Messages in this thread | | | Date | Tue, 6 Mar 2001 05:34:05 -0500 (EST) | From | God <> | Subject | Re: Linux 2.4.2-ac12 |
| |
On Mon, 5 Mar 2001, Scott M. Hoffman wrote:
> On Mon, 5 Mar 2001, Richard B. Johnson wrote: > > > > I -- S T R O N G L Y -- suggest that nobody use this kernel with > > a BusLogic SCSI controller until this problem is fixed. > > > > Dick Johnson > > It may not be related, but out of five boot attempts, only one got past > the IDE driver stage(ie, below from 2.4.2 : > VP_IDE: IDE controller on PCI bus 00 dev 39 > VP_IDE: chipset revision 16 > VP_IDE: not 100% native mode: will probe irqs later > ide: Assuming 33MHz system bus speed for PIO modes; override with > idebus=xx > VP_IDE: VIA vt82c596b (rev 23) IDE UDMA66 controller on pci00:07.1 > ide0: BM-DMA at 0xe000-0xe007, BIOS settings: hda:DMA, hdb:DMA > ide1: BM-DMA at 0xe008-0xe00f, BIOS settings: hdc:DMA, hdd:DMA) > I've had 2.4.2 running great for the past 10 days. Need any more info?
heh... I had (probably still do), the same problem. Took me a few boots before it would get passed the drives (this was right after upgrading to 2.4.2).
PIIX4: IDE controller on PCI bus 00 dev 21 PIIX4: chipset revision 1 PIIX4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xd800-0xd807, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xd808-0xd80f, BIOS settings: hdc:DMA, hdd:DMA hda: QUANTUM FIREBALL CX6.4A, ATA DISK drive hdb: ST33210A, ATA DISK drive hdc: WDC AC2340F, ATA DISK drive hdd: ATAPI CD-ROM DRIVE 40X MAXIMUM, ATAPI CD/DVD-ROM drive
Other then the fact that as I look down at the drive activity light on the case, it's lit ... things from a IO standpoint seem to be ok .. (and I hope it stays that way) ...
btw, for the curious:
# iostat Linux 2.4.2 (scotch) 03/06/2001
tty: tin tout avg-cpu: %user %nice %sys %idle %iowait 0 0 1.09 0.00 0.69 0.00 98.22 Disks: tps Blk_read/s Blk_wrtn/s Blk_read Blk_wrtn hdisk0 0.00 0.00 0.00 0 0 hdisk1 0.00 0.00 0.00 0 0 hdisk2 0.00 0.00 0.00 0 0
# hdparm -I /dev/hdd hdd: drive_cmd: status=0x51 { DriveReady SeekComplete Error } hdd: drive_cmd: error=0x04
/dev/hdd: hdd: drive_cmd: status=0x58 { DriveReady SeekComplete DataRequest } HDIO_DRIVE_CMD(identify) failed: Input/output error
Doesn't matter what I have hdparm do to the drive, after running a function the drive / bus activity light turns off ...
Thoughts?
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |