Messages in this thread | | | Date | Thu, 8 Aug 2002 15:47:18 +0300 (EEST) | From | Pasi Kärkkäinen <> | Subject | Re: forcing the tg3 into full duplex |
| |
On 8 Aug 2002, Frederik Dannemare wrote:
> Hi, > > anybody knows how to do this? > > I was hoping to be able to set an option like "full_duplex=1" or > something when loading the module, but this doesn't work. Also doing a > "modinfo tg3" tells me there's only a debug parm (tg3_debug) for the > module. > > Machine: Dell PowerEdge 2650 > OS/kernel: SuSE 8 with standard kernel (2.4.18-64GB-SMP) > > /var/log/messages output: > Aug 8 15:38:08 serv100 kernel: tg3.c:v0.97 (Mar 13, 2002) > Aug 8 15:38:08 serv100 kernel: eth0: Tigon3 [partno(BCM95701A10) rev > 0105 PHY(5701)] (PCIX:133MHz:64-bit) 10/100/1000BaseT E > thernet 00:06:5b:3e:46:e2 > Aug 8 15:38:08 serv100 kernel: eth1: Tigon3 [partno(BCM95701A10) rev > 0105 PHY(5701)] (PCIX:133MHz:64-bit) 10/100/1000BaseT E > thernet 00:06:5b:3e:46:e3 > Aug 8 15:38:08 serv100 kernel: eth0: Link is up at 100 Mbps, half > duplex. > Aug 8 15:38:08 serv100 kernel: eth0: Flow control is off for TX and off > for RX. > > I also tried mii-tool on the interface which reports this: > SIOCGMIIPHY on 'eth0' failed: Operation not supported > > > Please let me know if more info from my part is needed for > troubleshooting. Many thanks in advance. >
I think tigon3-driver supports ethtool. Try it.
- Pasi Kärkkäinen
^ . . Linux / - \ Choice.of.the .Next.Generation.
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |