Messages in this thread | | | Date | Fri, 17 Oct 2003 11:49:11 +0100 | From | John Bradford <> | Subject | Re: Blockbusting news, this is important (Re: Why are bad disk sectors numbered strangely, and what happens to them?) |
| |
Quote from Rogier Wolff <R.E.Wolff@BitWizard.nl>: > On Fri, Oct 17, 2003 at 06:40:01PM +0900, Norman Diamond wrote: > > I explained to them why the LBA sector number should still get > > reallocated even though the data are lost. > > This is unbelievably bad: Sometimes it is worth it, to try and read > the block again and again. We've seen blocks getting read after we've > retried over 1000 times from "userspace". That doesn't include the > retries that the drive did for us "behind the scenes".
That's moving in to the realms of more advanced data recovery. You shouldn't really expect to be able to do those kind of forensics on intellegent drives using standard filesystem system calls.
Besides, are you positive that you always got the correct data off the disk? See the discussions about hashing algorithms - maybe the drive simply returned data that had an additional bit flipped and wasn't identified as bad. If you are having to try over 1000 times from userspace, the drive is in a bad way. You shouldn't really make assumptions that you do usually, (that the error correction is good enough to ensure bad data isn't returned as good data). If you are recovering data from a spreadsheet, for example, the errors could go unnoticed, but have catastrophic results.
> If you manage to convince Toshiba to remap the sector on a "bad read", > we'll never ever be able to recover the sector.
Of course you will - it's remapped, the data isn't overwritten! You may need more advanced tools, but you can still seek the heads to that part of the platter and get data from the head-amp. Just because you couldn't use your simple method anymore is real reason to argue against fixing the problem.
> We've also been able to provide a different environment (e.g. other > ambient temperature) to a drive so that previously bad sectors could > be read. > > No, the only way is to realloc on write.
This may be more sensible, but not for the reasons you are suggesting, and not in the way that you are suggesting. I have nothing really against not re-allocating on read, although ideally, it should be an option, but marking the sector as "don't touch, don't even re-map in case we confuse the OS", after a bad read is NOT acceptable in my opinion.
In any case, a S.M.A.R.T. test should remap all suspect sectors - if an admin has deliberately run a S.M.A.R.T. test, I think we can assume they know what they are doing.
> (but it should remember that > the data was bad, and treat the physical area with extra caution. It's > possible that something happened while writing that sector, so that > rewriting it this time will fix the problem for good, but on the other > hand, that area of the drive demonstrated the abilitty to lose data, > so you shouldn't trust any data to it!)
Suspect drive? Bin it. Do you really not value your data enough to do that?
John. - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |