lkml.org 
[lkml]   [2003]   [Oct]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: Oops linux 2.4.23-pre6 on amd64
Andi Kleen wrote:
>
> Can you load the module whatever it is manually and then decode
> the oops while it's still loaded? Or better compile in all USB
> statically and see if it oopses too.

Oops, scratch that last one... It's invalid too as I used the original
oops rather than the new one. This one's the right one (honest!).

Tony
ksymoops 2.4.9 on x86_64 2.4.23-pre6-amd64. Options used
-V (default)
-k /proc/ksyms (default)
-l /proc/modules (default)
-o /lib/modules/2.4.23-pre6-amd64/ (default)
-m /boot/System.map-2.4.23-pre6-amd64 (default)

Warning: You did not tell me where to find symbol information. I will
assume that the log matches the kernel and modules that are running
right now and I'll use the default options above for symbol resolution.
If the current kernel and/or modules do not match the log, you can get
more accurate output by telling me the kernel version and where to find
map, modules, ksyms etc. ksymoops -h explains the options.

Unable to handle kernel paging request<1> at 00000000a000a700 RIP: [<00000000a000a700>]PML4 3f145067 PGD 0
Oops: 0010
CPU 0
Pid: 146, comm: modprobe.moduti Not tainted
RIP: 0010:[<00000000a000a700>]
Using defaults from ksymoops -t elf32-i386 -a i386
RSP: 0000:000001003f165de0 EFLAGS: 00010246
RAX: ffffffffa00220e0 RBX: ffffffffa0022560 RCX: 0000000000000007
RDX: ffffffffa00220e0 RSI: ffffffffa00220e0 RDI: 000001000262f800
RBP: 000001000262f800 R08: 0000000000000001 R09: ffffffffa00224e0
R10: ffffffffa0021fa0 R11: 0000000000000000 R12: ffffffffa00220e0
R13: 0000000000000000 R14: ffffff0000a11000 R15: 0000010002767c00
FS: 0000000000000000(0000) GS:ffffffff8034b540(0000) knlGS:0000000000000000
CS: 0010 DS: 002b ES: 002b CR0: 000000008005003b
CR2: 00000000a000a700 CR3: 0000000000101000 CR4: 00000000000006e0
Process modprobe.moduti (pid: 146, stackpage=1003f165000)
Stack: 000001003f165de0 0000000000000000 ffffffff80202fce 0000000000000007
000001000262f800 ffffffffa0022560 0000000000000000 00000000000000b8
ffffffff80203048 ffffffffffffffea ffffffffa001e000 0000000008088758
Call Trace: [<ffffffff80202fce>] [<ffffffffa0022560>]
[<ffffffff80203048>] [<ffffffffa0021f4d>] [<ffffffff8012008e>]
[<ffffffff8012e21c>] [<ffffffffa001e0b8>] [<ffffffff80189963>]
Code: Bad RIP value.
CR2: 00000000a000a700
Warning (Oops_read): Code line not seen, dumping what data is available


>>EIP; a000a700 Before first symbol <=====

>>RAX; ffffffffa00220e0 <[ehci-hcd]pci_ids+0/40>
>>RBX; ffffffffa0022560 <[ehci-hcd]ehci_pci_driver+0/4f>
>>RDX; ffffffffa00220e0 <[ehci-hcd]pci_ids+0/40>
>>RSI; ffffffffa00220e0 <[ehci-hcd]pci_ids+0/40>
>>R09; ffffffffa00224e0 <[ehci-hcd].rodata.end+3b9/419>
>>R10; ffffffffa0021fa0 <[ehci-hcd]__module_kernel_version+0/0>
>>R12; ffffffffa00220e0 <[ehci-hcd]pci_ids+0/40>

Trace; ffffffff80202fce <pci_announce_device+3e/60>
Trace; ffffffffa0022560 <[ehci-hcd]ehci_pci_driver+0/4f>
Trace; ffffffff80203048 <pci_register_driver+58/80>
Trace; ffffffffa0021f4d <[ehci-hcd]init+d/40>
Trace; ffffffff8012008e <sys_init_module+62e/6f0>
Trace; ffffffff8012e21c <handle_mm_fault+bc/180>
Trace; ffffffffa001e0b8 <[keybdev].data.end+919/921>
Trace; ffffffff80189963 <ia32_syscall+67/71>


2 warnings issued. Results may not be reliable.
\
 
 \ /
  Last update: 2005-03-22 13:49    [W:0.120 / U:0.052 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site