lkml.org 
[lkml]   [2001]   [Mar]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
Shane Wegner wrote:
>
> Hi,
>
> Whenever I write a substantial amount of data (200mb) to
> disk, I get these messages. The disks lock for about 10
> seconds and then come back for about 10 seconds again.
> This continues until the data is successfully written.
>
> ide_dmaproc: chipset supported ide_dma_timeout func only: 14
> hde: irq timeout: status=0x58 { DriveReady SeekComplete DataRequest }
> hde: DMA disabled
It looks like you have set your drive for a dma mode it doesn't support.

HTH

Mike
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2005-03-22 13:29    [W:0.031 / U:0.004 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site