lkml.org 
[lkml]   [2002]   [Jan]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    Date
    From
    Subjectfalse positives on disk change checks


    On Thu, 31 Jan 2002, Kris Urquhart wrote:

    > No patches - linux-2.4.17 right off of www.linux.org.
    >
    > The chipset is an ALI 1487/1489.
    > The disk itself is a JUMPtec DISKchip with a SanDisk 20-99-00024-1 on it.
    >
    > The relevant lines from dmesg are:
    > Uniform Multi-Platform E-IDE driver Revision: 6.31
    > ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
    > hda: SunDisk SDTB-128, ATA DISK drive
    > ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
    > hda: 31360 sectors (16 MB) w/1KiB Cache, CHS=490/2/32
    > Partition check:
    > hda: hda1 hda2 hda3
    >
    > % cat /proc/ide/driver
    > ide-disk version 1.10
    >
    > There is a CONFIG_BLK_DEV_ALI14XX, but apparently it only turns on
    > support for the second channel. I tried it anyway (along with the
    > ide0=ali14xx boot parameter), but the disk was then not recognized
    > at boot time (busy/timeout during partition check). A google search
    > did not turn up any problems with ali14xx.c since 2.0.

    Andre, looks like setup above gives false positives on disk change check...


    -
    To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
    the body of a message to majordomo@vger.kernel.org
    More majordomo info at http://vger.kernel.org/majordomo-info.html
    Please read the FAQ at http://www.tux.org/lkml/

    \
     
     \ /
      Last update: 2005-03-22 13:16    [W:2.612 / U:0.012 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site