lkml.org 
[lkml]   [2002]   [Jun]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: NAPI for eepro100
On Wed, 12 Jun 2002, David S. Miller wrote:
> From: Jeff Garzik <jgarzik@mandrakesoft.com>
> Oh crap, you're right... eepro100 in general does funky stuff with the
> way packets are handled, mainly due to the need to issue commands to the
> NIC engine instead of the normal per-descriptor owner bit way of doing
> things.

The eepro100 has a unique design in many different aspects.

> The question is, do the descriptor bits have to live right before
> the RX packet data buffer or can other schemes be used?

With the current driver structure, yes, the descriptor words must be
immediately before the packet data. You can use other Rx and Tx
structures/modes to avoid this, but they use less efficient memory access.
For instance, the current Tx structure allows transmitting a packet with
a single PCI burst, rather than multiple transfers.


--
Donald Becker becker@scyld.com
Scyld Computing Corporation http://www.scyld.com
410 Severn Ave. Suite 210 Second Generation Beowulf Clusters
Annapolis MD 21403 410-990-9993

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:26    [W:0.030 / U:1.824 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site