Messages in this thread | ![/](/images/icornerl.gif) | | From | Rudmer van Dijk <> | Subject | Re: Status of ide-cdrom writing? | Date | Sun, 19 Jan 2003 18:15:10 +0100 |
| |
On Sunday 19 January 2003 16:24, Gregoire Favre wrote: > On Sun, Jan 19, 2003 at 03:00:44PM +0000, Paul E. Erkkila wrote: > > > I can confirm it worked this morning with 2.5.58. > > > > cdrecord --version > > Cdrecord 2.0 (i686-pc-linux-gnu) Copyright (C) 1995-2002 Jörg Schilling > > > > uname -a > > Linux nipplehead 2.5.58 #77 Thu Jan 16 02:57:13 GMT 2003 i686 AMD > > Athlon(TM) XP2000+ AuthenticAMD GNU/Linux > > > > I do know vcdxrip hasn't worked since 2.5.42 or so. > > > > This is a 1/2 gentoo, 1/2 my fault box. > > Well, lots of people have CD-writer working, as you don't tell which > unit you have, I don't know wheter it's a CD or a DVD writer one??? > > And are you really not using ide-scsi? > > Is there anybody which has success with DVD-writer under 2.5.59 without > ide-scsi?
yep:
Calling: /usr/lib/xcdroast-0.98/bin/xcdrwrap CDRECORD dev= "/dev/hdc" fs=4096k -v driveropts=burnfree speed=16 -eject -pad tsize=14928s -
scsidev: '/dev/hdc' devname: '/dev/hdc' scsibus: -2 target: -2 lun: -2 Warning: Open by 'devname' is unintentional and not supported. Linux sg driver version: 3.5.27 Cdrecord 1.11a40 (i686-pc-linux-gnu) Copyright (C) 1995-2002 Jörg Schilling TOC Type: 1 = CD-ROM Using libscg version 'schily-0.7' Driveropts: 'burnfree' atapi: 1 Device type : Removable CD-ROM Version : 2 Response Format: 2 Capabilities : Vendor_info : 'HL-DT-ST' Identifikation : 'CD-RW GCE-8240B ' Revision : '1.06' Device seems to be: Generic mmc CD-RW. Using generic SCSI-3/mmc CD-R driver (mmc_cdr). Driver flags : MMC-3 SWABAUDIO BURNFREE Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R Drive buf size : 6037504 = 5896 KB FIFO size : 4194304 = 4096 KB Track 01: data 29 MB padsize: 30 KB Total size: 33 MB (03:19.26) = 14945 sectors Lout start: 33 MB (03:21/20) = 14945 sectors Current Secsize: 2048 ATIP info from disk: Indicated writing power: 2 Reference speed: 6 Is not unrestricted Is erasable Disk sub type: High speed Rewritable (CAV) media (1) ATIP start of lead in: -11077 (97:34/23) ATIP start of lead out: 336075 (74:43/00) 1T speed low: 4 1T speed high: 10 power mult factor: 2 6 recommended erase/write power: 5 A1 values: 24 2C DC A2 values: 00 00 00 Disk type: Phase change Manuf. index: 11 Manufacturer: Mitsubishi Chemical Corporation Blocks total: 336075 Blocks current: 336075 Blocks remaining: 321130 Starting to write CD/DVD at speed 10 in real TAO mode for single session. 0 seconds. Operation starts. Waiting for reader process to fill input buffer ... input buffer ready. BURN-Free is ON. Performing OPC... Starting new track at sector: 0
Track 01: writing 30 KB of pad data. Track 01: Total bytes read/written: 30572544/30603264 (14943 sectors). Writing time: 27.663s Average write speed 7.2x. Min drive buffer fill was 99% Fixating... Fixating time: 25.951s
to check that it really worked:
rudmer:~ # mount /mnt/cdrom/ rudmer:~ # ls /mnt/cdrom/ test_file_for_burning rudmer:~ # cmp test_file_for_burning /mnt/cdrom/test_file_for_burning rudmer:~ #
so it works for me(TM)...
Rudmer - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| ![\](/images/icornerr.gif) |