Messages in this thread | | | From | Denis Vlasenko <> | Subject | Re: Oops with usb-mass-storage | Date | Fri, 10 Jan 2003 14:09:15 +0200 |
| |
On 9 January 2003 18:50, Chrissie wrote: > Now, i get the following output in dmesg after switching the camera > on: hub.c: connect-debounce failed, port 2 disabled > hub.c: new USB device 00:07.2-2, assigned address 2 > scsi1 : SCSI emulation for USB Mass Storage devices > Vendor: Model: Rev: > Type: Direct-Access ANSI SCSI revision: 02 > WARNING: USB Mass Storage data integrity not assured > USB Mass Storage device found at 2 > > Looks quite good, i think. > > chrissie@balearen:~$ cat /proc/scsi/scsi > Attached devices: > Host: scsi0 Channel: 00 Id: 00 Lun: 00 > Vendor: LITEON Model: CD-ROM LTN301 Rev: ML35 > Type: CD-ROM ANSI SCSI revision: 02 > Host: scsi0 Channel: 00 Id: 01 Lun: 00 > Vendor: Model: CD-R/RW RW7120A Rev: 1.10 > Type: CD-ROM ANSI SCSI revision: 02 > Host: scsi1 Channel: 00 Id: 00 Lun: 00 > Vendor: DSC Model: Card Reader Rev: . > Type: Direct-Access ANSI SCSI revision: 02 > > The device now seems to be recogniced, and the usb-storage-to-scsi > seems to work as well. > > I was very happy so far. But when i enter the following: > > root@balearen:~# mount /dev/sda1 /mnt -t vfat > > i get an kernel oops after following additional output to the console
An oops? This is *the* first oops, please decode and post it to USB folks. Subsequent oopses are of much less help... -- vda - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |