    Pin 2-16 already programmed
    Pin 2-19 already programmed
    Pin 2-16 already programmed
    Pin 2-17 already programmed
    Pin 2-18 already programmed
    Pin 2-16 already programmed
    Pin 2-17 already programmed
    Pin 2-18 already programmed
    Pin 2-19 already programmed
    Pin 2-18 already programmed
    Pin 2-19 already programmed
    Pin 2-16 already programmed
    Pin 2-17 already programmed
    Pin 2-17 already programmed
    Pin 2-18 already programmed
    Pin 2-19 already programmed
    Pin 2-16 already programmed
    _CRS returns NULL! Using IRQ 21 for device (PCI Interrupt Link [ALKB]).
    ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 21
    IOAPIC[0]: Set PCI routing entry (2-21 -> 0xc9 -> IRQ 21 Mode:1 Active:1)
    00:00:10[A] -> 2-21 -> IRQ 21
    Pin 2-21 already programmed
    Pin 2-21 already programmed
    Pin 2-21 already programmed
    _CRS returns NULL! Using IRQ 20 for device (PCI Interrupt Link [ALKA]).
    ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20
    IOAPIC[0]: Set PCI routing entry (2-20 -> 0xd1 -> IRQ 20 Mode:1 Active:1)
    00:00:11[A] -> 2-20 -> IRQ 20
    Pin 2-21 already programmed
    _CRS returns NULL! Using IRQ 22 for device (PCI Interrupt Link [ALKC]).
    ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22
    IOAPIC[0]: Set PCI routing entry (2-22 -> 0xd9 -> IRQ 22 Mode:1 Active:1)
    00:00:11[C] -> 2-22 -> IRQ 22
    _CRS returns NULL! Using IRQ 23 for device (PCI Interrupt Link [ALKD]).
    ACPI: PCI Interrupt Link [ALKD] enabled at IRQ 23
    IOAPIC[0]: Set PCI routing entry (2-23 -> 0xe1 -> IRQ 23 Mode:1 Active:1)
    00:00:11[D] -> 2-23 -> IRQ 23
    Pin 2-16 already programmed
    Pin 2-17 already programmed
    Pin 2-18 already programmed
    Pin 2-19 already programmed
    Pin 2-23 already programmed
    Pin 2-23 already programmed
    Pin 2-23 already programmed
    Pin 2-23 already programmed
    number of MP IRQ sources: 15.
    number of IO-APIC #2 registers: 24.
    testing the IO APIC.......................
    IO APIC #2......
    .... register #00: 02000000
    ....... : physical APIC id: 02
    ....... : Delivery Type: 0
    ....... : LTS : 0
    .... register #01: 00178003
    ....... : max redirection entries: 0017
    ....... : PRQ implemented: 1
    ....... : IO APIC version: 0003
    .... IRQ redirection table:
    NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
    00 000 00 1 0 0 0 0 0 0 00
    01 001 01 0 0 0 0 0 1 1 39
    02 001 01 0 0 0 0 0 1 1 31
    03 001 01 0 0 0 0 0 1 1 41
    04 001 01 0 0 0 0 0 1 1 49
    05 001 01 0 0 0 0 0 1 1 51
    06 001 01 0 0 0 0 0 1 1 59
    07 001 01 0 0 0 0 0 1 1 61
    08 001 01 0 0 0 0 0 1 1 69
    09 001 01 0 1 0 1 0 1 1 71
    0a 001 01 0 0 0 0 0 1 1 79
    0b 001 01 0 0 0 0 0 1 1 81
    0c 001 01 0 0 0 0 0 1 1 89
    0d 001 01 0 0 0 0 0 1 1 91
    0e 001 01 0 0 0 0 0 1 1 99
    0f 001 01 0 0 0 0 0 1 1 A1
    10 001 01 1 1 0 1 0 1 1 C1
    11 001 01 1 1 0 1 0 1 1 A9
    12 001 01 1 1 0 1 0 1 1 B1
    13 001 01 1 1 0 1 0 1 1 B9
    14 001 01 1 1 0 1 0 1 1 D1
    15 001 01 1 1 0 1 0 1 1 C9
    16 001 01 1 1 0 1 0 1 1 D9
    17 001 01 1 1 0 1 0 1 1 E1
    IRQ to pin mappings:
    IRQ0 -> 0:2
    IRQ1 -> 0:1
    IRQ3 -> 0:3
    IRQ4 -> 0:4
    IRQ5 -> 0:5
    IRQ6 -> 0:6
    IRQ7 -> 0:7
    IRQ8 -> 0:8
    IRQ9 -> 0:9-> 0:9
    IRQ10 -> 0:10
    IRQ11 -> 0:11
    IRQ12 -> 0:12
    IRQ13 -> 0:13
    IRQ14 -> 0:14
    IRQ15 -> 0:15
    IRQ16 -> 0:16
    IRQ17 -> 0:17
    IRQ18 -> 0:18
    IRQ19 -> 0:19
    IRQ20 -> 0:20
    IRQ21 -> 0:21
    IRQ22 -> 0:22
    IRQ23 -> 0:23
    .................................... done.
    PCI: Using ACPI for IRQ routing
    PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off'
    Machine check exception polling timer started.
    ikconfig 0.7 with /proc/config*
    devfs: v1.22 (20021013) Richard Gooch (rgooch@atnf.csiro.au)
    devfs: boot_options: 0x1
    Initializing Cryptographic API
    PCI: Via IRQ fixup for 0000:00:10.0, from 7 to 5
    PCI: Via IRQ fixup for 0000:00:10.1, from 3 to 5
    PCI: Via IRQ fixup for 0000:00:10.2, from 10 to 5
    ACPI: Power Button (FF) [PWRF]
    ACPI: Processor [CPU0] (supports C1, 2 throttling states)
    pty: 256 Unix98 ptys configured
    Real Time Clock Driver v1.12
    8139too Fast Ethernet driver 0.9.26
    eth0: RealTek RTL8139 at 0xd0807000, 00:20:ed:68:3a:db, IRQ 18
    eth0: Identified 8139 chip type 'RTL-8100B/8139D'
    Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
    ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
    PDC20276: IDE controller at PCI slot 0000:00:0f.0
    PDC20276: chipset revision 1
    PDC20276: 100% native mode on irq 19
    ide2: BM-DMA at 0xd000-0xd007, BIOS settings: hde:pio, hdf:pio
    ide3: BM-DMA at 0xd008-0xd00f, BIOS settings: hdg:pio, hdh:pio
    hde: LITE-ON LTR-32123S, ATAPI CD/DVD-ROM drive
    Using anticipatory io scheduler
    ide2 at 0xc000-0xc007,0xc402 on irq 19
    VP_IDE: IDE controller at PCI slot 0000:00:11.1
    VP_IDE: chipset revision 6
    VP_IDE: not 100% native mode: will probe irqs later
    ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
    VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1
    ide0: BM-DMA at 0xe000-0xe007, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0xe008-0xe00f, BIOS settings: hdc:DMA, hdd:DMA
    hda: IC35L080AVVA07-0, ATA DISK drive
    ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
    hdc: IBM-DTLA-307045, ATA DISK drive
    hdd: IBM-DHEA-36480, ATA DISK drive
    ide1 at 0x170-0x177,0x376 on irq 15
    hda: max request size: 128KiB
    hda: 160836480 sectors (82348 MB) w/1863KiB Cache, CHS=65535/16/63, UDMA(100)
    /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 p4
    hdc: max request size: 128KiB
    hdc: 90069840 sectors (46115 MB) w/1916KiB Cache, CHS=65535/16/63, UDMA(100)
    /dev/ide/host0/bus1/target0/lun0: p1 p2
    hdd: max request size: 128KiB
    hdd: 12692736 sectors (6498 MB) w/476KiB Cache, CHS=12592/16/63, UDMA(33)
    /dev/ide/host0/bus1/target1/lun0: p1
    hde: ATAPI 40X CD-ROM CD-R/RW drive, 1984kB Cache
    Uniform CD-ROM driver Revision: 3.12
    mice: PS/2 mouse device common for all mice
    input: ImPS/2 Logitech Wheel Mouse on isa0060/serio1
    serio: i8042 AUX port at 0x60,0x64 irq 12
    input: AT Translated Set 2 keyboard on isa0060/serio0
    serio: i8042 KBD port at 0x60,0x64 irq 1
    NET: Registered protocol family 2
    IP: routing cache hash table of 2048 buckets, 16Kbytes
    TCP: Hash tables configured (established 16384 bind 32768)
    NET: Registered protocol family 1
    NET: Registered protocol family 15
    NET: Registered protocol family 8
    NET: Registered protocol family 20
    ACPI: (supports S0 S1 S4 S5)
    found reiserfs format "3.6" with standard journal
    Reiserfs journal params: device hda1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
    reiserfs: checking transaction log (hda1) for (hda1)
    reiserfs: replayed 63 transactions in 2 seconds
    Using r5 hash to sort names
    VFS: Mounted root (reiserfs filesystem) readonly.
    Mounted devfs on /dev
    Freeing unused kernel memory: 132k freed
    Adding 265064k swap on /dev/hda2. Priority:-1 extents:1
    NTFS driver 2.1.5 [Flags: R/W MODULE].
    NTFS volume version 3.0.
    found reiserfs format "3.6" with standard journal
    Reiserfs journal params: device hda4, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
    reiserfs: checking transaction log (hda4) for (hda4)
    Using r5 hash to sort names
    cdrom: open failed.
    found reiserfs format "3.6" with standard journal
    Reiserfs journal params: device hdd1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
    reiserfs: checking transaction log (hdd1) for (hdd1)
    Using r5 hash to sort names
    drivers/usb/core/usb.c: registered new driver usbfs
    drivers/usb/core/usb.c: registered new driver hub
    ehci_hcd 0000:00:10.3: EHCI Host Controller
    ehci_hcd 0000:00:10.3: irq 21, pci mem d0ac4000
    ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 1
    ehci_hcd 0000:00:10.3: USB 2.0 enabled, EHCI 1.00, driver 2003-Jun-13
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 6 ports detected
    drivers/usb/host/uhci-hcd.c: USB Universal Host Controller Interface driver v2.1
    uhci_hcd 0000:00:10.0: UHCI Host Controller
    uhci_hcd 0000:00:10.0: irq 21, io base 0000d400
    uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
    hub 2-0:1.0: USB hub found
    hub 2-0:1.0: 2 ports detected
    uhci_hcd 0000:00:10.1: UHCI Host Controller
    uhci_hcd 0000:00:10.1: irq 21, io base 0000d800
    uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
    hub 3-0:1.0: USB hub found
    hub 3-0:1.0: 2 ports detected
    uhci_hcd 0000:00:10.2: UHCI Host Controller
    uhci_hcd 0000:00:10.2: irq 21, io base 0000dc00
    uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
    hub 4-0:1.0: USB hub found
    hub 4-0:1.0: 2 ports detected
    atmsvc: no signaling demon
    hub 2-0:1.0: new USB device on port 1, assigned address 2
    hub 2-0:1.0: new USB device on port 2, assigned address 3
    eth0: link down
    blk: queue c1382c00, I/O limit 4095Mb (mask 0xffffffff)
    blk: queue c1382400, I/O limit 4095Mb (mask 0xffffffff)
    drivers/usb/core/usb.c: registered new driver speedtch
    via82xx: Assuming DXS channels with 48k fixed sample rate.
    Please try dxs_support=1 option and report if it works on your machine.
    PCI: Setting latency timer of device 0000:00:11.5 to 64
    NET: Registered protocol family 17
    usb 2-2: bulk timeout on ep5in
    usbfs: USBDEVFS_BULK failed dev 3 ep 0x85 len 512 ret -110
    ip_tables: (C) 2000-2002 Netfilter core team
    ip_conntrack version 2.1 (2047 buckets, 16376 max) - 300 bytes per conntrack
    usbfs: process 1094 (modem_run) did not claim interface 0 before use
    HTB init, kernel part version 3.13
    #
    # Automatically generated make config: don't edit
    #
    CONFIG_X86=y
    CONFIG_MMU=y
    CONFIG_UID16=y
    CONFIG_GENERIC_ISA_DMA=y

    #
    # Code maturity level options
    #
    CONFIG_EXPERIMENTAL=y
    CONFIG_CLEAN_COMPILE=y
    CONFIG_STANDALONE=y
    CONFIG_BROKEN_ON_SMP=y

    #
    # General setup
    #
    CONFIG_SWAP=y
    CONFIG_SYSVIPC=y
    CONFIG_BSD_PROCESS_ACCT=y
    CONFIG_SYSCTL=y
    CONFIG_LOG_BUF_SHIFT=14
    CONFIG_IKCONFIG=y
    CONFIG_IKCONFIG_PROC=y
    # CONFIG_EMBEDDED is not set
    CONFIG_KALLSYMS=y
    CONFIG_FUTEX=y
    CONFIG_EPOLL=y
    CONFIG_IOSCHED_NOOP=y
    CONFIG_IOSCHED_AS=y
    CONFIG_IOSCHED_DEADLINE=y
    CONFIG_IOSCHED_CFQ=y
    # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set

    #
    # Loadable module support
    #
    CONFIG_MODULES=y
    CONFIG_MODULE_UNLOAD=y
    # CONFIG_MODULE_FORCE_UNLOAD is not set
    CONFIG_OBSOLETE_MODPARM=y
    # CONFIG_MODVERSIONS is not set
    CONFIG_KMOD=y

    #
    # Processor type and features
    #
    CONFIG_X86_PC=y
    # CONFIG_X86_VOYAGER is not set
    # CONFIG_X86_NUMAQ is not set
    # CONFIG_X86_SUMMIT is not set
    # CONFIG_X86_BIGSMP is not set
    # CONFIG_X86_VISWS is not set
    # CONFIG_X86_GENERICARCH is not set
    # CONFIG_X86_ES7000 is not set
    # CONFIG_M386 is not set
    # CONFIG_M486 is not set
    # CONFIG_M586 is not set
    # CONFIG_M586TSC is not set
    # CONFIG_M586MMX is not set
    # CONFIG_M686 is not set
    # CONFIG_MPENTIUMII is not set
    # CONFIG_MPENTIUMIII is not set
    # CONFIG_MPENTIUM4 is not set
    # CONFIG_MK6 is not set
    CONFIG_MK7=y
    # CONFIG_MK8 is not set
    # CONFIG_MELAN is not set
    # CONFIG_MCRUSOE is not set
    # CONFIG_MWINCHIPC6 is not set
    # CONFIG_MWINCHIP2 is not set
    # CONFIG_MWINCHIP3D is not set
    # CONFIG_MCYRIXIII is not set
    # CONFIG_MVIAC3_2 is not set
    # CONFIG_X86_GENERIC is not set
    CONFIG_X86_CMPXCHG=y
    CONFIG_X86_XADD=y
    CONFIG_X86_L1_CACHE_SHIFT=6
    CONFIG_RWSEM_XCHGADD_ALGORITHM=y
    CONFIG_X86_WP_WORKS_OK=y
    CONFIG_X86_INVLPG=y
    CONFIG_X86_BSWAP=y
    CONFIG_X86_POPAD_OK=y
    CONFIG_X86_GOOD_APIC=y
    CONFIG_X86_INTEL_USERCOPY=y
    CONFIG_X86_USE_PPRO_CHECKSUM=y
    CONFIG_X86_USE_3DNOW=y
    # CONFIG_X86_4G is not set
    # CONFIG_X86_SWITCH_PAGETABLES is not set
    # CONFIG_X86_4G_VM_LAYOUT is not set
    # CONFIG_X86_UACCESS_INDIRECT is not set
    # CONFIG_X86_HIGH_ENTRY is not set
    CONFIG_HPET_TIMER=y
    CONFIG_HPET_EMULATE_RTC=y
    # CONFIG_SMP is not set
    CONFIG_PREEMPT=y
    CONFIG_X86_UP_APIC=y
    CONFIG_X86_UP_IOAPIC=y
    CONFIG_X86_LOCAL_APIC=y
    CONFIG_X86_IO_APIC=y
    CONFIG_X86_TSC=y
    CONFIG_X86_MCE=y
    CONFIG_X86_MCE_NONFATAL=y
    # CONFIG_X86_MCE_P4THERMAL is not set
    # CONFIG_TOSHIBA is not set
    # CONFIG_I8K is not set
    # CONFIG_MICROCODE is not set
    # CONFIG_X86_MSR is not set
    # CONFIG_X86_CPUID is not set
    # CONFIG_EDD is not set
    CONFIG_NOHIGHMEM=y
    # CONFIG_HIGHMEM4G is not set
    # CONFIG_HIGHMEM64G is not set
    # CONFIG_MATH_EMULATION is not set
    CONFIG_MTRR=y
    # CONFIG_EFI is not set
    CONFIG_HAVE_DEC_LOCK=y

    #
    # Power management options (ACPI, APM)
    #
    CONFIG_PM=y
    CONFIG_SOFTWARE_SUSPEND=y
    # CONFIG_PM_DISK is not set

    #
    # ACPI (Advanced Configuration and Power Interface) Support
    #
    CONFIG_ACPI=y
    CONFIG_ACPI_BOOT=y
    CONFIG_ACPI_INTERPRETER=y
    CONFIG_ACPI_SLEEP=y
    CONFIG_ACPI_SLEEP_PROC_FS=y
    # CONFIG_ACPI_AC is not set
    # CONFIG_ACPI_BATTERY is not set
    CONFIG_ACPI_BUTTON=y
    CONFIG_ACPI_FAN=y
    CONFIG_ACPI_PROCESSOR=y
    CONFIG_ACPI_THERMAL=y
    # CONFIG_ACPI_ASUS is not set
    # CONFIG_ACPI_TOSHIBA is not set
    # CONFIG_ACPI_DEBUG is not set
    CONFIG_ACPI_BUS=y
    CONFIG_ACPI_EC=y
    CONFIG_ACPI_POWER=y
    CONFIG_ACPI_PCI=y
    CONFIG_ACPI_SYSTEM=y
    # CONFIG_ACPI_RELAXED_AML is not set
    # CONFIG_X86_PM_TIMER is not set

    #
    # APM (Advanced Power Management) BIOS Support
    #
    # CONFIG_APM is not set

    #
    # CPU Frequency scaling
    #
    # CONFIG_CPU_FREQ is not set

    #
    # Bus options (PCI, PCMCIA, EISA, MCA, ISA)
    #
    CONFIG_PCI=y
    # CONFIG_PCI_GOBIOS is not set
    # CONFIG_PCI_GODIRECT is not set
    CONFIG_PCI_GOANY=y
    CONFIG_PCI_BIOS=y
    CONFIG_PCI_DIRECT=y
    # CONFIG_PCI_USE_VECTOR is not set
    # CONFIG_PCI_LEGACY_PROC is not set
    CONFIG_PCI_NAMES=y
    # CONFIG_ISA is not set
    # CONFIG_MCA is not set
    # CONFIG_SCx200 is not set
    CONFIG_HOTPLUG=y

    #
    # PCMCIA/CardBus support
    #
    # CONFIG_PCMCIA is not set

    #
    # PCI Hotplug Support
    #
    # CONFIG_HOTPLUG_PCI is not set

    #
    # Executable file formats
    #
    CONFIG_BINFMT_ELF=y
    CONFIG_BINFMT_AOUT=m
    CONFIG_BINFMT_MISC=m

    #
    # Device Drivers
    #

    #
    # Generic Driver Options
    #
    # CONFIG_FW_LOADER is not set

    #
    # Memory Technology Devices (MTD)
    #
    # CONFIG_MTD is not set

    #
    # Parallel port support
    #
    CONFIG_PARPORT=m
    CONFIG_PARPORT_PC=m
    CONFIG_PARPORT_PC_CML1=m
    # CONFIG_PARPORT_SERIAL is not set
    CONFIG_PARPORT_PC_FIFO=y
    # CONFIG_PARPORT_PC_SUPERIO is not set
    # CONFIG_PARPORT_OTHER is not set
    CONFIG_PARPORT_1284=y

    #
    # Plug and Play support
    #
    CONFIG_PNP=y
    # CONFIG_PNP_DEBUG is not set

    #
    # Protocols
    #
    # CONFIG_ISAPNP is not set
    CONFIG_PNPBIOS=y
    # CONFIG_PNPBIOS_PROC_FS is not set

    #
    # Block devices
    #
    CONFIG_BLK_DEV_FD=m
    CONFIG_PARIDE=m
    CONFIG_PARIDE_PARPORT=m

    #
    # Parallel IDE high-level drivers
    #
    # CONFIG_PARIDE_PD is not set
    # CONFIG_PARIDE_PCD is not set
    # CONFIG_PARIDE_PF is not set
    # CONFIG_PARIDE_PT is not set
    # CONFIG_PARIDE_PG is not set

    #
    # Parallel IDE protocol modules
    #
    # CONFIG_PARIDE_ATEN is not set
    # CONFIG_PARIDE_BPCK is not set
    # CONFIG_PARIDE_BPCK6 is not set
    # CONFIG_PARIDE_COMM is not set
    # CONFIG_PARIDE_DSTR is not set
    # CONFIG_PARIDE_FIT2 is not set
    # CONFIG_PARIDE_FIT3 is not set
    # CONFIG_PARIDE_EPAT is not set
    # CONFIG_PARIDE_EPIA is not set
    # CONFIG_PARIDE_FRIQ is not set
    # CONFIG_PARIDE_FRPW is not set
    # CONFIG_PARIDE_KBIC is not set
    # CONFIG_PARIDE_KTTI is not set
    # CONFIG_PARIDE_ON20 is not set
    # CONFIG_PARIDE_ON26 is not set
    # CONFIG_BLK_CPQ_DA is not set
    # CONFIG_BLK_CPQ_CISS_DA is not set
    # CONFIG_BLK_DEV_DAC960 is not set
    # CONFIG_BLK_DEV_UMEM is not set
    CONFIG_BLK_DEV_LOOP=m
    CONFIG_BLK_DEV_CRYPTOLOOP=m
    CONFIG_BLK_DEV_NBD=m
    CONFIG_BLK_DEV_RAM=m
    CONFIG_BLK_DEV_RAM_SIZE=4096
    # CONFIG_BLK_DEV_INITRD is not set
    # CONFIG_LBD is not set

    #
    # ATA/ATAPI/MFM/RLL support
    #
    CONFIG_IDE=y
    CONFIG_BLK_DEV_IDE=y

    #
    # Please see Documentation/ide.txt for help/info on IDE drives
    #
    # CONFIG_BLK_DEV_HD_IDE is not set
    CONFIG_BLK_DEV_IDEDISK=y
    # CONFIG_IDEDISK_MULTI_MODE is not set
    # CONFIG_IDEDISK_STROKE is not set
    CONFIG_BLK_DEV_IDECD=y
    # CONFIG_BLK_DEV_IDETAPE is not set
    # CONFIG_BLK_DEV_IDEFLOPPY is not set
    CONFIG_IDE_TASK_IOCTL=y
    CONFIG_IDE_TASKFILE_IO=y

    #
    # IDE chipset support/bugfixes
    #
    # CONFIG_BLK_DEV_CMD640 is not set
    # CONFIG_BLK_DEV_IDEPNP is not set
    CONFIG_BLK_DEV_IDEPCI=y
    CONFIG_IDEPCI_SHARE_IRQ=y
    # CONFIG_BLK_DEV_OFFBOARD is not set
    CONFIG_BLK_DEV_GENERIC=y
    # CONFIG_BLK_DEV_OPTI621 is not set
    # CONFIG_BLK_DEV_RZ1000 is not set
    CONFIG_BLK_DEV_IDEDMA_PCI=y
    # CONFIG_BLK_DEV_IDEDMA_FORCED is not set
    CONFIG_IDEDMA_PCI_AUTO=y
    # CONFIG_IDEDMA_ONLYDISK is not set
    # CONFIG_IDEDMA_PCI_WIP is not set
    CONFIG_BLK_DEV_ADMA=y
    # CONFIG_BLK_DEV_AEC62XX is not set
    # CONFIG_BLK_DEV_ALI15X3 is not set
    # CONFIG_BLK_DEV_AMD74XX is not set
    # CONFIG_BLK_DEV_CMD64X is not set
    # CONFIG_BLK_DEV_TRIFLEX is not set
    # CONFIG_BLK_DEV_CY82C693 is not set
    # CONFIG_BLK_DEV_CS5520 is not set
    # CONFIG_BLK_DEV_CS5530 is not set
    # CONFIG_BLK_DEV_HPT34X is not set
    # CONFIG_BLK_DEV_HPT366 is not set
    # CONFIG_BLK_DEV_SC1200 is not set
    # CONFIG_BLK_DEV_PIIX is not set
    # CONFIG_BLK_DEV_NS87415 is not set
    # CONFIG_BLK_DEV_PDC202XX_OLD is not set
    CONFIG_BLK_DEV_PDC202XX_NEW=y
    CONFIG_PDC202XX_FORCE=y
    # CONFIG_BLK_DEV_SVWKS is not set
    # CONFIG_BLK_DEV_SIIMAGE is not set
    # CONFIG_BLK_DEV_SIS5513 is not set
    # CONFIG_BLK_DEV_SLC90E66 is not set
    # CONFIG_BLK_DEV_TRM290 is not set
    CONFIG_BLK_DEV_VIA82CXXX=y
    CONFIG_BLK_DEV_IDEDMA=y
    # CONFIG_IDEDMA_IVB is not set
    CONFIG_IDEDMA_AUTO=y
    # CONFIG_DMA_NONPCI is not set
    # CONFIG_BLK_DEV_HD is not set

    #
    # SCSI device support
    #
    # CONFIG_SCSI is not set

    #
    # Multi-device support (RAID and LVM)
    #
    # CONFIG_MD is not set

    #
    # Fusion MPT device support
    #

    #
    # IEEE 1394 (FireWire) support (EXPERIMENTAL)
    #
    # CONFIG_IEEE1394 is not set

    #
    # I2O device support
    #
    # CONFIG_I2O is not set

    #
    # Networking support
    #
    CONFIG_NET=y

    #
    # Networking options
    #
    CONFIG_PACKET=m
    CONFIG_PACKET_MMAP=y
    # CONFIG_NETLINK_DEV is not set
    CONFIG_UNIX=y
    CONFIG_NET_KEY=y
    CONFIG_INET=y
    # CONFIG_IP_MULTICAST is not set
    # CONFIG_IP_ADVANCED_ROUTER is not set
    # CONFIG_IP_PNP is not set
    # CONFIG_NET_IPIP is not set
    # CONFIG_NET_IPGRE is not set
    # CONFIG_ARPD is not set
    CONFIG_INET_ECN=y
    CONFIG_SYN_COOKIES=y
    # CONFIG_INET_AH is not set
    # CONFIG_INET_ESP is not set
    # CONFIG_INET_IPCOMP is not set

    #
    # IP: Virtual Server Configuration
    #
    # CONFIG_IP_VS is not set
    # CONFIG_IPV6 is not set
    # CONFIG_DECNET is not set
    # CONFIG_BRIDGE is not set
    CONFIG_NETFILTER=y
    # CONFIG_NETFILTER_DEBUG is not set

    #
    # IP: Netfilter Configuration
    #
    CONFIG_IP_NF_CONNTRACK=m
    CONFIG_IP_NF_FTP=m
    CONFIG_IP_NF_IRC=m
    # CONFIG_IP_NF_TFTP is not set
    # CONFIG_IP_NF_AMANDA is not set
    CONFIG_IP_NF_QUEUE=m
    CONFIG_IP_NF_IPTABLES=m
    CONFIG_IP_NF_MATCH_LIMIT=m
    CONFIG_IP_NF_MATCH_IPRANGE=m
    CONFIG_IP_NF_MATCH_MAC=m
    CONFIG_IP_NF_MATCH_PKTTYPE=m
    CONFIG_IP_NF_MATCH_MARK=m
    CONFIG_IP_NF_MATCH_MULTIPORT=m
    CONFIG_IP_NF_MATCH_TOS=m
    CONFIG_IP_NF_MATCH_RECENT=m
    CONFIG_IP_NF_MATCH_ECN=m
    CONFIG_IP_NF_MATCH_DSCP=m
    CONFIG_IP_NF_MATCH_AH_ESP=m
    CONFIG_IP_NF_MATCH_LENGTH=m
    CONFIG_IP_NF_MATCH_TTL=m
    CONFIG_IP_NF_MATCH_TCPMSS=m
    CONFIG_IP_NF_MATCH_HELPER=m
    CONFIG_IP_NF_MATCH_STATE=m
    CONFIG_IP_NF_MATCH_CONNTRACK=m
    CONFIG_IP_NF_MATCH_OWNER=m
    CONFIG_IP_NF_FILTER=m
    CONFIG_IP_NF_TARGET_REJECT=m
    CONFIG_IP_NF_NAT=m
    CONFIG_IP_NF_NAT_NEEDED=y
    CONFIG_IP_NF_TARGET_MASQUERADE=m
    CONFIG_IP_NF_TARGET_REDIRECT=m
    CONFIG_IP_NF_TARGET_NETMAP=m
    # CONFIG_IP_NF_TARGET_SAME is not set
    # CONFIG_IP_NF_NAT_LOCAL is not set
    # CONFIG_IP_NF_NAT_SNMP_BASIC is not set
    CONFIG_IP_NF_NAT_IRC=m
    CONFIG_IP_NF_NAT_FTP=m
    CONFIG_IP_NF_MANGLE=m
    CONFIG_IP_NF_TARGET_TOS=m
    CONFIG_IP_NF_TARGET_ECN=m
    CONFIG_IP_NF_TARGET_DSCP=m
    CONFIG_IP_NF_TARGET_MARK=m
    CONFIG_IP_NF_TARGET_CLASSIFY=m
    CONFIG_IP_NF_TARGET_LOG=m
    CONFIG_IP_NF_TARGET_ULOG=m
    CONFIG_IP_NF_TARGET_TCPMSS=m
    # CONFIG_IP_NF_ARPTABLES is not set
    # CONFIG_IP_NF_COMPAT_IPCHAINS is not set
    # CONFIG_IP_NF_COMPAT_IPFWADM is not set
    CONFIG_XFRM=y
    # CONFIG_XFRM_USER is not set

    #
    # SCTP Configuration (EXPERIMENTAL)
    #
    CONFIG_IPV6_SCTP__=y
    # CONFIG_IP_SCTP is not set
    CONFIG_ATM=y
    CONFIG_ATM_CLIP=m
    CONFIG_ATM_CLIP_NO_ICMP=y
    CONFIG_ATM_LANE=m
    CONFIG_ATM_MPOA=m
    CONFIG_ATM_BR2684=m
    # CONFIG_ATM_BR2684_IPFILTER is not set
    # CONFIG_VLAN_8021Q is not set
    # CONFIG_LLC2 is not set
    # CONFIG_IPX is not set
    # CONFIG_ATALK is not set
    # CONFIG_X25 is not set
    # CONFIG_LAPB is not set
    # CONFIG_NET_DIVERT is not set
    # CONFIG_ECONET is not set
    # CONFIG_WAN_ROUTER is not set
    # CONFIG_NET_FASTROUTE is not set
    # CONFIG_NET_HW_FLOWCONTROL is not set

    #
    # QoS and/or fair queueing
    #
    CONFIG_NET_SCHED=y
    CONFIG_NET_SCH_CBQ=m
    CONFIG_NET_SCH_HTB=m
    CONFIG_NET_SCH_CSZ=m
    # CONFIG_NET_SCH_ATM is not set
    CONFIG_NET_SCH_PRIO=m
    CONFIG_NET_SCH_RED=m
    CONFIG_NET_SCH_SFQ=m
    CONFIG_NET_SCH_TEQL=m
    CONFIG_NET_SCH_TBF=m
    CONFIG_NET_SCH_GRED=m
    CONFIG_NET_SCH_DSMARK=m
    CONFIG_NET_SCH_INGRESS=m
    CONFIG_NET_QOS=y
    CONFIG_NET_ESTIMATOR=y
    CONFIG_NET_CLS=y
    CONFIG_NET_CLS_TCINDEX=m
    CONFIG_NET_CLS_ROUTE4=m
    CONFIG_NET_CLS_ROUTE=y
    CONFIG_NET_CLS_FW=m
    CONFIG_NET_CLS_U32=m
    CONFIG_NET_CLS_RSVP=m
    CONFIG_NET_CLS_RSVP6=m
    CONFIG_NET_CLS_POLICE=y

    #
    # Network testing
    #
    # CONFIG_NET_PKTGEN is not set
    CONFIG_NETDEVICES=y

    #
    # ARCnet devices
    #
    # CONFIG_ARCNET is not set
    CONFIG_DUMMY=m
    # CONFIG_BONDING is not set
    # CONFIG_EQUALIZER is not set
    # CONFIG_TUN is not set
    # CONFIG_NET_SB1000 is not set

    #
    # Ethernet (10 or 100Mbit)
    #
    CONFIG_NET_ETHERNET=y
    CONFIG_MII=y
    # CONFIG_HAPPYMEAL is not set
    # CONFIG_SUNGEM is not set
    # CONFIG_NET_VENDOR_3COM is not set

    #
    # Tulip family network device support
    #
    # CONFIG_NET_TULIP is not set
    # CONFIG_HP100 is not set
    CONFIG_NET_PCI=y
    # CONFIG_PCNET32 is not set
    # CONFIG_AMD8111_ETH is not set
    # CONFIG_ADAPTEC_STARFIRE is not set
    # CONFIG_B44 is not set
    # CONFIG_FORCEDETH is not set
    # CONFIG_DGRS is not set
    # CONFIG_EEPRO100 is not set
    # CONFIG_E100 is not set
    # CONFIG_FEALNX is not set
    # CONFIG_NATSEMI is not set
    # CONFIG_NE2K_PCI is not set
    # CONFIG_8139CP is not set
    CONFIG_8139TOO=y
    # CONFIG_8139TOO_PIO is not set
    # CONFIG_8139TOO_TUNE_TWISTER is not set
    # CONFIG_8139TOO_8129 is not set
    # CONFIG_8139_OLD_RX_RESET is not set
    # CONFIG_SIS900 is not set
    # CONFIG_EPIC100 is not set
    # CONFIG_SUNDANCE is not set
    # CONFIG_TLAN is not set
    # CONFIG_VIA_RHINE is not set

    #
    # Ethernet (1000 Mbit)
    #
    # CONFIG_ACENIC is not set
    # CONFIG_DL2K is not set
    # CONFIG_E1000 is not set
    # CONFIG_NS83820 is not set
    # CONFIG_HAMACHI is not set
    # CONFIG_YELLOWFIN is not set
    # CONFIG_R8169 is not set
    # CONFIG_SIS190 is not set
    # CONFIG_SK98LIN is not set
    # CONFIG_TIGON3 is not set

    #
    # Ethernet (10000 Mbit)
    #
    # CONFIG_IXGB is not set
    # CONFIG_FDDI is not set
    # CONFIG_HIPPI is not set
    # CONFIG_PLIP is not set
    CONFIG_PPP=m
    CONFIG_PPP_MULTILINK=y
    CONFIG_PPP_FILTER=y
    CONFIG_PPP_ASYNC=m
    CONFIG_PPP_SYNC_TTY=m
    CONFIG_PPP_DEFLATE=m
    CONFIG_PPP_BSDCOMP=m
    CONFIG_PPPOE=m
    CONFIG_PPPOATM=m
    CONFIG_SLIP=m
    CONFIG_SLIP_COMPRESSED=y
    CONFIG_SLIP_SMART=y
    # CONFIG_SLIP_MODE_SLIP6 is not set

    #
    # Wireless LAN (non-hamradio)
    #
    # CONFIG_NET_RADIO is not set

    #
    # Token Ring devices
    #
    # CONFIG_TR is not set
    # CONFIG_RCPCI is not set
    # CONFIG_SHAPER is not set
    # CONFIG_NET_POLL_CONTROLLER is not set

    #
    # Wan interfaces
    #
    # CONFIG_WAN is not set

    #
    # ATM drivers
    #
    # CONFIG_ATM_TCP is not set
    # CONFIG_ATM_LANAI is not set
    # CONFIG_ATM_ENI is not set
    # CONFIG_ATM_FIRESTREAM is not set
    # CONFIG_ATM_ZATM is not set
    # CONFIG_ATM_NICSTAR is not set
    # CONFIG_ATM_IDT77252 is not set
    # CONFIG_ATM_AMBASSADOR is not set
    # CONFIG_ATM_HORIZON is not set
    # CONFIG_ATM_IA is not set
    # CONFIG_ATM_FORE200E_MAYBE is not set
    # CONFIG_ATM_HE is not set

    #
    # Amateur Radio support
    #
    # CONFIG_HAMRADIO is not set

    #
    # IrDA (infrared) support
    #
    # CONFIG_IRDA is not set

    #
    # Bluetooth support
    #
    # CONFIG_BT is not set

    #
    # ISDN subsystem
    #
    # CONFIG_ISDN_BOOL is not set

    #
    # Telephony Support
    #
    # CONFIG_PHONE is not set

    #
    # Input device support
    #
    CONFIG_INPUT=y

    #
    # Userland interfaces
    #
    CONFIG_INPUT_MOUSEDEV=y
    CONFIG_INPUT_MOUSEDEV_PSAUX=y
    CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
    CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
    CONFIG_INPUT_JOYDEV=y
    # CONFIG_INPUT_TSDEV is not set
    # CONFIG_INPUT_EVDEV is not set
    # CONFIG_INPUT_EVBUG is not set

    #
    # Input I/O drivers
    #
    # CONFIG_GAMEPORT is not set
    CONFIG_SOUND_GAMEPORT=y
    CONFIG_SERIO=y
    CONFIG_SERIO_I8042=y
    CONFIG_SERIO_SERPORT=y
    # CONFIG_SERIO_CT82C710 is not set
    # CONFIG_SERIO_PARKBD is not set
    # CONFIG_SERIO_PCIPS2 is not set

    #
    # Input Device Drivers
    #
    CONFIG_INPUT_KEYBOARD=y
    CONFIG_KEYBOARD_ATKBD=y
    # CONFIG_KEYBOARD_SUNKBD is not set
    # CONFIG_KEYBOARD_XTKBD is not set
    # CONFIG_KEYBOARD_NEWTON is not set
    CONFIG_INPUT_MOUSE=y
    CONFIG_MOUSE_PS2=y
    # CONFIG_MOUSE_PS2_SYNAPTICS is not set
    # CONFIG_MOUSE_SERIAL is not set
    # CONFIG_INPUT_JOYSTICK is not set
    # CONFIG_INPUT_TOUCHSCREEN is not set
    # CONFIG_INPUT_MISC is not set

    #
    # Character devices
    #
    CONFIG_VT=y
    CONFIG_VT_CONSOLE=y
    CONFIG_HW_CONSOLE=y
    # CONFIG_SERIAL_NONSTANDARD is not set

    #
    # Serial drivers
    #
    CONFIG_SERIAL_8250=m
    # CONFIG_SERIAL_8250_ACPI is not set
    CONFIG_SERIAL_8250_NR_UARTS=4
    # CONFIG_SERIAL_8250_EXTENDED is not set

    #
    # Non-8250 serial port support
    #
    CONFIG_SERIAL_CORE=m
    CONFIG_UNIX98_PTYS=y
    CONFIG_UNIX98_PTY_COUNT=256
    CONFIG_PRINTER=m
    # CONFIG_LP_CONSOLE is not set
    # CONFIG_PPDEV is not set
    # CONFIG_TIPAR is not set

    #
    # I2C support
    #
    CONFIG_I2C=m
    CONFIG_I2C_CHARDEV=m

    #
    # I2C Algorithms
    #
    CONFIG_I2C_ALGOBIT=m
    # CONFIG_I2C_ALGOPCF is not set

    #
    # I2C Hardware Bus support
    #
    # CONFIG_I2C_ALI1535 is not set
    # CONFIG_I2C_ALI15X3 is not set
    # CONFIG_I2C_AMD756 is not set
    # CONFIG_I2C_AMD8111 is not set
    # CONFIG_I2C_I801 is not set
    # CONFIG_I2C_I810 is not set
    # CONFIG_I2C_NFORCE2 is not set
    # CONFIG_I2C_PHILIPSPAR is not set
    # CONFIG_I2C_PIIX4 is not set
    # CONFIG_I2C_PROSAVAGE is not set
    # CONFIG_I2C_SAVAGE4 is not set
    # CONFIG_SCx200_ACB is not set
    # CONFIG_I2C_SIS5595 is not set
    # CONFIG_I2C_SIS630 is not set
    # CONFIG_I2C_SIS96X is not set
    CONFIG_I2C_VIA=m
    CONFIG_I2C_VIAPRO=m
    # CONFIG_I2C_VOODOO3 is not set

    #
    # I2C Hardware Sensors Chip support
    #
    CONFIG_I2C_SENSOR=m
    CONFIG_SENSORS_ADM1021=m
    CONFIG_SENSORS_EEPROM=m
    CONFIG_SENSORS_IT87=m
    CONFIG_SENSORS_LM75=m
    CONFIG_SENSORS_LM78=m
    CONFIG_SENSORS_LM85=m
    CONFIG_SENSORS_VIA686A=m
    # CONFIG_SENSORS_W83781D is not set

    #
    # Linux InfraRed Controller
    #
    CONFIG_LIRC_ATIUSB=m
    # CONFIG_LIRC_SUPPORT is not set

    #
    # Mice
    #
    # CONFIG_BUSMOUSE is not set
    # CONFIG_QIC02_TAPE is not set

    #
    # IPMI
    #
    # CONFIG_IPMI_HANDLER is not set

    #
    # Watchdog Cards
    #
    # CONFIG_WATCHDOG is not set
    # CONFIG_HW_RANDOM is not set
    # CONFIG_NVRAM is not set
    CONFIG_RTC=y
    # CONFIG_DTLK is not set
    # CONFIG_R3964 is not set
    # CONFIG_APPLICOM is not set
    # CONFIG_SONYPI is not set

    #
    # Ftape, the floppy tape device driver
    #
    # CONFIG_FTAPE is not set
    CONFIG_AGP=m
    # CONFIG_AGP_ALI is not set
    # CONFIG_AGP_ATI is not set
    # CONFIG_AGP_AMD is not set
    # CONFIG_AGP_AMD64 is not set
    # CONFIG_AGP_INTEL is not set
    # CONFIG_AGP_NVIDIA is not set
    # CONFIG_AGP_SIS is not set
    # CONFIG_AGP_SWORKS is not set
    CONFIG_AGP_VIA=m
    # CONFIG_DRM is not set
    # CONFIG_MWAVE is not set
    # CONFIG_RAW_DRIVER is not set
    # CONFIG_HANGCHECK_TIMER is not set

    #
    # Multimedia devices
    #
    CONFIG_VIDEO_DEV=m

    #
    # Video For Linux
    #

    #
    # Video Adapters
    #
    CONFIG_VIDEO_BT848=m
    # CONFIG_VIDEO_BWQCAM is not set
    # CONFIG_VIDEO_CQCAM is not set
    # CONFIG_VIDEO_W9966 is not set
    # CONFIG_VIDEO_CPIA is not set
    # CONFIG_VIDEO_SAA5249 is not set
    # CONFIG_TUNER_3036 is not set
    # CONFIG_VIDEO_STRADIS is not set
    # CONFIG_VIDEO_ZORAN is not set
    # CONFIG_VIDEO_SAA7134 is not set
    # CONFIG_VIDEO_MXB is not set
    # CONFIG_VIDEO_DPC is not set
    # CONFIG_VIDEO_HEXIUM_ORION is not set
    # CONFIG_VIDEO_HEXIUM_GEMINI is not set

    #
    # Radio Adapters
    #
    # CONFIG_RADIO_GEMTEK_PCI is not set
    # CONFIG_RADIO_MAXIRADIO is not set
    # CONFIG_RADIO_MAESTRO is not set

    #
    # Digital Video Broadcasting Devices
    #
    # CONFIG_DVB is not set
    CONFIG_VIDEO_TUNER=m
    CONFIG_VIDEO_BUF=m
    CONFIG_VIDEO_BTCX=m
    CONFIG_VIDEO_IR=m

    #
    # Graphics support
    #
    # CONFIG_FB is not set
    # CONFIG_VIDEO_SELECT is not set

    #
    # Console display driver support
    #
    CONFIG_VGA_CONSOLE=y
    # CONFIG_MDA_CONSOLE is not set
    CONFIG_DUMMY_CONSOLE=y

    #
    # Sound
    #
    CONFIG_SOUND=m

    #
    # Advanced Linux Sound Architecture
    #
    CONFIG_SND=m
    CONFIG_SND_SEQUENCER=m
    # CONFIG_SND_SEQ_DUMMY is not set
    CONFIG_SND_OSSEMUL=y
    CONFIG_SND_MIXER_OSS=m
    CONFIG_SND_PCM_OSS=m
    CONFIG_SND_SEQUENCER_OSS=y
    CONFIG_SND_RTCTIMER=m
    # CONFIG_SND_VERBOSE_PRINTK is not set
    # CONFIG_SND_DEBUG is not set

    #
    # Generic devices
    #
    # CONFIG_SND_DUMMY is not set
    # CONFIG_SND_VIRMIDI is not set
    # CONFIG_SND_MTPAV is not set
    # CONFIG_SND_SERIAL_U16550 is not set
    # CONFIG_SND_MPU401 is not set

    #
    # PCI devices
    #
    # CONFIG_SND_ALI5451 is not set
    # CONFIG_SND_AZT3328 is not set
    # CONFIG_SND_CS46XX is not set
    # CONFIG_SND_CS4281 is not set
    # CONFIG_SND_EMU10K1 is not set
    # CONFIG_SND_KORG1212 is not set
    # CONFIG_SND_NM256 is not set
    # CONFIG_SND_RME32 is not set
    # CONFIG_SND_RME96 is not set
    # CONFIG_SND_RME9652 is not set
    # CONFIG_SND_HDSP is not set
    # CONFIG_SND_TRIDENT is not set
    # CONFIG_SND_YMFPCI is not set
    # CONFIG_SND_ALS4000 is not set
    # CONFIG_SND_CMIPCI is not set
    # CONFIG_SND_ENS1370 is not set
    # CONFIG_SND_ENS1371 is not set
    # CONFIG_SND_ES1938 is not set
    # CONFIG_SND_ES1968 is not set
    # CONFIG_SND_MAESTRO3 is not set
    # CONFIG_SND_FM801 is not set
    # CONFIG_SND_ICE1712 is not set
    # CONFIG_SND_ICE1724 is not set
    # CONFIG_SND_INTEL8X0 is not set
    # CONFIG_SND_SONICVIBES is not set
    CONFIG_SND_VIA82XX=m
    # CONFIG_SND_VX222 is not set

    #
    # ALSA USB devices
    #
    # CONFIG_SND_USB_AUDIO is not set

    #
    # Open Sound System
    #
    # CONFIG_SOUND_PRIME is not set

    #
    # USB support
    #
    CONFIG_USB=m
    # CONFIG_USB_DEBUG is not set

    #
    # Miscellaneous USB options
    #
    CONFIG_USB_DEVICEFS=y
    CONFIG_USB_BANDWIDTH=y
    # CONFIG_USB_DYNAMIC_MINORS is not set

    #
    # USB Host Controller Drivers
    #
    CONFIG_USB_EHCI_HCD=m
    # CONFIG_USB_OHCI_HCD is not set
    CONFIG_USB_UHCI_HCD=m

    #
    # USB Device Class drivers
    #
    # CONFIG_USB_AUDIO is not set
    # CONFIG_USB_BLUETOOTH_TTY is not set
    # CONFIG_USB_MIDI is not set
    # CONFIG_USB_ACM is not set
    # CONFIG_USB_PRINTER is not set

    #
    # SCSI support is needed for USB Storage
    #
    # CONFIG_USB_STORAGE is not set

    #
    # USB Human Interface Devices (HID)
    #
    # CONFIG_USB_HID is not set

    #
    # USB HID Boot Protocol drivers
    #
    # CONFIG_USB_KBD is not set
    # CONFIG_USB_MOUSE is not set
    # CONFIG_USB_AIPTEK is not set
    # CONFIG_USB_WACOM is not set
    # CONFIG_USB_KBTAB is not set
    # CONFIG_USB_POWERMATE is not set
    # CONFIG_USB_XPAD is not set

    #
    # USB Imaging devices
    #
    # CONFIG_USB_MDC800 is not set
    # CONFIG_USB_SCANNER is not set

    #
    # USB Multimedia devices
    #
    # CONFIG_USB_DABUSB is not set
    # CONFIG_USB_VICAM is not set
    # CONFIG_USB_DSBR is not set
    # CONFIG_USB_IBMCAM is not set
    # CONFIG_USB_KONICAWC is not set
    # CONFIG_USB_OV511 is not set
    # CONFIG_USB_PWC is not set
    # CONFIG_USB_SE401 is not set
    # CONFIG_USB_STV680 is not set

    #
    # USB Network adaptors
    #
    # CONFIG_USB_CATC is not set
    # CONFIG_USB_KAWETH is not set
    # CONFIG_USB_PEGASUS is not set
    # CONFIG_USB_RTL8150 is not set
    # CONFIG_USB_USBNET is not set

    #
    # USB port drivers
    #
    # CONFIG_USB_USS720 is not set

    #
    # USB Serial Converter support
    #
    # CONFIG_USB_SERIAL is not set

    #
    # USB Miscellaneous drivers
    #
    # CONFIG_USB_TIGL is not set
    # CONFIG_USB_AUERSWALD is not set
    # CONFIG_USB_RIO500 is not set
    # CONFIG_USB_BRLVGER is not set
    # CONFIG_USB_LCD is not set
    CONFIG_USB_SPEEDTOUCH=m
    # CONFIG_USB_TEST is not set
    # CONFIG_USB_GADGET is not set

    #
    # File systems
    #
    CONFIG_EXT2_FS=m
    # CONFIG_EXT2_FS_XATTR is not set
    CONFIG_EXT3_FS=m
    CONFIG_EXT3_FS_XATTR=y
    # CONFIG_EXT3_FS_POSIX_ACL is not set
    # CONFIG_EXT3_FS_SECURITY is not set
    CONFIG_JBD=m
    # CONFIG_JBD_DEBUG is not set
    CONFIG_FS_MBCACHE=m
    CONFIG_REISERFS_FS=y
    # CONFIG_REISERFS_CHECK is not set
    # CONFIG_REISERFS_PROC_INFO is not set
    # CONFIG_JFS_FS is not set
    # CONFIG_XFS_FS is not set
    # CONFIG_MINIX_FS is not set
    # CONFIG_ROMFS_FS is not set
    # CONFIG_QUOTA is not set
    # CONFIG_AUTOFS_FS is not set
    # CONFIG_AUTOFS4_FS is not set

    #
    # CD-ROM/DVD Filesystems
    #
    CONFIG_ISO9660_FS=m
    CONFIG_JOLIET=y
    CONFIG_ZISOFS=y
    CONFIG_ZISOFS_FS=m
    # CONFIG_UDF_FS is not set

    #
    # DOS/FAT/NT Filesystems
    #
    CONFIG_FAT_FS=m
    # CONFIG_MSDOS_FS is not set
    CONFIG_VFAT_FS=m
    CONFIG_NTFS_FS=m
    # CONFIG_NTFS_DEBUG is not set
    CONFIG_NTFS_RW=y

    #
    # Pseudo filesystems
    #
    CONFIG_PROC_FS=y
    CONFIG_PROC_KCORE=y
    CONFIG_DEVFS_FS=y
    CONFIG_DEVFS_MOUNT=y
    # CONFIG_DEVFS_DEBUG is not set
    CONFIG_DEVPTS_FS=y
    # CONFIG_DEVPTS_FS_XATTR is not set
    CONFIG_TMPFS=y
    # CONFIG_HUGETLBFS is not set
    # CONFIG_HUGETLB_PAGE is not set
    CONFIG_RAMFS=y

    #
    # Miscellaneous filesystems
    #
    # CONFIG_ADFS_FS is not set
    # CONFIG_AFFS_FS is not set
    CONFIG_HFS_FS=m
    # CONFIG_BEFS_FS is not set
    # CONFIG_BFS_FS is not set
    # CONFIG_EFS_FS is not set
    # CONFIG_CRAMFS is not set
    # CONFIG_VXFS_FS is not set
    # CONFIG_HPFS_FS is not set
    # CONFIG_QNX4FS_FS is not set
    # CONFIG_SYSV_FS is not set
    # CONFIG_UFS_FS is not set

    #
    # Network File Systems
    #
    CONFIG_NFS_FS=m
    CONFIG_NFS_V3=y
    # CONFIG_NFS_V4 is not set
    CONFIG_NFS_DIRECTIO=y
    CONFIG_NFSD=m
    CONFIG_NFSD_V3=y
    # CONFIG_NFSD_V4 is not set
    # CONFIG_NFSD_TCP is not set
    CONFIG_LOCKD=m
    CONFIG_LOCKD_V4=y
    CONFIG_EXPORTFS=m
    CONFIG_SUNRPC=m
    # CONFIG_SUNRPC_GSS is not set
    CONFIG_SMB_FS=m
    # CONFIG_SMB_NLS_DEFAULT is not set
    # CONFIG_CIFS is not set
    # CONFIG_NCP_FS is not set
    # CONFIG_CODA_FS is not set
    # CONFIG_INTERMEZZO_FS is not set
    # CONFIG_AFS_FS is not set

    #
    # Partition Types
    #
    # CONFIG_PARTITION_ADVANCED is not set
    CONFIG_MSDOS_PARTITION=y

    #
    # Native Language Support
    #
    CONFIG_NLS=y
    CONFIG_NLS_DEFAULT="iso8859-1"
    CONFIG_NLS_CODEPAGE_437=m
    # CONFIG_NLS_CODEPAGE_737 is not set
    # CONFIG_NLS_CODEPAGE_775 is not set
    CONFIG_NLS_CODEPAGE_850=m
    # CONFIG_NLS_CODEPAGE_852 is not set
    # CONFIG_NLS_CODEPAGE_855 is not set
    # CONFIG_NLS_CODEPAGE_857 is not set
    # CONFIG_NLS_CODEPAGE_860 is not set
    # CONFIG_NLS_CODEPAGE_861 is not set
    # CONFIG_NLS_CODEPAGE_862 is not set
    # CONFIG_NLS_CODEPAGE_863 is not set
    # CONFIG_NLS_CODEPAGE_864 is not set
    # CONFIG_NLS_CODEPAGE_865 is not set
    # CONFIG_NLS_CODEPAGE_866 is not set
    # CONFIG_NLS_CODEPAGE_869 is not set
    # CONFIG_NLS_CODEPAGE_936 is not set
    # CONFIG_NLS_CODEPAGE_950 is not set
    # CONFIG_NLS_CODEPAGE_932 is not set
    # CONFIG_NLS_CODEPAGE_949 is not set
    # CONFIG_NLS_CODEPAGE_874 is not set
    # CONFIG_NLS_ISO8859_8 is not set
    # CONFIG_NLS_CODEPAGE_1250 is not set
    # CONFIG_NLS_CODEPAGE_1251 is not set
    CONFIG_NLS_ISO8859_1=m
    # CONFIG_NLS_ISO8859_2 is not set
    # CONFIG_NLS_ISO8859_3 is not set
    # CONFIG_NLS_ISO8859_4 is not set
    # CONFIG_NLS_ISO8859_5 is not set
    # CONFIG_NLS_ISO8859_6 is not set
    # CONFIG_NLS_ISO8859_7 is not set
    # CONFIG_NLS_ISO8859_9 is not set
    # CONFIG_NLS_ISO8859_13 is not set
    # CONFIG_NLS_ISO8859_14 is not set
    CONFIG_NLS_ISO8859_15=m
    # CONFIG_NLS_KOI8_R is not set
    # CONFIG_NLS_KOI8_U is not set
    # CONFIG_NLS_UTF8 is not set

    #
    # Profiling support
    #
    # CONFIG_PROFILING is not set

    #
    # Kernel hacking
    #
    CONFIG_DEBUG_KERNEL=y
    # CONFIG_DEBUG_STACKOVERFLOW is not set
    # CONFIG_DEBUG_SLAB is not set
    # CONFIG_DEBUG_IOVIRT is not set
    CONFIG_MAGIC_SYSRQ=y
    # CONFIG_DEBUG_SPINLOCK is not set
    # CONFIG_DEBUG_PAGEALLOC is not set
    # CONFIG_SPINLINE is not set
    # CONFIG_DEBUG_INFO is not set
    # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
    # CONFIG_KGDB is not set
    # CONFIG_FRAME_POINTER is not set
    CONFIG_X86_EXTRA_IRQS=y
    CONFIG_X86_FIND_SMP_CONFIG=y
    CONFIG_X86_MPPARSE=y
    CONFIG_KMSGDUMP=y
    CONFIG_KMSGDUMP_FAT=y
    CONFIG_KMSGDUMP_AUTO=y
    # CONFIG_KMSGDUMP_SAFE is not set

    #
    # Security options
    #
    # CONFIG_SECURITY is not set

    #
    # Cryptographic options
    #
    CONFIG_CRYPTO=y
    CONFIG_CRYPTO_HMAC=y
    CONFIG_CRYPTO_NULL=m
    CONFIG_CRYPTO_MD4=m
    CONFIG_CRYPTO_MD5=m
    CONFIG_CRYPTO_SHA1=m
    CONFIG_CRYPTO_SHA256=m
    CONFIG_CRYPTO_SHA512=m
    CONFIG_CRYPTO_DES=m
    CONFIG_CRYPTO_BLOWFISH=m
    CONFIG_CRYPTO_TWOFISH=m
    CONFIG_CRYPTO_SERPENT=m
    CONFIG_CRYPTO_AES=m
    CONFIG_CRYPTO_CAST5=m
    CONFIG_CRYPTO_CAST6=m
    CONFIG_CRYPTO_DEFLATE=m
    CONFIG_CRYPTO_TEST=m

    #
    # Library routines
    #
    CONFIG_CRC32=y
    CONFIG_ZLIB_INFLATE=m
    CONFIG_ZLIB_DEFLATE=m
    CONFIG_X86_BIOS_REBOOT=y
    CONFIG_PC=y
    Module Size Used by
    sch_ingress 3012 1
    cls_u32 6532 7
    sch_sfq 4480 3
    sch_htb 22208 1
    ip_conntrack_ftp 71092 0
    ipt_MASQUERADE 2816 2
    iptable_mangle 2112 0
    iptable_nat 19500 2 ipt_MASQUERADE
    ipt_REJECT 5312 8
    ipt_limit 1856 29
    ipt_state 1472 4
    ip_conntrack 27248 4 ip_conntrack_ftp,ipt_MASQUERADE,iptable_nat,ipt_state
    ipt_LOG 4928 15
    ipt_ULOG 5672 12
    iptable_filter 2176 1
    ip_tables 15616 9 ipt_MASQUERADE,iptable_mangle,iptable_nat,ipt_REJECT,ipt_limit,ipt_state,ipt_LOG,ipt_ULOG,iptable_filter
    binfmt_misc 8072 1
    af_packet 17032 2
    snd_seq_oss 32000 0
    snd_seq_midi_event 6272 1 snd_seq_oss
    snd_seq 51600 4 snd_seq_oss,snd_seq_midi_event
    snd_pcm_oss 48164 0
    snd_mixer_oss 16768 1 snd_pcm_oss
    snd_via82xx 21792 0
    snd_pcm 85668 2 snd_pcm_oss,snd_via82xx
    snd_timer 21572 2 snd_seq,snd_pcm
    snd_ac97_codec 51716 1 snd_via82xx
    snd_page_alloc 8964 2 snd_via82xx,snd_pcm
    snd_mpu401_uart 6016 1 snd_via82xx
    snd_rawmidi 20384 1 snd_mpu401_uart
    snd_seq_device 6600 3 snd_seq_oss,snd_seq,snd_rawmidi
    snd 43492 12 snd_seq_oss,snd_seq_midi_event,snd_seq,snd_pcm_oss,snd_mixer_oss,snd_via82xx,snd_pcm,snd_timer,snd_ac97_codec,snd_mpu401_uart,snd_rawmidi,snd_seq_device
    soundcore 7168 1 snd
    speedtch 12848 1
    clip 13668 1
    uhci_hcd 29584 0
    ehci_hcd 21764 0
    usbcore 97244 5 speedtch,uhci_hcd,ehci_hcd
    isofs 31544 0
    zlib_inflate 21184 1 isofs
    nls_cp437 5376 1
    vfat 12672 1
    fat 40512 1 vfat
    nls_iso8859_1 3776 2
    ntfs 96364 1
    \
     
     \ /
      Last update: 2005-03-22 13:58    [W:7.273 / U:0.016 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site