lkml.org 
[lkml]   [2002]   [Aug]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: RFC: PCI hotplug resource reservation
On Wed, 7 Aug 2002, David Woodhouse wrote:

>
> scottm@somanetworks.com said:
> > However, it's entirely possible that you will be allocated resource
> > ranges that are intermingled with the ranges that are behind other
> > bridges or devices. There's no sane way to program the hotplug
> > bridge's BARs in such a situation.
>
> Why? Can't you just forward transactions for the whole of the range,
> including some addresses which are actually behind other bridges?

My copy of "PCI System Architecture, 4th Edition", say on the top of
page 379:

On power-up, the system must be automatically configured so that each
device's IO and memory functions occupy mutually-exclusive address
ranges.

There's no detail on what happens if you violate this, however. Digging
out the "PCI Local Bus Specification, Revision 2.2", section 3.2.2 (page
27) says:

When a transaction is initiated on the interface, each potential target
compares the address with its Base Address register(s) to determine if
it is the target of the current transaction. If it is the target, the
device asserts DEVSEL# to claim the access. For more details about
DEVSEL# generation, refer to Section 3.6.1.

May take on that, as well as a quick read of section 3.6.1, is that
multiple targets claiming an address results in undefined behaviour,
since no mechanisms for handling that are defined in the spec.

Scott


--
Scott Murray
SOMA Networks, Inc.
Toronto, Ontario
e-mail: scottm@somanetworks.com


-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:27    [W:1.476 / U:0.012 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site