This message generated a parse failure. Raw output follows here. Please use 'back' to navigate. From devnull@lkml.org Tue Jun 4 19:36:05 2024 Received: from spaans.ds9a.nl (adsl-xs4all.ds9a.nl [213.84.159.51]) by kylie.puddingonline.com (8.11.6/8.11.6) with SMTP id g8IK3nX20599 for ; Wed, 18 Sep 2002 22:03:51 +0200 Received: (qmail 21260 invoked from network); 18 Sep 2002 07:48:10 -0000 Received: from unknown (HELO spaans.ds9a.nl) (3ffe:8280:10:360:202:44ff:fe2a:a1dd) by mayo.ipv6.ds9a.nl with SMTP; 18 Sep 2002 07:48:10 -0000 Received: (qmail 4226 invoked by uid 1000); 17 Sep 2002 21:23:08 -0000 Received: (maildatabase); juh Received: (qmail 2363 invoked by alias); 14 Mar 2002 16:34:01 -0000 Received: (qmail 2357 invoked from network); 14 Mar 2002 16:34:01 -0000 Received: from unknown (HELO dipsaus.ds9a.tudelft.nl) (::ffff:10.0.0.202) by spaans.ds9a.nl with SMTP; 14 Mar 2002 16:34:01 -0000 Received: (qmail 25956 invoked from network); 14 Mar 2002 16:34:00 -0000 Received: from unknown (HELO vger.kernel.org) (::ffff:12.107.208.194) by adsl-xs4all.ds9a.nl with SMTP; 14 Mar 2002 16:34:00 -0000 Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id ; Thu, 14 Mar 2002 11:29:47 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id ; Thu, 14 Mar 2002 11:29:42 -0500 Received: from angband.namesys.com ([212.16.7.85]:15489 "HELO angband.namesys.com") by vger.kernel.org with SMTP id ; Thu, 14 Mar 2002 11:29:23 -0500 Received: by angband.namesys.com (Postfix on SuSE Linux 7.3 (i386), from userid 501) id D52FB3C3530; Thu, 14 Mar 2002 19:29:16 +0300 (MSK) Date: Thu, 14 Mar 2002 19:29:16 +0300 From: Oleg Drokin To: Alex Walker Cc: linux-kernel@vger.kernel.org Subject: Re: Oops in 2.5.6 and 2.5.7-pre1 - reiserfs? Message-Id: <20020314192916.A1929@namesys.com> References: <20020314162009.F9664@x3ja.co.uk> Mime-Version: 1.0 Content-Type: multipart/mixed; boundary="HcAYCG3uE/tztfnV" Content-Disposition: inline In-Reply-To: <20020314162009.F9664@x3ja.co.uk> User-Agent: Mutt/1.3.22.1i Sender: linux-kernel-owner@vger.kernel.org Precedence: bulk X-Mailing-List: linux-kernel@vger.kernel.org X-Spam-Status: No, hits=-10.0 required=5.0 tests=SUBJ_ENDS_IN_Q_MARK,IN_REP_TO,UNIFIED_PATCH version=2.11 Lines: 570 --HcAYCG3uE/tztfnV Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Content-Transfer-Encoding: quoted-printable Hello! =20 Try the patch attached. Bye, Oleg On Thu, Mar 14, 2002 at 04:20:09PM +0000, Alex Walker wrote: > Please CC me in replies to this - I'm not on the list. >=20 > I am using the 2.5 series on a couple of machine (mainly because they > now have ALSA and preempt in) and one is running fine, the other oopses > on boot to 2.5.6 or 2.5.7-pre1. >=20 > I think the problem is from reiserfs somewhere. Attached are the > ksymoops interpretations of the two Oops (which seem virtually > identical), and also the kernel logs of boot to both kernels. >=20 > I have reiserfs on my root partition, and it is in the 3.5 format > (haven't got found out how to convert to 3.6) which may be significant. > All other partitions are in the 3.6 format. >=20 > The last known working 2.5 kernel for me is 2.5.6-pre1. >=20 > If you want any more information, please let me know. >=20 > Cheers, >=20 > Alex >=20 > --=20 > ALEX|X3JA > alex@x3ja.co.uk > ICQ: 1523424 > ksymoops 2.4.3 on i686 2.5.6-pre1. Options used > -V (default) > -K (specified) > -L (specified) > -o /lib/modules/2.5.6 (specified) > -m /boot/System.map-2.5.6 (specified) >=20 > No modules in ksyms, skipping objects > cpu: 0, clocks: 1328955, slice: 664477 > Unable to handle kernel NULL pointer dereference at virtual address 00000= 010 > c0135f3e > *pde =3D 00000000 > Oops: 0000 > CPU: 0 > EIP: 0010:[] Not tainted > Using defaults from ksymoops -t elf32-i386 -a i386 > EFLAGS: 00010286 > eax: 00001000 ebx: 0000000e ecx: 00000008 edx: 00002012 > esi: 00000008 edi: 00002012 ebp: 00000000 esp: c13edd64 > ds: 0018 es: 0018 ss: 0018 > Stack: 00001000 00002012 00000000 d3d09c00 d3d09c00 c01365e8 00000000 000= 02012=20 > 00001000 d3d09c00 d4834000 d48453ec c01367ef 00000000 00002012 000= 01000=20 > d3d09c00 c01b2196 00000000 00002012 00001000 00000306 00000000 d3d= 09d54=20 > Call Trace: [] [] [] [] []=20 > [] [] [] [] [] []=20 > [] [] [] [] [] []=20 > []=20 > Code: 0f b7 45 10 b0 00 66 0f b6 55 10 01 d0 0f b7 c0 89 44 24 10=20 >=20 > >>EIP; c0135f3e <__get_hash_table+1a/bc> <=3D=3D=3D=3D=3D > Trace; c01365e8 <__getblk+1c/40> > Trace; c01367ee <__bread+16/70> > Trace; c01b2196 > Trace; c0135710 <__wait_on_buffer+84/90> > Trace; c01a4808 > Trace; c01a50cc > Trace; c01bbe0c > Trace; c0139f7e > Trace; c01a54ae > Trace; c01a4fa8 > Trace; c013a136 > Trace; c014aa98 > Trace; c014ad70 > Trace; c014abb4 > Trace; c014b190 > Trace; c0105258 > Trace; c0105072 > Trace; c01055fc > Code; c0135f3e <__get_hash_table+1a/bc> > 00000000 <_EIP>: > Code; c0135f3e <__get_hash_table+1a/bc> <=3D=3D=3D=3D=3D > 0: 0f b7 45 10 movzwl 0x10(%ebp),%eax <=3D=3D=3D=3D= =3D > Code; c0135f42 <__get_hash_table+1e/bc> > 4: b0 00 mov $0x0,%al > Code; c0135f44 <__get_hash_table+20/bc> > 6: 66 0f b6 55 10 movzbw 0x10(%ebp),%dx > Code; c0135f48 <__get_hash_table+24/bc> > b: 01 d0 add %edx,%eax > Code; c0135f4a <__get_hash_table+26/bc> > d: 0f b7 c0 movzwl %ax,%eax > Code; c0135f4e <__get_hash_table+2a/bc> > 10: 89 44 24 10 mov %eax,0x10(%esp,1) >=20 > <0>Kernel panic: Attempted to kill init! > ksymoops 2.4.3 on i686 2.5.6-pre1. Options used > -V (default) > -K (specified) > -L (specified) > -o /lib/modules/2.5.7-pre1/ (specified) > -m /boot/System.map-2.5.7-pre1 (specified) >=20 > No modules in ksyms, skipping objects > cpu: 0, clocks: 1328955, slice: 664477 > Unable to handle kernel NULL pointer dereference at virtual address 00000= 010 > c01362de > *pde =3D 00000000 > Oops: 0000 > CPU: 0 > EIP: 0010:[] Not tainted > Using defaults from ksymoops -t elf32-i386 -a i386 > EFLAGS: 00010292 > eax: 00001000 ebx: 0000000e ecx: 00000008 edx: 00002012 > esi: 00000008 edi: 00002012 ebp: 00000000 esp: c13edd6c > ds: 0018 es: 0018 ss: 0018 > Stack: 00001000 00002012 00000000 d3d09c00 d3d09c00 c0136988 00000000 000= 02012=20 > 00001000 d3d09c00 d4834000 d48453ec c0136b8f 00000000 00002012 000= 01000=20 > d3d09c00 c01b26f6 00000000 00002012 00001000 00000306 00000000 d3d= 09d54=20 > Call Trace: [] [] [] [] []=20 > [] [] [] [] [] []=20 > [] [] [] [] [] []=20 > [] []=20 > Code: 0f b7 45 10 b0 00 66 0f b6 55 10 01 d0 0f b7 c0 89 44 24 10=20 >=20 > >>EIP; c01362de <__get_hash_table+1a/bc> <=3D=3D=3D=3D=3D > Trace; c0136988 <__getblk+1c/40> > Trace; c0136b8e <__bread+16/70> > Trace; c01b26f6 > Trace; c0135ab0 <__wait_on_buffer+84/90> > Trace; c01a4d68 > Trace; c01a562c > Trace; c01bc36c > Trace; c013b638 > Trace; c013a310 > Trace; c01a5a0e > Trace; c01a5508 > Trace; c013a4e0 > Trace; c014ae58 > Trace; c014b130 > Trace; c014af74 > Trace; c014b550 > Trace; c0105258 > Trace; c0105072 > Trace; c01055fc > Code; c01362de <__get_hash_table+1a/bc> > 00000000 <_EIP>: > Code; c01362de <__get_hash_table+1a/bc> <=3D=3D=3D=3D=3D > 0: 0f b7 45 10 movzwl 0x10(%ebp),%eax <=3D=3D=3D=3D= =3D > Code; c01362e2 <__get_hash_table+1e/bc> > 4: b0 00 mov $0x0,%al > Code; c01362e4 <__get_hash_table+20/bc> > 6: 66 0f b6 55 10 movzbw 0x10(%ebp),%dx > Code; c01362e8 <__get_hash_table+24/bc> > b: 01 d0 add %edx,%eax > Code; c01362ea <__get_hash_table+26/bc> > d: 0f b7 c0 movzwl %ax,%eax > Code; c01362ee <__get_hash_table+2a/bc> > 10: 89 44 24 10 mov %eax,0x10(%esp,1) >=20 > <0>Kernel panic: Attempted to kill init! >=20 > Loading 2.5.6................... > s=08 =08Linux version 2.5.6 (alex@numbers) (gcc version 2.95.4 20011002 (= Debian prerelease)) #3 Thu Mar 14 14:48:28 GMT 2002 > BIOS-provided physical RAM map: > BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) > BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) > BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) > BIOS-e820: 0000000000100000 - 0000000013fc0000 (usable) > BIOS-e820: 0000000013fc0000 - 0000000013ff8000 (ACPI data) > BIOS-e820: 0000000013ff8000 - 0000000014000000 (ACPI NVS) > BIOS-e820: 00000000ffb80000 - 00000000ffc00000 (reserved) > BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) > 319MB LOWMEM available. > On node 0 totalpages: 81856 > zone(0): 4096 pages. > zone(1): 77760 pages. > zone(2): 0 pages. > Kernel command line: BOOT_IMAGE=3D2.5.6 ro root=3D306 console=3DttyS0,960= 0n8 console=3Dtty0 > Local APIC disabled by BIOS -- reenabling. > Found and enabled local APIC! > Initializing CPU#0 > Detected 930.255 MHz processor. > Console: colour VGA+ 80x25 > Calibrating delay loop... 1854.66 BogoMIPS > Memory: 321084k/327424k available (1470k kernel code, 5952k reserved, 474= k data, 208k init, 0k highmem) > Dentry-cache hash table entries: 65536 (order: 7, 524288 bytes) > Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) > Mount-cache hash table entries: 512 (order: 0, 4096 bytes) > Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes) > Page-cache hash table entries: 131072 (order: 7, 524288 bytes) > CPU: L1 I cache: 16K, L1 D cache: 16K > CPU: L2 cache: 256K > Intel machine check architecture supported. > Intel machine check reporting enabled on CPU#0. > CPU: Intel Pentium III (Coppermine) stepping 06 > Enabling fast FPU save and restore... done. > Enabling unmasked SIMD FPU exception support... done. > Checking 'hlt' instruction... OK. > POSIX conformance testing by UNIFIX > enabled ExtINT on CPU#0 > ESR value before enabling vector: 00000000 > ESR value after enabling vector: 00000000 > Using local APIC timer interrupts. > calibrating APIC timer ... > ..... CPU clock speed is 930.2691 MHz. > ..... host bus clock speed is 132.8955 MHz. > cpu: 0, clocks: 1328955, slice: 664477 > CPU0 > mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) > mtrr: detected mtrr type: Intel > Linux NET4.0 for Linux 2.4 > Based upon Swansea University Computer Society NET3.039 > Initializing RT netlink socket > PCI: PCI BIOS revision 2.10 entry at 0xfda95, last bus=3D2 > PCI: Using configuration type 1 > PCI: Probing PCI hardware > Unknown bridge resource 0: assuming transparent > PCI: Discovered primary peer bus 08 [IRQ] > PCI: Using IRQ router PIIX [8086/2440] at 00:1f.0 > Starting kswapd > BIO: pool of 256 setup, 14Kb (56 bytes/bio) > biovec: init pool 0, 1 entries, 12 bytes > biovec: init pool 1, 4 entries, 48 bytes > biovec: init pool 2, 16 entries, 192 bytes > biovec: init pool 3, 64 entries, 768 bytes > biovec: init pool 4, 128 entries, 1536 bytes > biovec: init pool 5, 256 entries, 3072 bytes > Journalled Block Device driver loaded > Installing knfsd (copyright (C) 1996 okir@monad.swb.de). > ACPI: Core Subsystem version [20011018] > ACPI: Subsystem enabled > Power Resource: found > Power Resource: found > Power Resource: found > Power Resource: found > ACPI: System firmware supports S0 S1 S4 S5 > Processor[0]: C0 C1 > ACPI: Power Button (FF) found > ACPI: Sleep Button (CM) found > pty: 256 Unix98 ptys configured > Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL= _PCI enabled > ttyS00 at 0x03f8 (irq =3D 4) is a 16550A > Real Time Clock Driver v1.11 > block: 256 slots per queue, batch=3D32 > Linux video capture interface: v1.00 > Linux agpgart interface v0.99 (c) Jeff Hartmann > agpgart: Maximum main memory to use for agp memory: 262M > agpgart: Detected Intel i815 chipset > agpgart: AGP aperture is 64M @ 0xf8000000 > Uniform Multi-Platform E-IDE driver ver.:7.0.0 > ide: system bus speed 33MHz > Intel Corp. 82820 820 (Camino 2) Chipset IDE U100: IDE controller on PCI = slot 00:1f.1 > Intel Corp. 82820 820 (Camino 2) Chipset IDE U100: chipset revision 2 > Intel Corp. 82820 820 (Camino 2) Chipset IDE U100: not 100% native mode: = will probe irqs later > ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:DMA > ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio > hda: QUANTUM FIREBALLlct20 20, ATA DISK drive > hdb: SAMSUNG SV2044D, ATA DISK drive > hdc: MATSHITADVD-ROM SR-8586, ATAPI CD/DVD-ROM drive > ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 > ide1 at 0x170-0x177,0x376 on irq 15 > blk: queue c034dbac, I/O limit 4095Mb (mask 0xffffffff) > hda: 39876480 sectors (20417 MB) w/418KiB Cache, CHS=3D39560/16/63, UDMA(= 33) > blk: queue c034ddcc, I/O limit 4095Mb (mask 0xffffffff) > hdb: 39862368 sectors (20410 MB) w/472KiB Cache, CHS=3D39546/16/63, UDMA(= 66) > Partition check: > hda: [PTBL] [2482/255/63] hda1 hda3 < hda5 hda6 hda7 hda8 hda9 hda10 hda= 11 hda12 hda13 > > hdb: hdb1 hdb2 hdb3 < hdb5 hdb6 hdb7 hdb8 hdb9 hdb10 > > usb.c: registered new driver usbfs > usb.c: registered new driver hub > uhci.c: USB Universal Host Controller Interface driver v1.1 > PCI: Found IRQ 3 for device 00:1f.2 > PCI: Setting latency timer of device 00:1f.2 to 64 > uhci.c: USB UHCI at I/O 0xef40, IRQ 3 > hcd.c: new USB bus registered, assigned bus number 1 > hub.c: USB hub found at / > hub.c: 2 ports detected > PCI: Found IRQ 9 for device 00:1f.4 > PCI: Setting latency timer of device 00:1f.4 to 64 > uhci.c: USB UHCI at I/O 0xef80, IRQ 9 > hcd.c: new USB bus registered, assigned bus number 2 > hub.c: USB hub found at / > hub.c: 2 ports detected > usb.c: registered new driver hid > hid-core.c: v1.31:USB HID core driver > mice: PS/2 mouse device common for all mice > NET4: Linux TCP/IP 1.0 for NET4.0 > IP Protocols: ICMP, UDP, TCP, IGMP > IP: routing cache hash table of 2048 buckets, 16Kbytes > TCP: Hash tables configured (established 32768 bind 32768) > ip_conntrack (2558 buckets, 20464 max) > ip_tables: (C) 2000-2002 Netfilter core team > NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. > found reiserfs format "3.5" with standard journal > Unable to handle kernel NULL pointer dereference at virtual address 00000= 010 > printing eip: > c0135f3e > *pde =3D 00000000 > Oops: 0000 > CPU: 0 > EIP: 0010:[] Not tainted > EFLAGS: 00010286 > eax: 00001000 ebx: 0000000e ecx: 00000008 edx: 00002012 > esi: 00000008 edi: 00002012 ebp: 00000000 esp: c13edd64 > ds: 0018 es: 0018 ss: 0018 > Process swapper (pid: 1, threadinfo=3Dc13ec000 task=3Dc13ea040) > Stack: 00001000 00002012 00000000 d3d09c00 d3d09c00 c01365e8 00000000 000= 02012=20 > 00001000 d3d09c00 d4834000 d48453ec c01367ef 00000000 00002012 000= 01000=20 > d3d09c00 c01b2196 00000000 00002012 00001000 00000306 00000000 d3d= 09d54=20 > Call Trace: [] [] [] [] []=20 > [] [] [] [] [] []=20 > [] [] [] [] [] []=20 > []=20 >=20 > Code: 0f b7 45 10 b0 00 66 0f b6 55 10 01 d0 0f b7 c0 89 44 24 10=20 > <0>Kernel panic: Attempted to kill init! > =20 >=20 > Loading 2.5.7-p1................... > s=08 =08Linux version 2.5.7-pre1 (alex@numbers) (gcc version 2.95.4 20011= 002 (Debian prerelease)) #2 Thu Mar 14 15:50:33 GMT 2002 > BIOS-provided physical RAM map: > BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) > BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) > BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) > BIOS-e820: 0000000000100000 - 0000000013fc0000 (usable) > BIOS-e820: 0000000013fc0000 - 0000000013ff8000 (ACPI data) > BIOS-e820: 0000000013ff8000 - 0000000014000000 (ACPI NVS) > BIOS-e820: 00000000ffb80000 - 00000000ffc00000 (reserved) > BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) > 319MB LOWMEM available. > On node 0 totalpages: 81856 > zone(0): 4096 pages. > zone(1): 77760 pages. > zone(2): 0 pages. > Kernel command line: BOOT_IMAGE=3D2.5.7-p1 ro root=3D306 console=3DttyS0,= 9600n8 console=3Dtty0 > Local APIC disabled by BIOS -- reenabling. > Found and enabled local APIC! > Initializing CPU#0 > Detected 930.254 MHz processor. > Console: colour VGA+ 80x25 > Calibrating delay loop... 1854.66 BogoMIPS > Memory: 321084k/327424k available (1471k kernel code, 5952k reserved, 476= k data, 208k init, 0k highmem) > Dentry-cache hash table entries: 65536 (order: 7, 524288 bytes) > Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) > Mount-cache hash table entries: 512 (order: 0, 4096 bytes) > Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes) > Page-cache hash table entries: 131072 (order: 7, 524288 bytes) > CPU: L1 I cache: 16K, L1 D cache: 16K > CPU: L2 cache: 256K > Intel machine check architecture supported. > Intel machine check reporting enabled on CPU#0. > CPU: Intel Pentium III (Coppermine) stepping 06 > Enabling fast FPU save and restore... done. > Enabling unmasked SIMD FPU exception support... done. > Checking 'hlt' instruction... OK. > POSIX conformance testing by UNIFIX > enabled ExtINT on CPU#0 > ESR value before enabling vector: 00000000 > ESR value after enabling vector: 00000000 > Using local APIC timer interrupts. > calibrating APIC timer ... > ..... CPU clock speed is 930.2702 MHz. > ..... host bus clock speed is 132.8955 MHz. > cpu: 0, clocks: 1328955, slice: 664477 > CPU0 > mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) > mtrr: detected mtrr type: Intel > Linux NET4.0 for Linux 2.4 > Based upon Swansea University Computer Society NET3.039 > Initializing RT netlink socket > PCI: PCI BIOS revision 2.10 entry at 0xfda95, last bus=3D2 > PCI: Using configuration type 1 > PCI: Probing PCI hardware > Unknown bridge resource 0: assuming transparent > PCI: Discovered primary peer bus 08 [IRQ] > PCI: Using IRQ router PIIX [8086/2440] at 00:1f.0 > Starting kswapd > BIO: pool of 256 setup, 14Kb (56 bytes/bio) > biovec: init pool 0, 1 entries, 12 bytes > biovec: init pool 1, 4 entries, 48 bytes > biovec: init pool 2, 16 entries, 192 bytes > biovec: init pool 3, 64 entries, 768 bytes > biovec: init pool 4, 128 entries, 1536 bytes > biovec: init pool 5, 256 entries, 3072 bytes > Journalled Block Device driver loaded > Installing knfsd (copyright (C) 1996 okir@monad.swb.de). > ACPI: Core Subsystem version [20011018] > ACPI: Subsystem enabled > Power Resource: found > Power Resource: found > Power Resource: found > Power Resource: found > ACPI: System firmware supports S0 S1 S4 S5 > Processor[0]: C0 C1 > ACPI: Power Button (FF) found > ACPI: Sleep Button (CM) found > pty: 256 Unix98 ptys configured > Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL= _PCI enabled > ttyS00 at 0x03f8 (irq =3D 4) is a 16550A > Real Time Clock Driver v1.11 > block: 256 slots per queue, batch=3D32 > Linux video capture interface: v1.00 > Linux agpgart interface v0.99 (c) Jeff Hartmann > agpgart: Maximum main memory to use for agp memory: 262M > agpgart: Detected Intel i815 chipset > agpgart: AGP aperture is 64M @ 0xf8000000 > Uniform Multi-Platform E-IDE driver ver.:7.0.0 > ide: system bus speed 33MHz > Intel Corp. 82820 820 (Camino 2) Chipset IDE U100: IDE controller on PCI = slot 00:1f.1 > Intel Corp. 82820 820 (Camino 2) Chipset IDE U100: chipset revision 2 > Intel Corp. 82820 820 (Camino 2) Chipset IDE U100: not 100% native mode: = will probe irqs later > ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:DMA > ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio > hda: QUANTUM FIREBALLlct20 20, ATA DISK drive > hdb: SAMSUNG SV2044D, ATA DISK drive > hdc: MATSHITADVD-ROM SR-8586, ATAPI CD/DVD-ROM drive > ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 > ide1 at 0x170-0x177,0x376 on irq 15 > blk: queue c034de0c, I/O limit 4095Mb (mask 0xffffffff) > hda: 39876480 sectors (20417 MB) w/418KiB Cache, CHS=3D39560/16/63, UDMA(= 33) > blk: queue c034e02c, I/O limit 4095Mb (mask 0xffffffff) > hdb: 39862368 sectors (20410 MB) w/472KiB Cache, CHS=3D39546/16/63, UDMA(= 66) > Partition check: > hda: [PTBL] [2482/255/63] hda1 hda3 < hda5 hda6 hda7 hda8 hda9 hda10 hda= 11 hda12 hda13 > > hdb: hdb1 hdb2 hdb3 < hdb5 hdb6 hdb7 hdb8 hdb9 hdb10 > > usb.c: registered new driver usbfs > usb.c: registered new driver hub > uhci.c: USB Universal Host Controller Interface driver v1.1 > PCI: Found IRQ 3 for device 00:1f.2 > PCI: Setting latency timer of device 00:1f.2 to 64 > uhci.c: USB UHCI at I/O 0xef40, IRQ 3 > hcd.c: new USB bus registered, assigned bus number 1 > hub.c: USB hub found at / > hub.c: 2 ports detected > PCI: Found IRQ 9 for device 00:1f.4 > PCI: Setting latency timer of device 00:1f.4 to 64 > uhci.c: USB UHCI at I/O 0xef80, IRQ 9 > hcd.c: new USB bus registered, assigned bus number 2 > hub.c: USB hub found at / > hub.c: 2 ports detected > usb.c: registered new driver hid > hid-core.c: v1.31:USB HID core driver > mice: PS/2 mouse device common for all mice > NET4: Linux TCP/IP 1.0 for NET4.0 > IP Protocols: ICMP, UDP, TCP, IGMP > IP: routing cache hash table of 2048 buckets, 16Kbytes > TCP: Hash tables configured (established 32768 bind 32768) > ip_conntrack (2558 buckets, 20464 max) > ip_tables: (C) 2000-2002 Netfilter core team > NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. > found reiserfs format "3.5" with standard journal > Unable to handle kernel NULL pointer dereference at virtual address 00000= 010 > printing eip: > c01362de > *pde =3D 00000000 > Oops: 0000 > CPU: 0 > EIP: 0010:[] Not tainted > EFLAGS: 00010292 > eax: 00001000 ebx: 0000000e ecx: 00000008 edx: 00002012 > esi: 00000008 edi: 00002012 ebp: 00000000 esp: c13edd6c > ds: 0018 es: 0018 ss: 0018 > Process swapper (pid: 1, threadinfo=3Dc13ec000 task=3Dc13ea040) > Stack: 00001000 00002012 00000000 d3d09c00 d3d09c00 c0136988 00000000 000= 02012=20 > 00001000 d3d09c00 d4834000 d48453ec c0136b8f 00000000 00002012 000= 01000=20 > d3d09c00 c01b26f6 00000000 00002012 00001000 00000306 00000000 d3d= 09d54=20 > Call Trace: [] [] [] [] []=20 > [] [] [] [] [] []=20 > [] [] [] [] [] []=20 > [] []=20 >=20 > Code: 0f b7 45 10 b0 00 66 0f b6 55 10 01 d0 0f b7 c0 89 44 24 10=20 > <0>Kernel panic: Attempted to kill init! > =20 --HcAYCG3uE/tztfnV Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename="00-jdev_bd_merging_fix.diff" --- linux-2.5.6/fs/reiserfs/journal.c.orig Tue Mar 12 15:25:27 2002 +++ linux-2.5.6/fs/reiserfs/journal.c Tue Mar 12 15:26:47 2002 @@ -1958,8 +1958,7 @@ SB_ONDISK_JOURNAL_DEVICE( super ) ? to_kdev_t(SB_ONDISK_JOURNAL_DEVICE( super )) : super -> s_dev; /* there is no "jdev" option and journal is on separate device */ - if( ( !jdev_name || !jdev_name[ 0 ] ) && - SB_ONDISK_JOURNAL_DEVICE( super ) ) { + if( ( !jdev_name || !jdev_name[ 0 ] ) ) { journal -> j_dev_bd = bdget( kdev_t_to_nr( jdev ) ); if( journal -> j_dev_bd ) result = blkdev_get( journal -> j_dev_bd, @@ -1974,9 +1973,6 @@ return result; } - /* no "jdev" option and journal is on the host device */ - if( !jdev_name || !jdev_name[ 0 ] ) - return 0; journal -> j_dev_file = filp_open( jdev_name, 0, 0 ); if( !IS_ERR( journal -> j_dev_file ) ) { struct inode *jdev_inode; --HcAYCG3uE/tztfnV-- - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/